Search Results

open access

A Study of the Physical Facilities of Industrial Arts Metalworking Laboratories in the State of Texas

Description: The purposes for conducting this study were to ascertain whether the housing for industrial arts metalworking laboratories was adequate, whether the enrollment of the school showed any correlation with the availability of a metalworking facility, and to what extent the physical facility for metalworking laboratories met current standards.
Date: December 1972
Creator: Teague, Ben W.
Partner: UNT Libraries
open access

To Determine the Present Relation of Mechanical Drawing to other Courses Taught in Junior High Schools of the North Texas Area and to Recommend an Outline for a Mechanical Drawing Course that will have a High Relationship to other Courses

Description: The purposes of this study were to determine the relations of mechanical drawing to other courses taught in the junior high schools of the North Texas area and to propose an outline for a course of study in junior high school mechanical drawing that will have a high relationship with other courses.
Date: 1947
Creator: Nelson, A. Frank
Partner: UNT Libraries
open access

A Survey to Determine Whether Additional Industrial Arts Teachers are Needed for Work in Institutions for Physically and Mentally Handicapped Children and to Suggest Special Preparation for These Teachers

Description: The purpose of this study was to collect and present data relative to the teaching of industrial arts in certain special institutions for physically and mentally handicapped children with a view to ascertaining (1) the need for additional industrial arts teachers, and (2), the needs of such teachers for special preparation.
Date: 1947
Creator: Johnson, Nick A.
Partner: UNT Libraries
open access

Design and Construction of Auxiliary Equipment Used to Convert a Standard Woodworking Shaper for Use as a Finger-Jointing Machine

Description: The problem was to design and construct the necessary equipment to cut and fasten short stock end to end using finger-joints. The study was divided into five chapters: I contained the introduction to the problem; II was concerned with the design and construction of the equipment; III detailed the operation of the equipment; IV contained the presentation of the data; and V covered the summary and findings. The study concluded that the equipment could be constructed inexpensively, and would perfo… more
Date: August 1976
Creator: Kuenstler, David R.
Partner: UNT Libraries
open access

A Proposed Industrial Arts General Shop Curriculum for Pauline G. Hughes Middle School, Burleson Independent School District

Description: This study was made to gather data and information to aid the Burleson Independent School District in initiating an industrial arts general shop program in the Pauline G. Hughes Middle School. The data and information were obtained from the Texas Education Agency, the Burleson Independent School District records, the vocational director, the assistant superintendent, a questionnaire, and the Brodhead-Garrett 1976-1977 Catalog. The majority of the general shop programs in the north Texas area co… more
Date: May 1978
Creator: Adams, William Leroy.
Partner: UNT Libraries
open access

The Use of Closed Circuit Television as an Implement of Industrial Security

Description: The problem of this study was to determine to what extent industry was making use of closed circuit television as an implement of industrial security. The data for this study were provided by a group of thirty-two security chiefs of industry, and by another group of fifteen law enforcement officials in the Dallas and Fort Worth Metropolitan area. Of those industrial concerns making use of closed circuit television as an aid to security, a majority use the medium for surveillance of controlled a… more
Date: December 1976
Creator: Kirkpatrick, Edwin F.
Partner: UNT Libraries
open access

The Role of Industrial Arts in Career Education

Description: This study seeks to provide a descriptive analysis of the role of industrial arts in career education. The criteria used as a basis for comparison of industrial arts and career education are (1) clarification of terminology, (2) historical trends in the development of both programs, (3) basic program philosophies, (4) curriculum content, (5) objectives and goals sought by each curriculum, and (6) legislation affecting industrial arts and career education. Career education is more extensive than… more
Date: December 1977
Creator: Pinnell, Charles C.
Partner: UNT Libraries
open access

Noise in School Power Laboratories: Its Effects and Control

Description: This study was made to find the effects of noise on the human body, to measure sound levels that exist in school power laboratories, and to design and evaluate the effectiveness of two noise control devices. An accurately calibrated testing device was used to measure sound levels in an attempt to determine if excessive noise exists in school power laboratories and to find the extent to which such noise can be reduced by shielding or enclosing the engine test area. It was found that noise has un… more
Date: August 1976
Creator: Schwab, David L.
Partner: UNT Libraries
open access

A Study of Modern Automotive Tune-Up Equipment Used in Fort Worth, Texas

Description: The problem with which this investigation was concerned was that of determining the use of modern automotive tune-up equipment as used by the automotive garages in the Fort Worth area. The data for this study were provided by fifteen garages of the Fort Worth area. Of the Fort Worth garages using electronic equipment to perform a tune-up, few appear to have the adequate equipment and few appear to make more use of the equipment. In addition, a deficiency seems evident in the use of the electron… more
Date: August 1977
Creator: Shabbot, Kadhum
Partner: UNT Libraries
open access

