You limited your search to:
- Bayesian Probabilistic Reasoning Applied to Mathematical Epidemiology for Predictive Spatiotemporal Analysis of Infectious Diseases
- Abstract Probabilistic reasoning under uncertainty suits well to analysis of disease dynamics. The stochastic nature of disease progression is modeled by applying the principles of Bayesian learning. Bayesian learning predicts the disease progression, including prevalence and incidence, for a geographic region and demographic composition. Public health resources, prioritized by the order of risk levels of the population, will efficiently minimize the disease spread and curtail the epidemic at the earliest. A Bayesian network representing the outbreak of influenza and pneumonia in a geographic region is ported to a newer region with different demographic composition. Upon analysis for the newer region, the corresponding prevalence of influenza and pneumonia among the different demographic subgroups is inferred for the newer region. Bayesian reasoning coupled with disease timeline is used to reverse engineer an influenza outbreak for a given geographic and demographic setting. The temporal flow of the epidemic among the different sections of the population is analyzed to identify the corresponding risk levels. In comparison to spread vaccination, prioritizing the limited vaccination resources to the higher risk groups results in relatively lower influenza prevalence. HIV incidence in Texas from 1989-2002 is analyzed using demographic based epidemic curves. Dynamic Bayesian networks are integrated with probability distributions of HIV surveillance data coupled with the census population data to estimate the proportion of HIV incidence among the different demographic subgroups. Demographic based risk analysis lends to observation of varied spectrum of HIV risk among the different demographic subgroups. A methodology using hidden Markov models is introduced that enables to investigate the impact of social behavioral interactions in the incidence and prevalence of infectious diseases. The methodology is presented in the context of simulated disease outbreak data for influenza. Probabilistic reasoning analysis enhances the understanding of disease progression in order to identify the critical points of surveillance, control and prevention. Public health resources, prioritized by the order of risk levels of the population, will efficiently minimize the disease spread and curtail the epidemic at the earliest.
- A Dual Dielectric Approach for Performance Aware Reduction of Gate Leakage in Combinational Circuits
- Design of systems in the low-end nanometer domain has introduced new dimensions in power consumption and dissipation in CMOS devices. With continued and aggressive scaling, using low thickness SiO2 for the transistor gates, gate leakage due to gate oxide direct tunneling current has emerged as the major component of leakage in the CMOS circuits. Therefore, providing a solution to the issue of gate oxide leakage has become one of the key concerns in achieving low power and high performance CMOS VLSI circuits. In this thesis, a new approach is proposed involving dual dielectric of dual thicknesses (DKDT) for the reducing both ON and OFF state gate leakage. It is claimed that the simultaneous utilization of SiON and SiO2 each with multiple thicknesses is a better approach for gate leakage reduction than the conventional usage of a single gate dielectric (SiO2), possibly with multiple thicknesses. An algorithm is developed for DKDT assignment that minimizes the overall leakage for a circuit without compromising with the performance. Extensive experiments were carried out on ISCAS'85 benchmarks using 45nm technology which showed that the proposed approach can reduce the leakage, as much as 98% (in an average 89.5%), without degrading the performance.
- Flexible Digital Authentication Techniques
- Abstract This dissertation investigates authentication techniques in some emerging areas. Specifically, authentication schemes have been proposed that are well-suited for embedded systems, and privacy-respecting pay Web sites. With embedded systems, a person could own several devices which are capable of communication and interaction, but these devices use embedded processors whose computational capabilities are limited as compared to desktop computers. Examples of this scenario include entertainment devices or appliances owned by a consumer, multiple control and sensor systems in an automobile or airplane, and environmental controls in a building. An efficient public key cryptosystem has been devised, which provides a complete solution to an embedded system, including protocols for authentication, authenticated key exchange, encryption, and revocation. The new construction is especially suitable for the devices with constrained computing capabilities and resources. Compared with other available authentication schemes, such as X.509, identity-based encryption, etc, the new construction provides unique features such as simplicity, efficiency, forward secrecy, and an efficient re-keying mechanism. In the application scenario for a pay Web site, users may be sensitive about their privacy, and do not wish their behaviors to be tracked by Web sites. Thus, an anonymous authentication scheme is desirable in this case. That is, a user can prove his/her authenticity without revealing his/her identity. On the other hand, the Web site owner would like to prevent a bunch of users from sharing a single subscription while hiding behind user anonymity. The Web site should be able to detect these possible malicious behaviors, and exclude corrupted users from future service. This dissertation extensively discusses anonymous authentication techniques, such as group signature, direct anonymous attestation, and traceable signature. Three anonymous authentication schemes have been proposed, which include a group signature scheme with signature claiming and variable linkability, a scheme for direct anonymous attestation in trusted computing platforms with sign and verify protocols nearly seven times more efficient than the current solution, and a state-of-the-art traceable signature scheme with support for variable anonymity. These three schemes greatly advance research in the area of anonymous authentication. The authentication techniques presented in this dissertation are based on common mathematical and cryptographical foundations, sharing similar security assumptions. We call them flexible digital authentication schemes.
