UNT Scholarly Works - 65 Matching Results

Search Results

Results: 1 - 24 next
open access

Accelerometer-Based Automated Counting of Ten Exercises without Exercise-Specific Training or Tuning

Description: Article presents research that creates an automatic repetition counting system that is flexible enough to measure multiple distinct and repeating movements during physical therapy without being trained on the specific motion.
Date: October 10, 2020
Creator: Zelman, Samuel; Dow, Michael; Tabashum, Thasina; Xiao, Ting & Albert, Mark
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Accessibility and Mechanical Stability of Nanoporous Zinc Oxide and Aluminum Oxide Coatings Synthesized via Infiltration of Polymer Templates

Description: Article describes how the conformal nanoporous inorganic coatings with accessible pores that are stable under applied thermal and mechanical stresses represent an important class of materials used in the design of sensors, optical coatings, and biomedical systems. Authors synthesize porous AlOx and ZnO coatings by the sequential infiltration synthesis (SIS) of two types of polymers that enable the design of porous conformal coatings.
Date: October 14, 2023
Creator: Omotosho, Khalil D.; Lyon, Zachary; Shevchenko, Elena V. & Berman, Diana
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Adaptive Control Optimization of Cutting Parameters for High Quality Machining Operations based on Neural Networks and Search Algorithms

Description: This book chapter presents an Adaptive Control with Optimization (ACO) system for optimising a multi-objective function based on material removal rate, quality loss function related to surface roughness, and cutting-tool life subjected to surface roughness specifications constraint.
Date: October 1, 2008
Creator: Abellan, J. V.; Romero, F.; Siller Carrillo, Héctor Rafael; Estruch, A. & Vila, C.
Item Type: Refine your search to only Book Chapter
Partner: UNT College of Engineering
open access

agroString: Visibility and Provenance through a Private Blockchain Platform for Agricultural Dispense towards Consumers

Description: Article discusses the large quantities of farm and meat products that rot and are wasted if correct actions are not taken leading to serious health concerns if consumed. Because there is no proper system for tracking and communicating the status of goods to consumers, a right which according to the authors should be a given, they propose a method of increased communication using Corda private blockchain.
Date: October 27, 2022
Creator: Vangipuram, Sukrutha L. T.; Mohanty, Saraju P.; Kougianos, Elias & Ray, Chittaranjan
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Autoencoder Composite Scoring to Evaluate Prosthetic Performance in Individuals with Lower Limb Amputation

Description: Authors of the article created an overall assessment metric using a deep learning autoencoder to directly compare clinical outcomes in a comparison of lower limb amputees using two different prosthetic devices—a mechanical knee and a microprocessor-controlled knee. The proposed methods were used on data collected from ten participants with a dysvascular transfemoral amputation recruited for a prosthetics research study.
Date: October 18, 2022
Creator: Tabashum, Thasina; Xiao, Ting; Jayaraman, Chandrasekaran; Mummidisetty, Chaithanya K.; Jayaraman, Arun & Albert, Mark
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Bioactive glass coatings on metallic implants for biomedical applications

Description: Article provides a detailed overview of the benefits and issues of metal alloys when used as biomedical implants and how they are improved by bioactive glass-based coatings for biomedical applications.
Date: October 5, 2019
Creator: Oliver, Joy-anne N.; Su, Yingchao; Lu, Xiaonan; Kuo, Po Hsuen; Du, Jincheng & Zhu, Donghui
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Characterization of Soft Tooling Photopolymers and Processes for Micromixing Devices with Variable Cross-Section

Description: Article characterizing an assortment of photopolymers and stereolithography processes to produce 3D-printed molds and polydimethylsiloxane (PDMS) castings of micromixing devices. The study shows that 3D-printed soft tooling can provide other benefits such as multiple cross-sections and other potential layouts on a single mold.
Date: October 29, 2020
Creator: Martínez-López, J. Israel; Cervantes, Héctor Andrés Betancourt; Iturbe, Luis Donaldo Cuevas; Vázquez, Elisa; Naula, Edisson A.; Martínez López, Alejandro et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

A Computational Study on the Aeroacoustics of a Multi-Rotor Unmanned Aerial System

Description: Article studying the noise generated by a quadrotor biplane unmanned aerial system (UAS) for various conditions in terms of the UAS pitch angle, propellers rotating velocity (RPM), and the UAS speed to understand the physics involved in its aeroacoustics and structure-borne noise.
Date: October 18, 2021
Creator: Heydari, Morteza; Sadat Hosseini, Seyed Hamid & Singh, Rajneesh
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

A consensus statement on detection of hippocampal sharp wave ripples and differentiation from other fast oscillations

Description: Article suggests that common standards for recording, detection, and reporting for intracranial recordings in humans that suggest their role in episodic and semantic memory does not exist. Authors of the article outline the methodological challenges involved in detecting ripple events and offer practical recommendations to improve separation from other high-frequency oscillations, and argue that shared experimental, detection, and reporting standards will provide a solid foundation for future t… more
Date: October 12, 2022
Creator: Liu, Anli A.; Henin, Simon; Abbaspoor, Saman; Bragin, Anatol; Buffalo, Elizabeth A.; Farrell, Jordan S. et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Correlation between bonding, vacancy migration mechanisms, and creep in model binary and ternary hcp-Mg solid solutions