Skills and Knowledge Required of Employees in the Steel Fabrication Industry in the Greater Fort Worth Metropolitan Area

Description: This study was designed to determine the employment opportunities in the steel fabrication industry of the Greater Fort Worth Metropolitan Area, and to ascertain what skills and knowledge were required of the prospective employee and which of these skills were being taught in the Industrial Arts metalworking laboratories. The Machine Metalworking I & II curriculum was established and related to information gained through a questionnaire sent to participating steel fabrication firms. The study w… more
Date: May 1976
Creator: McPeak, W. Dennis
Partner: UNT Libraries
open access

Foundry Facilities in Industrial Arts Programs in the State of Texas

Description: The problem of this study was to determine how much foundry equipment exists in the high schools of Texas and to determine to what extent it is being utilized. The data for this study were provided by thirty-seven metalworking instructors of Texas high schools. Of the Texas high schools offering metalworking as a part of the industrial arts curriculum, few appear to have adequate foundry facilities. In addition, a deficiency seems evident in the background and training in foundry of the metalwo… more
Date: May 1976
Creator: Lange, Robert Douglas
Partner: UNT Libraries
open access

Expanding the Numerical Control Version of Computer Graphics to Include Automatically Computed Machine Feeds and Speeds

Description: The objective of the study is to utilize the cross-sectional computation capabilities of a computer to calculate the revolutions per minute, to determine the volume of metal being removed by the machine cutter at any point in the programmed path, and to output the feed rate that the particular situation requires. The six chapters which present the information are as follows: Chapter I, introduction; Chapter II, analysis of factors affecting the computation of speed and feed rate parameters; Cha… more
Date: August 1979
Creator: Berry, Ronny E.
Partner: UNT Libraries
open access

The History of the Industrial Arts Department of North Texas State University from 1955 To 1975

Description: This history is designed to study the Industrial Arts Department at North Texas State University, The study is broken down into the areas of enrollment trends, the faculty, the curriculum, and the physical facilities. This study found that the Industrial Arts Department's class card enrollment remained relatively stable from 1955 to 1975. There was little fluctuation in semester credit hours in the Industrial Arts Department from 1955 to 1975. This study also found that the curriculum of the de… more
Date: December 1977
Creator: Barber, Gerald L.
Partner: UNT Libraries
open access

A Study of Safety in the Industrial Plastics Laboratories in the Secondary Schools of the Fort Worth Independent School District

Description: This study was conducted in order to determine what safety practices and procedures were employed in the industrial plastics laboratories in the secondary schools of the Fort Worth Independent School District. Data were obtained from literature in the field of safety education in industrial arts and from an information form mailed to the teachers of industrial plastics in the Fort Worth Independent School District. Hazardous conditions were found to exist in a majority of the laboratories due … more
Date: August 1976
Creator: Curtis, Ronald W.
Partner: UNT Libraries
open access

A Survey of the Graduates of Technical High School, Dallas Texas, from 1936-1945 to Determine the Effectiveness of the Training Program

Description: The purpose of the study is to analyze the results of a survey of the graduates of Technical High School in Dallas since 1938 to determine the effectiveness of the training given by the school in helping the graduate choose an occupation and giving him skills and attitudes that will help him get a job and make a good worker.
Date: 1947
Creator: Butler, James A.
Partner: UNT Libraries
open access

A Study of the Success of 209 Graduates of the Houston Public Schools on the Basis of their Wages and Increases in Wages

Description: The problem of this study is to make a comparative analysis of the success, based on wages and increases in wages, of 209 students. There were 103 students who had completed Type "B" vocational training and 106 high school graduates who had not completed or taken Type "B" vocational training in the Houston Public Schools.
Date: 1951
Creator: Herring, Arthur D.
Partner: UNT Libraries
open access

A Study and Evaluation of the Lighting in the Industrial Arts Shops of the Fort Worth Public Schools

Description: There are many factors to be considered when studying the lighting of industrial arts shops. Adequate light is one of the most important factors, and by adequate lighting is meant light that is sufficient in quantity and quality. Other factors to be considered include the location of the shops in the building, the windows, interior painting, width, and length, and the ceiling height of the shoprooms. The study herein is directed toward better lighting in the industrial arts shops for more effic… more
Date: 1951
Creator: King, Marvin D.
Partner: UNT Libraries
Back to Top of Screen