- An Integrated Architecture for Ad Hoc Grids
- Extensive research has been conducted by the grid community to enable large-scale collaborations in pre-configured environments. grid collaborations can vary in scale and motivation resulting in a coarse classification of grids: national grid, project grid, enterprise grid, and volunteer grid. Despite the differences in scope and scale, all the traditional grids in practice share some common assumptions. They support mutually collaborative communities, adopt a centralized control for membership, and assume a well-defined non-changing collaboration. To support grid applications that do not confirm to these assumptions, we propose the concept of ad hoc grids. In the context of this research, we propose a novel architecture for ad hoc grids that integrates a suite of component frameworks. Specifically, our architecture combines the community management framework, security framework, abstraction framework, quality of service framework, and reputation framework. The overarching objective of our integrated architecture is to support a variety of grid applications in a self-controlled fashion with the help of a self-organizing ad hoc community. We introduce mechanisms in our architecture that successfully isolates malicious elements from the community, inherently improving the quality of grid services and extracting deterministic quality assurances from the underlying infrastructure. We also emphasize on the technology-independence of our architecture, thereby offering the requisite platform for technology interoperability. The feasibility of the proposed architecture is verified with a high-quality ad hoc grid implementation. Additionally, we have analyzed the performance and behavior of ad hoc grids with respect to several control parameters.
- Modeling and reduction of gate leakage during behavioral synthesis of nanoscale CMOS circuits.
Access: Use of this item is restricted to the UNT Community.
The major sources of power dissipation in a nanometer CMOS circuit are capacitive switching, short-circuit current, static leakage and gate oxide tunneling. However, with the aggressive scaling of technology the gate oxide direct tunneling current (gate leakage) is emerging as a prominent component of power dissipation. For sub-65 nm CMOS technology where the gate oxide (SiO2) thickness is very low, the direct tunneling current is the major form of tunneling. There are two contribution parts in this thesis: analytical modeling of behavioral level components for direct tunneling current and propagation delay, and the reduction of tunneling current during behavioral synthesis. Gate oxides of multiple thicknesses are useful in reducing the gate leakage dissipation. Analytical models from first principles to calculate the tunneling current and the propagation delay of behavioral level components is presented, which are backed by BSIM4/5 models and SPICE simulations. These components are characterized for 45 nm technology and an algorithm is provided for scheduling of datapath operations such that the overall tunneling current dissipation of a datapath circuit under design is minimal. It is observed that the oxide thickness that is being considered is very low it may not remain constant during the course of fabrication. Hence the algorithm takes process variation into consideration. Extensive experiments are conducted for various behavioral level benchmarks under various constraints and observed significant reductions, as high as 75.3% (with an average of 64.3%).
- Towards Communicating Simple Sentence using Pictorial Representations
- Language can sometimes be an impediment in communication. Whether we are talking about people who speak different languages, students who are learning a new language, or people with language disorders, the understanding of linguistic representations in a given language requires a certain amount of knowledge that not everybody has. In this thesis, we propose "translation through pictures" as a means for conveying simple pieces of information across language barriers, and describe a system that can automatically generate pictorial representations for simple sentences. Comparative experiments conducted on visual and linguistic representations of information show that a considerable amount of understanding can be achieved through pictorial descriptions, with results within a comparable range of those obtained with current machine translation techniques. Moreover, a user study conducted around the pictorial translation system reveals that users found the system to generally produce correct word/image associations, and rate the system as interactive and intelligent.
- Using Reinforcement Learning in Partial Order Plan Space
Access: Use of this item is restricted to the UNT Community.
Partial order planning is an important approach that solves planning problems without completely specifying the orderings between the actions in the plan. This property provides greater flexibility in executing plans; hence making the partial order planners a preferred choice over other planning methodologies. However, in order to find partially ordered plans, partial order planners perform a search in plan space rather than in space of world states and an uninformed search in plan space leads to poor efficiency. In this thesis, I discuss applying a reinforcement learning method, called First-visit Monte Carlo method, to partial order planning in order to design agents which do not need any training data or heuristics but are still able to make informed decisions in plan space based on experience. Communicating effectively with the agent is crucial in reinforcement learning. I address how this task was accomplished in plan space and the results from an evaluation of a blocks world test bed.
- Group-EDF: A New Approach and an Efficient Non-Preemptive Algorithm for Soft Real-Time Systems
- Hard real-time systems in robotics, space and military missions, and control devices are specified with stringent and critical time constraints. On the other hand, soft real-time applications arising from multimedia, telecommunications, Internet web services, and games are specified with more lenient constraints. Real-time systems can also be distinguished in terms of their implementation into preemptive and non-preemptive systems. In preemptive systems, tasks are often preempted by higher priority tasks. Non-preemptive systems are gaining interest for implementing soft-real applications on multithreaded platforms. In this dissertation, I propose a new algorithm that uses a two-level scheduling strategy for scheduling non-preemptive soft real-time tasks. Our goal is to improve the success ratios of the well-known earliest deadline first (EDF) approach when the load on the system is very high and to improve the overall performance in both underloaded and overloaded conditions. Our approach, known as group-EDF (gEDF), is based on dynamic grouping of tasks with deadlines that are very close to each other, and using a shortest job first (SJF) technique to schedule tasks within the group. I believe that grouping tasks dynamically with similar deadlines and utilizing secondary criteria, such as minimizing the total execution time can lead to new and more efficient real-time scheduling algorithms. I present results comparing gEDF with other real-time algorithms including, EDF, best-effort, and guarantee scheme, by using randomly generated tasks with varying execution times, release times, deadlines and tolerances to missing deadlines, under varying workloads. Furthermore, I implemented the gEDF algorithm in the Linux kernel and evaluated gEDF for scheduling real applications.