Description: Article compares in-plane (IP) and out-of-plane (OOP) vacancy migration mechanisms in binary Mg–X (Ca, Y, and Gd) and ternary Mg–X (Ca, Y, and Gd)–Zn alloys using density functional theory based first principles computations.
Date: October 13, 2020
Creator: Paranjape, Priyanvada; Srinivasan, S. G. & Choudhuri, Deep
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Editorial: Superlubricity across the scales

Description: Article talks about how while the idea of frictionless surfaces and the associated implications of vanishing energy losses during mechanical motion have been part of science fiction culture, scientists in the real world work toward realizing this ambitious goal that was once thought to be unattainable. The overarching goal of the research topic titled “Superlubricity Across the Scales” is to provide a snapshot of the latest developments in this rapidly accelerating field of research.
Date: October 26, 2022
Creator: Baykara, Mehmet Z.; Berman, Diana & Rosenkranz, Andreas
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Effect of composition and thermal history on deformation behavior and cluster connections in model bulk metallic glasses

Description: Article describes the compositional dependence and influence of relaxation state on the deformation behavior of a Pt–Pd-based bulk metallic glasses model system was investigated, where platinum is systematically replaced by topologically equivalent palladium atoms. Based on total scattering experiments with synchrotron X-ray radiation, a correlation between the increase in stiffer 3-atom cluster connections and reduction in strain-rate sensitivity, as a measure of ductility, with Pd content and… more
Date: October 12, 2022
Creator: Neuber, Nico; Sadeghilaridjani, Maryam; Ghodki, Nandita; Gross, Oliver; Adam, Bastian; Ruschel, Lucas et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Effect of Laser Shock Peening Parameters on Residual Stresses and Corrosion Fatigue of AA5083

Description: Article examining Aluminium alloy 5083 subjected to Laser Shock Peening both with (LSP) and without protective coating (LPwC) at multiple pulse densities. A second LPwC treatment was conducted fully submersed under water, in addition to the standard laminar water flow condition. Results show that compressive residual stresses were generated in all cases, although their character varied depending on the peening strategy and method of confinement.
Date: October 14, 2021
Creator: Kaufman, Jan; Špirit, Zbyněk; Vasudevan, Vijay K.; Steiner, Matthew Alan; Mannava, Seetha Ramaiah; Brajer, Jan et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Evaluation of Uniformity of Bamboo Bundle Veneer and Bamboo Bundle Laminated Veneer Lumber (BLVL)

Description: In this article the density uniformity and mechanical properties of bamboo bundle veneers were systematically evaluated by the combination of light transmittance and mechanical stiffness. It was found that the number of broomings, dippings, and high-temperature heat treatments had different effects on the bamboo bundle veneers. On this basis, the uniformity of the density and mechanical properties of the bamboo scrimber (BS) that underwent hybrid paving, and the bamboo bundle laminated veneer l… more
Date: October 19, 2019
Creator: Zhou, Haiying; Wei, Xin; Smith, Lee M.; Wang, Ge & Chen, Fuming
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

An experimental design to study decommitment in a collaborative multi-agent system in a scheduling domain

Description: This article describes the theoretical background and experimental design of new research based on previous multi-agent research on collaborative agents. The research extends the concept of agent decommitment into a resource scheduling domain. The problem is no longer time constrained, however, the number of agents is increased dramatically. The actual experimentation is yet to be performed. The authors state that results of the experimentation will be reported in a future article.
Date: October 4, 2017
Creator: Van Dyne, Michele & Tsatsoulis, Costas
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Fabrication of wide-IF 200–300GHz superconductor–insulator–superconductor mixers with suspended metal beam leads formed on silicon-on-insulator

Description: This article reports on a fabrication process that uses silicon-oninsulator (SOI) substrates and micromachining techniques to form wide-IF superconductor–insulator–superconductor (SIS) mixer devices that have suspended metal beam leads for rf grounding. Aside from a description of the fabrication process, electrical measurements of these Nb/Al–AlNₓ /Nb trilayer devices will also be presented.
Date: October 7, 2004
Creator: Kaul, Anupama; Bumble, Bruce; Lee, Karen A.; LeDuc, Henry G.; Rice, Frank & Zmuidzinas, Jonas
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Gas tungsten arc welding of as-cast AlCoCrFeNi2.1 eutectic high entropy alloy

Description: Article states that the AlCoCrFeNi2.1 eutectic high entropy alloy is of great interest due to its unique mechanical properties combining both high strength and plasticity. This work establishes the potential for using arc-based welding for joining eutectic high entropy alloys.
Date: October 5, 2022
Creator: Shen, Jiajia; Agrawal, Priyanka; Rodrigues, Tiago A.; Lopes, J.G.; Schell, N.; Zeng, Zhi et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
Back to Top of Screen