You limited your search to:

 Department: Department of Electrical Engineering
 Collection: UNT Theses and Dissertations
AirSniffer: A Smartphone-Based Sensor Module for Personal Micro-Climate Monitoring

AirSniffer: A Smartphone-Based Sensor Module for Personal Micro-Climate Monitoring

Date: May 2016
Creator: Smith, Jeffrey Paul
Description: Environmental factors can have a significant impact on an individual's health and well-being, and a primary characteristic of environments is air quality. Air sensing equipment is available to the public, but it is often expensive,stationary, or unusable for persons without technical expertise. The goal of this project is to develop an inexpensive and portable sensor module for public use. The system is capable of measuring temperature in Celsius and Fahrenheit, heat index, relative humidity, and carbon dioxide concentration. The sensor module, referred to as the "sniffer," consists of a printed circuit board that interconnects a carbon dioxide sensor, a temperature/humidity sensor, an Arduino microcontroller, and a Bluetooth module. The sniffer is small enough to be worn as a pendant or a belt attachment, and it is rugged enough to consistently collect and transmit data to a user's smartphone throughout their workday. The accompanying smartphone app uses Bluetooth and GPS hardware to collect data and affix samples with a time stamp and GPS coordinates. The accumulated sensor data is saved to a file on the user's phone, which is then examined on a standard computer.
Contributing Partner: UNT Libraries
Implementation of an Unmanned Aerial Vehicle for New Generation Peterbilt Trucks

Implementation of an Unmanned Aerial Vehicle for New Generation Peterbilt Trucks

Date: May 2016
Creator: Srinivasan K, Venkatesh
Description: As science and technology continue to advance, innovative developments in transportation can enhance product safety and security for the benefit and welfare of society. The federal government requires every commercial truck to be inspected before each trip. This pre-trip inspection ensures the safe mechanical condition of each vehicle before it is used. An Unmanned Aerial Vehicle (UAV) could be used to provide an automated inspection, thus reducing driver workload, inspection costs and time while increasing inspection accuracy. This thesis develops a primary component of the algorithm that is required to implement UAV pre-trip inspections for commercial trucks using an android-based application. Specifically, this thesis provides foundational work of providing stable height control in an outdoor environment using a laser sensor and an android flight control application that includes take-off, landing, throttle control, and real-time video transmission. The height algorithm developed is the core of this thesis project. Phantom 2 Vision+ uses a pressure sensor to calculate the altitude of the drone for height stabilization. However, these altitude readings do not provide the precision required for this project. Rather, the goal of autonomously controlling height with great precision necessitated the use of a laser rangefinder sensor in the development of the ...
Contributing Partner: UNT Libraries
Parameter Estimation of Microwave Filters

Parameter Estimation of Microwave Filters

Access: Use of this item is restricted to the UNT Community.
Date: December 2015
Creator: Sun, Shuo
Description: The focus of this thesis is on developing theories and techniques to extract lossy microwave filter parameters from data. In the literature, the Cauchy methods have been used to extract filters’ characteristic polynomials from measured scattering parameters. These methods are described and some examples are constructed to test their performance. The results suggest that the Cauchy method does not work well when the Q factors representing the loss of filters are not even. Based on some prototype filters and the relationship between Q factors and the loss, we conduct preliminary studies on alternative representations of the characteristic polynomials. The parameters in these new models are extracted using the Levenberg–Marquardt algorithm to accurately estimate characteristic polynomials and the loss information.
Contributing Partner: UNT Libraries
An Arduino Based Control System for a Brackish Water Desalination Plant

An Arduino Based Control System for a Brackish Water Desalination Plant

Date: August 2015
Creator: Caraballo, Ginna
Description: Water scarcity for agriculture is one of the most important challenges to improve food security worldwide. In this thesis we study the potential to develop a low-cost controller for a small scale brackish desalination plant that consists of proven water treatment technologies, reverse osmosis, cation exchange, and nanofiltration to treat groundwater into two final products: drinking water and irrigation water. The plant is powered by a combination of wind and solar power systems. The low-cost controller uses Arduino Mega, and Arduino DUE, which consist of ATmega2560 and Atmel SAM3X8E ARM Cortex-M3 CPU microcontrollers. These are widely used systems characterized for good performance and low cost. However, Arduino also requires drivers and interfaces to allow the control and monitoring of sensors and actuators. The thesis explains the process, as well as the hardware and software implemented.
Contributing Partner: UNT Libraries
Design of Frequency Output Pressure Transducer