- Modeling Infectious Disease Spread Using Global Stochastic Field Simulation
- Susceptibles-infectives-removals (SIR) and its derivatives are the classic mathematical models for the study of infectious diseases in epidemiology. In order to model and simulate epidemics of an infectious disease, a global stochastic field simulation paradigm (GSFS) is proposed, which incorporates geographic and demographic based interactions. The interaction measure between regions is a function of population density and geographical distance, and has been extended to include demographic and migratory constraints. The progression of diseases using GSFS is analyzed, and similar behavior to the SIR model is exhibited by GSFS, using the geographic information systems (GIS) gravity model for interactions. The limitations of the SIR and similar models of homogeneous population with uniform mixing are addressed by the GSFS model. The GSFS model is oriented to heterogeneous population, and can incorporate interactions based on geography, demography, environment and migration patterns. The progression of diseases can be modeled at higher levels of fidelity using the GSFS model, and facilitates optimal deployment of public health resources for prevention, control and surveillance of infectious diseases.
- Resource Management in Wireless Networks
- A local call admission control (CAC) algorithm for third generation wireless networks was designed and implemented, which allows for the simulation of network throughput for different spreading factors and various mobility scenarios. A global CAC algorithm is also implemented and used as a benchmark since it is inherently optimized; it yields the best possible performance but has an intensive computational complexity. Optimized local CAC algorithm achieves similar performance as global CAC algorithm at a fraction of the computational cost. Design of a dynamic channel assignment algorithm for IEEE 802.11 wireless systems is also presented. Channels are assigned dynamically depending on the minimal interference generated by the neighboring access points on a reference access point. Analysis of dynamic channel assignment algorithm shows an improvement by a factor of 4 over the default settings of having all access points use the same channel, resulting significantly higher network throughput.
- VLSI Architecture and FPGA Prototyping of a Secure Digital Camera for Biometric Application
- This thesis presents a secure digital camera (SDC) that inserts biometric data into images found in forms of identification such as the newly proposed electronic passport. However, putting biometric data in passports makes the data vulnerable for theft, causing privacy related issues. An effective solution to combating unauthorized access such as skimming (obtaining data from the passport's owner who did not willingly submit the data) or eavesdropping (intercepting information as it moves from the chip to the reader) could be judicious use of watermarking and encryption at the source end of the biometric process in hardware like digital camera or scanners etc. To address such issues, a novel approach and its architecture in the framework of a digital camera, conceptualized as an SDC is presented. The SDC inserts biometric data into passport image with the aid of watermarking and encryption processes. The VLSI (very large scale integration) architecture of the functional units of the SDC such as watermarking and encryption unit is presented. The result of the hardware implementation of Rijndael advanced encryption standard (AES) and a discrete cosine transform (DCT) based visible and invisible watermarking algorithm is presented. The prototype chip can carry out simultaneous encryption and watermarking, which to our knowledge is the first of its kind. The encryption unit has a throughput of 500 Mbit/s and the visible and invisible watermarking unit has a max frequency of 96.31 MHz and 256 MHz respectively.
- An Approach Towards Self-Supervised Classification Using Cyc
- Due to the long duration required to perform manual knowledge entry by human knowledge engineers it is desirable to find methods to automatically acquire knowledge about the world by accessing online information. In this work I examine using the Cyc ontology to guide the creation of Naïve Bayes classifiers to provide knowledge about items described in Wikipedia articles. Given an initial set of Wikipedia articles the system uses the ontology to create positive and negative training sets for the classifiers in each category. The order in which classifiers are generated and used to test articles is also guided by the ontology. The research conducted shows that a system can be created that utilizes statistical text classification methods to extract information from an ad-hoc generated information source like Wikipedia for use in a formal semantic ontology like Cyc. Benefits and limitations of the system are discussed along with future work.
- CLUE: A Cluster Evaluation Tool
- Modern high performance computing is dependent on parallel processing systems. Most current benchmarks reveal only the high level computational throughput metrics, which may be sufficient for single processor systems, but can lead to a misrepresentation of true system capability for parallel systems. A new benchmark is therefore proposed. CLUE (Cluster Evaluator) uses a cellular automata algorithm to evaluate the scalability of parallel processing machines. The benchmark also uses algorithmic variations to evaluate individual system components' impact on the overall serial fraction and efficiency. CLUE is not a replacement for other performance-centric benchmarks, but rather shows the scalability of a system and provides metrics to reveal where one can improve overall performance. CLUE is a new benchmark which demonstrates a better comparison among different parallel systems than existing benchmarks and can diagnose where a particular parallel system can be optimized.
- Comparative Study of RSS-Based Collaborative Localization Methods in Wireless Sensor Networks
- In this thesis two collaborative localization techniques are studied: multidimensional scaling (MDS) and maximum likelihood estimator (MLE). A synthesis of a new location estimation method through a serial integration of these two techniques, such that an estimate is first obtained using MDS and then MLE is employed to fine-tune the MDS solution, was the subject of this research using various simulation and experimental studies. In the simulations, important issues including the effects of sensor node density, reference node density and different deployment strategies of reference nodes were addressed. In the experimental study, the path loss model of indoor environments is developed by determining the environment-specific parameters from the experimental measurement data. Then, the empirical path loss model is employed in the analysis and simulation study of the performance of collaborative localization techniques.
- Comparison and Evaluation of Existing Analog Circuit Simulator using Sigma-Delta Modulator
Access: Use of this item is restricted to the UNT Community.
In the world of VLSI (very large scale integration) technology, there are many different types of circuit simulators that are used to design and predict the circuit behavior before actual fabrication of the circuit. In this thesis, I compared and evaluated existing circuit simulators by considering standard benchmark circuits. The circuit simulators which I evaluated and explored are Ngspice, Tclspice, Winspice (open source) and Spectre® (commercial). I also tested standard benchmarks using these circuit simulators and compared their outputs. The simulators are evaluated using design metrics in order to quantify their performance and identify efficient circuit simulators. In addition, I designed a sigma-delta modulator and its individual components using the analog behavioral language Verilog-A. Initially, I performed simulations of individual components of the sigma-delta modulator and later of the whole system. Finally, CMOS (complementary metal-oxide semiconductor) transistor-level circuits were designed for the differential amplifier, operational amplifier and comparator of the modulator.
- Design and Optimization of Components in a 45nm CMOS Phase Locked Loop
Access: Use of this item is restricted to the UNT Community.
A novel scheme of optimizing the individual components of a phase locked loop (PLL) which is used for stable clock generation and synchronization of signals is considered in this work. Verilog-A is used for the high level system design of the main components of the PLL, followed by the individual component wise optimization. The design of experiments (DOE) approach to optimize the analog, 45nm voltage controlled oscillator (VCO) is presented. Also a mixed signal analysis using the analog and digital Verilog behavior of components is studied. Overall a high level system design of a PLL, a systematic optimization of each of its components, and an analog and mixed signal behavioral design approach have been implemented using cadence custom IC design tools.
- Energy-Aware Time Synchronization in Wireless Sensor Networks
- I present a time synchronization algorithm for wireless sensor networks that aims to conserve sensor battery power. The proposed method creates a hierarchical tree by flooding the sensor network from a designated source point. It then uses a hybrid algorithm derived from the timing-sync protocol for sensor networks (TSPN) and the reference broadcast synchronization method (RBS) to periodically synchronize sensor clocks by minimizing energy consumption. In multi-hop ad-hoc networks, a depleted sensor will drop information from all other sensors that route data through it, decreasing the physical area being monitored by the network. The proposed method uses several techniques and thresholds to maintain network connectivity. A new root sensor is chosen when the current one's battery power decreases to a designated value. I implement this new synchronization technique using Matlab and show that it can provide significant power savings over both TPSN and RBS.
- Grid-based Coordinated Routing in Wireless Sensor Networks
- Wireless sensor networks are battery-powered ad-hoc networks in which sensor nodes that are scattered over a region connect to each other and form multi-hop networks. These nodes are equipped with sensors such as temperature sensors, pressure sensors, and light sensors and can be queried to get the corresponding values for analysis. However, since they are battery operated, care has to be taken so that these nodes use energy efficiently. One of the areas in sensor networks where an energy analysis can be done is routing. This work explores grid-based coordinated routing in wireless sensor networks and compares the energy available in the network over time for different grid sizes.
- A Language and Visual Interface to Specify Complex Spatial Pattern Mining
Access: Use of this item is restricted to the UNT Community.
The emerging interests in spatial pattern mining leads to the demand for a flexible spatial pattern mining language, on which easy to use and understand visual pattern language could be built. It is worthwhile to define a pattern mining language called LCSPM to allow users to specify complex spatial patterns. I describe a proposed pattern mining language in this paper. A visual interface which allows users to specify the patterns visually is developed. Visual pattern queries are translated into the LCSPM language by a parser and data mining process can be triggered afterwards. The visual language is based on and goes beyond the visual language proposed in literature. I implemented a prototype system based on the open source JUMP framework.
- Mediation on XQuery Views
- The major goal of information integration is to provide efficient and easy-to-use access to multiple heterogeneous data sources with a single query. At the same time, one of the current trends is to use standard technologies for implementing solutions to complex software problems. In this dissertation, I used XML and XQuery as the standard technologies and have developed an extended projection algorithm to provide a solution to the information integration problem. In order to demonstrate my solution, I implemented a prototype mediation system called Omphalos based on XML related technologies. The dissertation describes the architecture of the system, its metadata, and the process it uses to answer queries. The system uses XQuery expressions (termed metaqueries) to capture complex mappings between global schemas and data source schemas. The system then applies these metaqueries in order to rewrite a user query on a virtual global database (representing the integrated view of the heterogeneous data sources) to a query (termed an outsourced query) on the real data sources. An extended XML document projection algorithm was developed to increase the efficiency of selecting the relevant subset of data from an individual data source to answer the user query. The system applies the projection algorithm to decompose an outsourced query into atomic queries which are each executed on a single data source. I also developed an algorithm to generate integrating queries, which the system uses to compose the answers from the atomic queries into a single answer to the original user query. I present a proof of both the extended XML document projection algorithm and the query integration algorithm. An analysis of the efficiency of the new extended algorithm is also presented. Finally I describe a collaborative schema-matching tool that was implemented to facilitate maintaining metadata.