Design of Frequency Output Pressure Transducer

Date: August 2015
Creator: Ma, Jinge
Description: Piezoelectricity crystal is used in different area in industry, such as downhole oil, gas industry, and ballistics. The piezoelectricity crystals are able to create electric fields due to mechanical deformation called the direct piezoelectric effect, or create mechanical deformation due to the effect of electric field called the indirect piezoelectric effect. In this thesis, piezoelectricity effect is the core part. There are 4 parts in the frequency output pressure transducer: two crystal oscillators, phase-locked loop (PLL), mixer, frequency counter. Crystal oscillator is used to activate the piezoelectricity crystal which is made from quartz. The resonance frequency of the piezoelectricity crystal will be increased with the higher pressure applied. The signal of the resonance frequency will be transmitted to the PLL. The function of the PLL is detect the frequency change in the input signal and makes the output of the PLL has the same frequency and same phase with the input signal. The output of the PLL will be transmitted to a Mixer. The mixer has two inputs and one output. One input signal is from the pressure crystal oscillator and another one is from the reference crystal oscillator. The frequency difference of the two signal will transmitted to the ...
Contributing Partner: UNT Libraries
Modeling and Control of a Motor System Using the Lego Ev3 Robot

Modeling and Control of a Motor System Using the Lego Ev3 Robot

Date: August 2015
Creator: Mitchell, Ashley C.
Description: In this thesis, I present my work on the modeling and control of a motor system using the Lego EV3 robot. The overall goal is to apply introductory systems and controls engineering techniques for estimation and design to a real-world system. First I detail the setup of materials used in this research: the hardware used was the Lego EV3 robot; the software used was the Student 2014 version of Simulink; a wireless network was used to communicate between them using a Netgear WNA1100 wifi dongle. Next I explain the approaches used to model the robot’s motor system: from a description of the basic system components, to data collection through experimentation with a proportionally controlled feedback loop, to parameter estimation (through time-domain specification relationships, Matlab’s curve-fitting toolbox, and a formal least-squares parameter estimation), to the discovery of the effects of frictional disturbance and saturation, and finally to the selection and verification of the final model through comparisons of simulated step responses of the estimated models to the actual time response of the motor system. Next I explore three different types of controllers for use within the motor system: a proportional controller, a lead compensator, and a PID controller. I catalogue the ...
Contributing Partner: UNT Libraries
A Preliminary Controller Design for Drone Carried Directional Communication System

A Preliminary Controller Design for Drone Carried Directional Communication System

Date: August 2015
Creator: AL-Emrani, Firas
Description: In this thesis, we conduct a preliminary study on the controller design for directional antenna devices carried by drones. The goal of the control system is to ensure the best alignment between two directional antennas so as to enhance the performance of air-to-air communication between the drones. The control system at the current stage relies on the information received from GPS devices. The control system includes two loops: velocity loop and position loop to suppress wind disturbances and to assure the alignment of two directional antennae. The simulation and animation of directional antennae alignment control for two-randomly moving drones was developed using SIMULINK. To facilitate RSSI-based antenna alignment control to be conducted in the future work, a study on initial scanning techniques is also included at the end of this thesis.
Contributing Partner: UNT Libraries
Design of Multi Band Microwave Devices Using Coupled Line Transmission Lines

Design of Multi Band Microwave Devices Using Coupled Line Transmission Lines

Date: May 2015
Creator: Katakam, Sri
Description: Multi band technology helps in getting multiple operating frequencies using a single microwave device. This thesis presents the design of dual and tri band microwave devices using coupled transmission line structures. Chapter 2 presents the design of a novel dual band transmission line structure using coupled lines. In chapter 3, Design of a dual band branch line coupler and a dual band Wilkinson power divider are proposed using the novel dual band transmission line structure presented in the previous chapter. In chapter 4, Design of a tri band transmission line structure by extending the dual band structure is presented. The Conclusion and future work are presented in chapter 5.
Contributing Partner: UNT Libraries
Dual-Band Quarter Wavelength and Half Wavelength Microstrip Transmission Line Design

Dual-Band Quarter Wavelength and Half Wavelength Microstrip Transmission Line Design

Date: May 2015
Creator: Imran, Md Asheque
Description: The thesis represents the design for dual-band quarter wavelength and half wavelength microstrip transmission line. Chapter 2 proposed the design of a novel dual-band asymmetric pi-shaped short-circuited quarter wavelength microstrip transmission line working at frequencies 1GHz and 1.55 GHz for 50Ω transmission line and at frequencies 1GHz and 1.43GHz for 60Ω transmission line. Chapter 3 proposed the design of a novel dual-band quarter wavelength microstrip transmission line with asymmetrically allocated open stubs and short-circuited stubs working at frequencies 1GHz and 1.32GHz. Chapter 4 proposed the design of dual-band pi-shaped open stub half wavelength microstrip transmission line working at frequencies 1GHz and 2.07GHz. Numerical simulations are performed both in HyperLynx 3D EM and in circuit simulator ADS for all of the proposed designs to measure the return loss (S11) and insertion loss (S12) in dB and phase response for S12 in degree.
Contributing Partner: UNT Libraries
Practical Robust MIMO OFDM Communication System for High-Speed Mobile Communication

Practical Robust MIMO OFDM Communication System for High-Speed Mobile Communication

Date: May 2015
Creator: Grabner, Mitchell John James
Description: This thesis presents the design of a communication system (PRCS) which improves on all aspects of the current state of the art 4G communication system Long Term Evolution (LTE) including peak to average power ratio (PAPR), data reliability, spectral efficiency and complexity using the most recent state of the art research in the field combined with novel implementations. This research is relevant and important to the field of electrical and communication engineering because it provides benefits to consumers in the form of more reliable data with higher speeds as well as a reduced burden on hardware original equipment manufacturers (OEMs). The results presented herein show up to a 3 dB reduction in PAPR, less than 10-5 bit errors at 7.5 dB signal to noise ratio (SNR) using 4QAM, up to 3 times increased throughput in the uplink mode and 10 times reduced channel coding complexity.
Contributing Partner: UNT Libraries
Quantitative Correlation Analysis of Motor and Dysphonia Features of Parkinsons Disease

Quantitative Correlation Analysis of Motor and Dysphonia Features of Parkinsons Disease

Date: May 2015
Creator: Koduri, Balaram
Description: The research reported here deals with the early characterization of Parkinson’s disease (PD), the second most common degenerative disease of the human motor system after Alzheimer’s. PD results from the death of dopaminergic neurons in the substantia nigra region of the brain. Its occurrence is highly correlated with the aging population whose numbers increase with the healthcare benefits of a longer life. Observation of motor control symptoms associated with PD, such as gait and speech analysis, is most often used to evaluate, detect, and diagnose PD. Since speech and some delicate motor functions have provided early detection signs of PD, reliable analysis of these features is a promising objective diagnostic technique for early intervention with any remedial measures. We implement and study here three PD diagnostic methods and their correlation between each other’s results and with the motor functions in subjects diagnosed with and without PD. One initial test documented well in the literature deals with feature analysis of voice during phonation to determine dysphonia measures. Features of the motor function of two fingers were extracted in tests titled “Motor function of alternating finger tapping on a computer keyboard” and “Motor function of the index and thumb finger tapping with ...
Contributing Partner: UNT Libraries
WiFi Networks through Directional Antenna: An Experimental Study

WiFi Networks through Directional Antenna: An Experimental Study

Date: May 2015
Creator: Gu, Yixin
Description: In situations where information infrastructure is destroyed or not available, on-demand information infrastructure is pivotal for the success of rescue missions. In this paper, a drone-carried on demand information infrastructure for long-distance WiFi transmission system is developed. It can be used in the areas including emergency response, public event, and battlefield. The WiFi network can be connected to the Internet to extend WiFi access to areas where WiFi and other Internet infrastructures are not available. In order to establish a local area network to propagate WIFI service, directional antennas and wireless routers are used to create it. Due to unstable working condition on the flying drones, a precise heading turning stage is designed to maintain the two directional antennas facing to each other. Even if external interferences change the heading of the drones, the stages will automatically rotate back to where it should be to offset the bias. Also, to maintain the same flying altitude, a ground controller is designed to measure the height of the drones so that the directional antennas can communicate to each other successfully. To verify the design of the whole system, quite a few field experiments were performed. Experiments results indicates the design is reliable, ...
Contributing Partner: UNT Libraries
Networking and Decentralized Control in Layered Networks: a Theoretical Study and Test-bed Development