- A Multi-Variate Analysis of SMTP Paths and Relays to Restrict Spam and Phishing Attacks in Emails
Access: Use of this item is restricted to the UNT Community.
The classifier discussed in this thesis considers the path traversed by an email (instead of its content) and reputation of the relays, features inaccessible to spammers. Groups of spammers and individual behaviors of a spammer in a given domain were analyzed to yield association patterns, which were then used to identify similar spammers. Unsolicited and phishing emails were successfully isolated from legitimate emails, using analysis results. Spammers and phishers are also categorized into serial spammers/phishers, recent spammers/phishers, prospective spammers/phishers, and suspects. Legitimate emails and trusted domains are classified into socially close (family members, friends), socially distinct (strangers etc), and opt-outs (resolved false positives and false negatives). Overall this classifier resulted in far less false positives when compared to current filters like SpamAssassin, achieving a 98.65% precision, which is well comparable to the precisions achieved by SPF, DNSRBL blacklists.
- Natural Language Interfaces to Databases
- Natural language interfaces to databases (NLIDB) are systems that aim to bridge the gap between the languages used by humans and computers, and automatically translate natural language sentences to database queries. This thesis proposes a novel approach to NLIDB, using graph-based models. The system starts by collecting as much information as possible from existing databases and sentences, and transforms this information into a knowledge base for the system. Given a new question, the system will use this knowledge to analyze and translate the sentence into its corresponding database query statement. The graph-based NLIDB system uses English as the natural language, a relational database model, and SQL as the formal query language. In experiments performed with natural language questions ran against a large database containing information about U.S. geography, the system showed good performance compared to the state-of-the-art in the field.
- A Netcentric Scientific Research Repository
Access: Use of this item is restricted to the UNT Community.
The Internet and networks in general have become essential tools for disseminating in-formation. Search engines have become the predominant means of finding information on the Web and all other data repositories, including local resources. Domain scientists regularly acquire and analyze images generated by equipment such as microscopes and cameras, resulting in complex image files that need to be managed in a convenient manner. This type of integrated environment has been recently termed a netcentric sci-entific research repository. I developed a number of data manipulation tools that allow researchers to manage their information more effectively in a netcentric environment. The specific contributions are: (1) A unique interface for management of data including files and relational databases. A wrapper for relational databases was developed so that the data can be indexed and searched using traditional search engines. This approach allows data in databases to be searched with the same interface as other data. Fur-thermore, this approach makes it easier for scientists to work with their data if they are not familiar with SQL. (2) A Web services based architecture for integrating analysis op-erations into a repository. This technique allows the system to leverage the large num-ber of existing tools by wrapping them with a Web service and registering the service with the repository. Metadata associated with Web services was enhanced to allow this feature to be included. In addition, an improved binary to text encoding scheme was de-veloped to reduce the size overhead for sending large scientific data files via XML mes-sages used in Web services. (3) Integrated image analysis operations with SQL. This technique allows for images to be stored and managed conveniently in a relational da-tabase. SQL supplemented with map algebra operations is used to select and perform operations on sets of images.
- Power-benefit analysis of erasure encoding with redundant routing in sensor networks.
- One of the problems sensor networks face is adversaries corrupting nodes along the path to the base station. One way to reduce the effect of these attacks is multipath routing. This introduces some intrusion-tolerance in the network by way of redundancy but at the cost of a higher power consumption by the sensor nodes. Erasure coding can be applied to this scenario in which the base station can receive a subset of the total data sent and reconstruct the entire message packet at its end. This thesis uses two commonly used encodings and compares their performance with respect to power consumed for unencoded data in multipath routing. It is found that using encoding with multipath routing reduces the power consumption and at the same time enables the user to send reasonably large data sizes. The experiments in this thesis were performed on the Tiny OS platform with the simulations done in TOSSIM and the power measurements were taken in PowerTOSSIM. They were performed on the simple radio model and the lossy radio model provided by Tiny OS. The lossy radio model was simulated with distances of 10 feet, 15 feet and 20 feet between nodes. It was found that by using erasure encoding, double or triple the data size can be sent at the same power consumption rate as unencoded data. All the experiments were performed with the radio set at a normal transmit power, and later a high transmit power.
- Timing and Congestion Driven Algorithms for FPGA Placement
- Placement is one of the most important steps in physical design for VLSI circuits. For field programmable gate arrays (FPGAs), the placement step determines the location of each logic block. I present novel timing and congestion driven placement algorithms for FPGAs with minimal runtime overhead. By predicting the post-routing timing-critical edges and estimating congestion accurately, this algorithm is able to simultaneously reduce the critical path delay and the minimum number of routing tracks. The core of the algorithm consists of a criticality-history record of connection edges and a congestion map. This approach is applied to the 20 largest Microelectronics Center of North Carolina (MCNC) benchmark circuits. Experimental results show that compared with the state-of-the-art FPGA place and route package, the Versatile Place and Route (VPR) suite, this algorithm yields an average of 8.1% reduction (maximum 30.5%) in the critical path delay and 5% reduction in channel width. Meanwhile, the average runtime of the algorithm is only 2.3X as of VPR.
- CMOS Active Pixel Sensors for Digital Cameras: Current State-of-the-Art
- Image sensors play a vital role in many image sensing and capture applications. Among the various types of image sensors, complementary metal oxide semiconductor (CMOS) based active pixel sensors (APS), which are characterized by reduced pixel size, give fast readouts and reduced noise. APS are used in many applications such as mobile cameras, digital cameras, Webcams, and many consumer, commercial and scientific applications. With these developments and applications, CMOS APS designs are challenging the old and mature technology of charged couple device (CCD) sensors. With the continuous improvements of APS architecture, pixel designs, along with the development of nanometer CMOS fabrications technologies, APS are optimized for optical sensing. In addition, APS offers very low-power and low-voltage operations and is suitable for monolithic integration, thus allowing manufacturers to integrate more functionality on the array and building low-cost camera-on-a-chip. In this thesis, I explore the current state-of-the-art of CMOS APS by examining various types of APS. I show design and simulation results of one of the most commonly used APS in consumer applications, i.e. photodiode based APS. We also present an approach for technology scaling of the devices in photodiode APS to present CMOS technologies. Finally, I present the most modern CMOS APS technologies by reviewing different design models. The design of the photodiode APS is implemented using commercial CAD tools.
- A nano-CMOS based universal voltage level converter for multi-VDD SoCs.
- Power dissipation of integrated circuits is the most demanding issue for very large scale integration (VLSI) design engineers, especially for portable and mobile applications. Use of multiple supply voltages systems, which employs level converter between two voltage islands is one of the most effective ways to reduce power consumption. In this thesis work, a unique level converter known as universal level converter (ULC), capable of four distinct level converting operations, is proposed. The schematic and layout of ULC are built and simulated using CADENCE. The ULC is characterized by performing three analysis such as parametric, power, and load analysis which prove that the design has an average power consumption reduction of about 85-97% and capable of producing stable output at low voltages like 0.45V even under varying load conditions.
- FPGA Implementations of Elliptic Curve Cryptography and Tate Pairing over Binary Field
- Elliptic curve cryptography (ECC) is an alternative to traditional techniques for public key cryptography. It offers smaller key size without sacrificing security level. Tate pairing is a bilinear map used in identity based cryptography schemes. In a typical elliptic curve cryptosystem, elliptic curve point multiplication is the most computationally expensive component. Similarly, Tate pairing is also quite computationally expensive. Therefore, it is more attractive to implement the ECC and Tate pairing using hardware than using software. The bases of both ECC and Tate pairing are Galois field arithmetic units. In this thesis, I propose the FPGA implementations of the elliptic curve point multiplication in GF (2283) as well as Tate pairing computation on supersingular elliptic curve in GF (2283). I have designed and synthesized the elliptic curve point multiplication and Tate pairing module using Xilinx's FPGA, as well as synthesized all the Galois arithmetic units used in the designs. Experimental results demonstrate that the FPGA implementation can speedup the elliptic curve point multiplication by 31.6 times compared to software based implementation. The results also demonstrate that the FPGA implementation can speedup the Tate pairing computation by 152 times compared to software based implementation.
- Split array and scalar data cache: A comprehensive study of data cache organization.
- Existing cache organization suffers from the inability to distinguish different types of localities, and non-selectively cache all data rather than making any attempt to take special advantage of the locality type. This causes unnecessary movement of data among the levels of the memory hierarchy and increases in miss ratio. In this dissertation I propose a split data cache architecture that will group memory accesses as scalar or array references according to their inherent locality and will subsequently map each group to a dedicated cache partition. In this system, because scalar and array references will no longer negatively affect each other, cache-interference is diminished, delivering better performance. Further improvement is achieved by the introduction of victim cache, prefetching, data flattening and reconfigurability to tune the array and scalar caches for specific application. The most significant contribution of my work is the introduction of novel cache architecture for embedded microprocessor platforms. My proposed cache architecture uses reconfigurability coupled with split data caches to reduce area and power consumed by cache memories while retaining performance gains. My results show excellent reductions in both memory size and memory access times, translating into reduced power consumption. Since there was a huge reduction in miss rates at L-1 caches, further power reduction is achieved by partially or completely shutting down L-2 data or L-2 instruction caches. The saving in cache sizes resulting from these designs can be used for other processor activities including instruction and data prefetching, branch-prediction buffers. The potential benefits of such techniques for embedded applications have been evaluated in my work. I also explore how my cache organization performs for non-numeric data structures. I propose a novel idea called "Data flattening" which is a profile based memory allocation technique to compress sparsely scattered pointer data into regular contiguous memory locations and explore the potentials of my proposed Spit cache organization for data treated with data flattening method.