Networking and Decentralized Control in Layered Networks: a Theoretical Study and Test-bed Development

Date: December 2014
Creator: Sheth, Vardhman Jayeshkumar
Description: Layered structures are commonly used in communication systems, but their roles in decentralized control are not understood well. In the first part of this thesis, a theoretical study of consensus (a typical decentralized control task) in layered structures is conducted. The unique graph topology approach permits explicit characterization of consensus performance based on simple graphical characteristics of MLMG structures. In the second part of this thesis, a generic LEGO test-bed to mimic multi-domain communication with layered structures is described. A search-and-rescue scenario is implemented to demonstrate the use of the test-bed.
Contributing Partner: UNT Libraries
Optimal Sensor Placement for Structural Health Monitoring

Optimal Sensor Placement for Structural Health Monitoring

Date: December 2014
Creator: Movva, Gopichand
Description: In large-scale civil structures, a limited number of sensors are placed to monitor the health of civil structures to reduce maintenance, communication and energy costs. In this thesis, the problem of optimal sensor location placement to infer the health of civil structures is explored. First, a comparative study of approaches from the fields of control engineering and civil engineering is conducted . The widely used civil engineering approaches such as effective independence (EI) and modal assurance criterion (MAC) have limitations because of the negligence of modes and damping parameters. On the other hand, control engineering approaches consider the entire system dynamics using impulse response-type sensor measurement data. Such inference can be formulated as an estimation problem, with the dynamics formulated as a second-order differential equation. The comparative study suggests that damping dynamics play significant impact to the selection of best sensor location---the civil engineering approaches that neglect the damping dynamics lead to very different sensor locations from those of the control engineering approaches. In the second part of the thesis, an initial attempt to directly connect the topological graph of the structure (that defines the damping and stiffness matrices) and the second-order dynamics is conducted.
Contributing Partner: UNT Libraries
Reliability of Electronics

Reliability of Electronics

Date: December 2014
Creator: Wickstrom, Larry E
Description: The purpose of this research is not to research new technology but how to improve existing technology and understand how the manufacturing process works. Reliability Engineering fall under the category of Quality Control and uses predictions through statistical measurements and life testing to figure out if a specific manufacturing technique will meet customer satisfaction. The research also answers choice of materials and choice of manufacturing process to provide a device that will not only meet but exceed customer demand. Reliability Engineering is one of the final testing phases of any new product development or redesign.
Contributing Partner: UNT Libraries
An Application of Digital Video Recording and Off-grid Technology to Burrowing Owl Conservation Research

An Application of Digital Video Recording and Off-grid Technology to Burrowing Owl Conservation Research

Date: August 2014
Creator: Williams, Jennifer M.
Description: Through this research, engineering students and conservation biologists constructed an off-grid video system for observing western burrowing owls in El Paso, Texas. The burrowing owl has a declining population and their range decreasing, driving scientists' interest to see inside the den for observing critical nesting behavior. Texas Parks and Wildlife Department (TPWD) biologists wanted videos from inside the dark, isolated hillside owl burrows. This research yielded a replicable multi-camera prototype, empowering others to explore applications of engineering and wildlife monitoring. The remote station used an off-the-shelf video recording system, solar panels, charge controller, and lead acid batteries. Four local K-12 science educators participated in system testing at Lake Ray Roberts State Park through the Research Experiences for Teachers (RET, NSF #1132585) program, as well as four undergraduate engineering students as senior design research.
Contributing Partner: UNT Libraries
Design Space Exploration of Domain Specific Cgras Using Crowd-sourcing

Design Space Exploration of Domain Specific Cgras Using Crowd-sourcing

Date: August 2014
Creator: Sistla, Anil Kumar
Description: CGRAs (coarse grained reconfigurable array architectures) try to fill the gap between FPGAs and ASICs. Over three decades, the research towards CGRA design has produced number of architectures. Each of these designs lie at different points on a line drawn between FPGAs and ASICs, depending on the tradeoffs and design choices made during the design of architectures. Thus, design space exploration (DSE) takes a very important role in the circuit design process. In this work I propose the design space exploration of CGRAs can be done quickly and efficiently through crowd-sourcing and a game driven approach based on an interactive mapping game UNTANGLED and a design environment called SmartBricks. Both UNTANGLED and SmartBricks have been developed by our research team at Reconfigurable Computing Lab, UNT. I present the results of design space exploration of domain-specific reconfigurable architectures and compare the results comparing stripe vs mesh style, heterogeneous vs homogeneous. I also compare the results obtained from different interconnection topologies in mesh. These results show that this approach offers quick DSE for designers and also provides low power architectures for a suite of benchmarks. All results were obtained using standard cell ASICs with 90 nm process.
Contributing Partner: UNT Libraries
Dynamic Wifi Fingerprinting Indoor Positioning System

Dynamic Wifi Fingerprinting Indoor Positioning System

Date: August 2014
Creator: Costilla Reyes, Omar
Description: A technique is proposed to improve the accuracy of indoor positioning systems based on WIFI radio-frequency signals by using dynamic access points and fingerprints (DAFs). Moreover, an indoor position system that relies solely in DAFs is proposed. The walking pattern of indoor users is classified as dynamic or static for indoor positioning purposes. I demonstrate that the performance of a conventional indoor positioning system that uses static fingerprints can be enhanced by considering dynamic fingerprints and access points. The accuracy of the system is evaluated using four positioning algorithms and two random access point selection strategies. The system facilitates the location of people where there is no wireless local area network (WLAN) infrastructure deployed or where the WLAN infrastructure has been drastically affected, for example by natural disasters. The system can be used for search and rescue operations and for expanding the coverage of an indoor positioning system.
Contributing Partner: UNT Libraries
The Effect of Mobility on Wireless Sensor Networks

The Effect of Mobility on Wireless Sensor Networks

Date: August 2014
Creator: Hasir, Ibrahim
Description: Wireless sensor networks (WSNs) have gained attention in recent years with the proliferation of the micro-electro-mechanical systems, which has led to the development of smart sensors. Smart sensors has brought WSNs under the spotlight and has created numerous different areas of research such as; energy consumption, convergence, network structures, deployment methods, time delay, and communication protocols. Convergence rates associated with information propagations of the networks will be questioned in this thesis. Mobility is an expensive process in terms of the associated energy costs. In a sensor network, mobility has significant overhead in terms of closing old connections and creating new connections as mobile sensor nodes move from one location to another. Despite these drawbacks, mobility helps a sensor network reach an agreement more quickly. Adding few mobile nodes to an otherwise static network will significantly improve the network’s ability to reach consensus. This paper shows the effect of the mobility on convergence rate of the wireless sensor networks, through Eigenvalue analysis, modeling and simulation.
Contributing Partner: UNT Libraries
An Interactive Framework for Teaching Fundamentals of Digital Logic Design and VLSI Design

An Interactive Framework for Teaching Fundamentals of Digital Logic Design and VLSI Design

Date: August 2014
Creator: Battina, Brahmasree
Description: Integrated Circuits (ICs) have a broad range of applications in healthcare, military, consumer electronics etc. The acronym VLSI stands for Very Large Scale Integration and is a process of making ICs by placing millions of transistors on a single chip. Because of advancements in VLSI design technologies, ICs are getting smaller, faster in speed and more efficient, making personal devices handy, and with more features. In this thesis work an interactive framework is designed in which the fundamental concepts of digital logic design and VLSI design such as logic gates, MOS transistors, combinational and sequential logic circuits, and memory are presented in a simple, interactive and user friendly way to create interest in students towards engineering fields, especially Electrical Engineering and Computer Engineering. Most of the concepts are explained in this framework by taking the examples which we see in our daily lives. Some of the critical design concerns such as power and performance are presented in an interactive way to make sure that students can understand these significant concepts in an easy and user friendly way.
Contributing Partner: UNT Libraries
Teaching Fundamentals of Digital Logic Design and Vlsi Design Using Computational Textiles

Teaching Fundamentals of Digital Logic Design and Vlsi Design Using Computational Textiles