- Automated Syndromic Surveillance using Intelligent Mobile Agents
- Current syndromic surveillance systems utilize centralized databases that are neither scalable in storage space nor in computing power. Such systems are limited in the amount of syndromic data that may be collected and analyzed for the early detection of infectious disease outbreaks. However, with the increased prevalence of international travel, public health monitoring must extend beyond the borders of municipalities or states which will require the ability to store vasts amount of data and significant computing power for analyzing the data. Intelligent mobile agents may be used to create a distributed surveillance system that will utilize the hard drives and computer processing unit (CPU) power of the hosts on the agent network where the syndromic information is located. This thesis proposes the design of a mobile agent-based syndromic surveillance system and an agent decision model for outbreak detection. Simulation results indicate that mobile agents are capable of detecting an outbreak that occurs at all hosts the agent is monitoring. Further study of agent decision models is required to account for localized epidemics and variable agent movement rates.
- The enhancement of machine translation for low-density languages using Web-gathered parallel texts.
- The majority of the world's languages are poorly represented in informational media like radio, television, newspapers, and the Internet. Translation into and out of these languages may offer a way for speakers of these languages to interact with the wider world, but current statistical machine translation models are only effective with a large corpus of parallel texts - texts in two languages that are translations of one another - which most languages lack. This thesis describes the Babylon project which attempts to alleviate this shortage by supplementing existing parallel texts with texts gathered automatically from the Web -- specifically targeting pages that contain text in a pair of languages. Results indicate that parallel texts gathered from the Web can be effectively used as a source of training data for machine translation and can significantly improve the translation quality for text in a similar domain. However, the small quantity of high-quality low-density language parallel texts on the Web remains a significant obstacle.
- High Performance Architecture using Speculative Threads and Dynamic Memory Management Hardware
- With the advances in very large scale integration (VLSI) technology, hundreds of billions of transistors can be packed into a single chip. With the increased hardware budget, how to take advantage of available hardware resources becomes an important research area. Some researchers have shifted from control flow Von-Neumann architecture back to dataflow architecture again in order to explore scalable architectures leading to multi-core systems with several hundreds of processing elements. In this dissertation, I address how the performance of modern processing systems can be improved, while attempting to reduce hardware complexity and energy consumptions. My research described here tackles both central processing unit (CPU) performance and memory subsystem performance. More specifically I will describe my research related to the design of an innovative decoupled multithreaded architecture that can be used in multi-core processor implementations. I also address how memory management functions can be off-loaded from processing pipelines to further improve system performance and eliminate cache pollution caused by runtime management functions.
- Occlusion Tolerant Object Recognition Methods for Video Surveillance and Tracking of Moving Civilian Vehicles
- Recently, there is a great interest in moving object tracking in the fields of security and surveillance. Object recognition under partial occlusion is the core of any object tracking system. This thesis presents an automatic and real-time color object-recognition system which is not only robust but also occlusion tolerant. The intended use of the system is to recognize and track external vehicles entered inside a secured area like a school campus or any army base. Statistical morphological skeleton is used to represent the visible shape of the vehicle. Simple curve matching and different feature based matching techniques are used to recognize the segmented vehicle. Features of the vehicle are extracted upon entering the secured area. The vehicle is recognized from either a digital video frame or a static digital image when needed. The recognition engine will help the design of a high performance tracking system meant for remote video surveillance.
- System and Methods for Detecting Unwanted Voice Calls
- Voice over IP (VoIP) is a key enabling technology for the migration of circuit-switched PSTN architectures to packet-based IP networks. However, this migration is successful only if the present problems in IP networks are addressed before deploying VoIP infrastructure on a large scale. One of the important issues that the present VoIP networks face is the problem of unwanted calls commonly referred to as SPIT (spam over Internet telephony). Mostly, these SPIT calls are from unknown callers who broadcast unwanted calls. There may be unwanted calls from legitimate and known people too. In this case, the unwantedness depends on social proximity of the communicating parties. For detecting these unwanted calls, I propose a framework that analyzes incoming calls for unwanted behavior. The framework includes a VoIP spam detector (VSD) that analyzes incoming VoIP calls for spam behavior using trust and reputation techniques. The framework also includes a nuisance detector (ND) that proactively infers the nuisance (or reluctance of the end user) to receive incoming calls. This inference is based on past mutual behavior between the calling and the called party (i.e., caller and callee), the callee's presence (mood or state of mind) and tolerance in receiving voice calls from the caller, and the social closeness between the caller and the callee. The VSD and ND learn the behavior of callers over time and estimate the possibility of the call to be unwanted based on predetermined thresholds configured by the callee (or the filter administrators). These threshold values have to be automatically updated for integrating dynamic behavioral changes of the communicating parties. For updating these threshold values, I propose an automatic calibration mechanism using receiver operating characteristics curves (ROC). The VSD and ND use this mechanism for dynamically updating thresholds for optimizing their accuracy of detection. In addition to unwanted calls to the callees in a VoIP network, there can be unwanted traffic coming into a VoIP network that attempts to compromise VoIP network devices. Intelligent hackers can create malicious VoIP traffic for disrupting network activities. Hence, there is a need to frequently monitor the risk levels of critical network infrastructure. Towards realizing this objective, I describe a network level risk management mechanism that prioritizes resources in a VoIP network. The prioritization scheme involves an adaptive re-computation model of risk levels using attack graphs and Bayesian inference techniques. All the above techniques collectively account for a domain-level VoIP security solution.
- A CAM-based, high-performance classifier-scheduler for a video network processor.