Date: August 2014
Creator: Inampudi, Sivateja
Description: This thesis presents teaching fundamentals of digital logic design and VLSI design for freshmen and even for high school students using e-textiles. This easily grabs attention of students as it is creative and interesting. Using e-textiles to project these concepts would be easily understood by students at young age. This involves stitching electronic circuits on a fabric using basic components like LEDs, push buttons and so on. The functioning of these circuits is programmed in Lilypad Arduino. By using this method, students get exposed to basic electronic concepts at early stage which eventually develops interest towards engineering field.
Contributing Partner: UNT Libraries
Design and Application of a New Planar Balun

Design and Application of a New Planar Balun

Date: May 2014
Creator: Mohamed, Younes
Description: The baluns are the key components in balanced circuits such balanced mixers, frequency multipliers, push–pull amplifiers, and antennas. Most of these applications have become more integrated which demands the baluns to be in compact size and low cost. In this thesis, a new approach about the design of planar balun is presented where the 4-port symmetrical network with one port terminated by open circuit is first analyzed by using even- and odd-mode excitations. With full design equations, the proposed balun presents perfect balanced output and good input matching and the measurement results make a good agreement with the simulations. Second, Yagi-Uda antenna is also introduced as an entry to fully understand the quasi-Yagi antenna. Both of the antennas have the same design requirements and present the radiation properties. The arrangement of the antenna’s elements and the end-fire radiation property of the antenna have been presented. Finally, the quasi-Yagi antenna is used as an application of the balun where the proposed balun is employed to feed a quasi-Yagi antenna. The antenna is working in the S-band radio frequency and achieves a measured 36% fractional bandwidth for return loss less than -10 dB. The antenna demonstrates a good agreement between its measurement ...
Contributing Partner: UNT Libraries
Design of Tunable/Reconfigurable and Compact Microwave Devices

Design of Tunable/Reconfigurable and Compact Microwave Devices

Date: May 2014
Creator: Zhou, Mi
Description: With the rapid development of the modern technology, radio frequency and microwave systems are playing more and more important roles. Since the time the first microwave device was invented, they have been leading not only the military but also our daily life to a new era. In order to make the devices have more practical applications, more and more strict requirements have been imposed. For example, good adaptability, reduced cost and shrank size are highly required. In this thesis, three devices are designed based on this requirement. At first, a symmetric four-port microwave varactor based 90-degree directional coupler with tunable coupling ratios and reconfigurable responses is presented. The proposed coupler is designed based on the modified structure of a crossover, where varactors are loaded. Then, a novel reconfigurable 3-dB directional coupler is presented. Varactors and inductors are loaded to the device to realize the reconfigurable performance. By adjusting the voltage applied to the varactors, the proposed coupler can be reconfigured from a branch-line coupler (90-degree coupler) to a rat-race coupler (180 degree coupler) and vice versa. At last, two types (Type-I and Type-II) of microwave baluns with generalized structures are presented. Different from the conventional transmission-line-based baluns where λ/2 transmission ...
Contributing Partner: UNT Libraries
Development of a Cost Effective Wireless Sensor System for Indoor Air Quality Monitoring Applications

Development of a Cost Effective Wireless Sensor System for Indoor Air Quality Monitoring Applications

Date: May 2014
Creator: Abraham, Sherin
Description: Poor air quality can greatly affect the public health. Research studies indicate that indoor air can be more polluted than the outdoor air. An indoor air quality monitoring system will help to create an awareness of the quality of air inside which will eventually help in improving it. The objective of this research is to develop a low cost wireless sensor system for indoor air quality monitoring. The major cost reduction of the system is achieved by using low priced sensors. Interface circuits had to be designed to make these sensors more accurate. The system is capable of measuring carbon dioxide, carbon monoxide, ozone, temperature, humidity and volatile organic compounds. The prototype sensor node modules were developed. The sensor nodes were the connected together by Zigbee network. The nodes were developed in such a way that it is compact in size and wireless connection of sensor nodes enable to collect air quality data from multiple locations simultaneously. The collected data was stored in a computer. We employed linear least-square approach for the calibration of each sensor to derive a conversion formula for converting the sensor readings to engineering units. The system was tested with different pollutants and data collected was ...
Contributing Partner: UNT Libraries
FIRST PREV 1 2 3 NEXT LAST