- Classification and scheduling are key functionalities of a network processor. Network processors are equipped with application specific integrated circuits (ASIC), so that as IP (Internet Protocol) packets arrive, they can be processed directly without using the central processing unit. A new network processor is proposed called the video network processor (VNP) for real time broadcasting of video streams for IP television (IPTV). This thesis explores the challenge in designing a combined classification and scheduling module for a VNP. I propose and design the classifier-scheduler module which will classify and schedule data for VNP. The proposed module discriminates between IP packets and video packets. The video packets are further processed for digital rights management (DRM). IP packets which carry regular traffic will traverse without any modification. Basic architecture of VNP and architecture of classifier-scheduler module based on content addressable memory (CAM) and random access memory (RAM) has been proposed. The module has been designed and simulated in Xilinx 9.1i; is built in ISE simulator with a throughput of 1.79 Mbps and a maximum working frequency of 111.89 MHz at a power dissipation of 33.6mW. The code has been translated and mapped for Spartan and Virtex family of devices.
- Exploring Trusted Platform Module Capabilities: A Theoretical and Experimental Study
- Trusted platform modules (TPMs) are hardware modules that are bound to a computer's motherboard, that are being included in many desktops and laptops. Augmenting computers with these hardware modules adds powerful functionality in distributed settings, allowing us to reason about the security of these systems in new ways. In this dissertation, I study the functionality of TPMs from a theoretical as well as an experimental perspective. On the theoretical front, I leverage various features of TPMs to construct applications like random oracles that are impossible to implement in a standard model of computation. Apart from random oracles, I construct a new cryptographic primitive which is basically a non-interactive form of the standard cryptographic primitive of oblivious transfer. I apply this new primitive to secure mobile agent computations, where interaction between various entities is typically required to ensure security. I prove these constructions are secure using standard cryptographic techniques and assumptions. To test the practicability of these constructions and their applications, I performed an experimental study, both on an actual TPM and a software TPM simulator which has been enhanced to make it reflect timings from a real TPM. This allowed me to benchmark the performance of the applications and test the feasibility of the proposed extensions to standard TPMs. My tests also show that these constructions are practical.
- General Nathan Twining and the Fifteenth Air Force in World War II
- General Nathan F. Twining distinguished himself in leading the American Fifteenth Air Force during the last full year of World War II in the European Theatre. Drawing on the leadership qualities he had already shown in combat in the Pacific Theatre, he was the only USAAF leader who commanded three separate air forces during World War II. His command of the Fifteenth Air Force gave him his biggest, longest lasting, and most challenging experience of the war, which would be the foundation for the reputation that eventually would win him appointment to the nation's highest military post as Chairman of the Joint Chiefs of Staff during the Cold War.
- General Purpose Programming on Modern Graphics Hardware
- I start with a brief introduction to the graphics processing unit (GPU) as well as general-purpose computation on modern graphics hardware (GPGPU). Next, I explore the motivations for GPGPU programming, and the capabilities of modern GPUs (including advantages and disadvantages). Also, I give the background required for further exploring GPU programming, including the terminology used and the resources available. Finally, I include a comprehensive survey of previous and current GPGPU work, and end with a look at the future of GPU programming.
- Keywords in the mist: Automated keyword extraction for very large documents and back of the book indexing.
- This research addresses the problem of automatic keyphrase extraction from large documents and back of the book indexing. The potential benefits of automating this process are far reaching, from improving information retrieval in digital libraries, to saving countless man-hours by helping professional indexers creating back of the book indexes. The dissertation introduces a new methodology to evaluate automated systems, which allows for a detailed, comparative analysis of several techniques for keyphrase extraction. We introduce and evaluate both supervised and unsupervised techniques, designed to balance the resource requirements of an automated system and the best achievable performance. Additionally, a number of novel features are proposed, including a statistical informativeness measure based on chi statistics; an encyclopedic feature that taps into the vast knowledge base of Wikipedia to establish the likelihood of a phrase referring to an informative concept; and a linguistic feature based on sophisticated semantic analysis of the text using current theories of discourse comprehension. The resulting keyphrase extraction system is shown to outperform the current state of the art in supervised keyphrase extraction by a large margin. Moreover, a fully automated back of the book indexing system based on the keyphrase extraction system was shown to lead to back of the book indexes closely resembling those created by human experts.
- Models to Combat Email Spam Botnets and Unwanted Phone Calls
- With the amount of email spam received these days it is hard to imagine that spammers act individually. Nowadays, most of the spam emails have been sent from a collection of compromised machines controlled by some spammers. These compromised computers are often called bots, using which the spammers can send massive volume of spam within a short period of time. The motivation of this work is to understand and analyze the behavior of spammers through a large collection of spam mails. My research examined a the data set collected over a 2.5-year period and developed an algorithm which would give the botnet features and then classify them into various groups. Principal component analysis was used to study the association patterns of group of spammers and the individual behavior of a spammer in a given domain. This is based on the features which capture maximum variance of information we have clustered. Presence information is a growing tool towards more efficient communication and providing new services and features within a business setting and much more. The main contribution in my thesis is to propose the willingness estimator that can estimate the callee's willingness without his/her involvement, the model estimates willingness level based on call history. Finally, the accuracy of the proposed willingness estimator is validated with the actual call logs.
- Non-Uniform Grid-Based Coordinated Routing in Wireless Sensor Networks
- Wireless sensor networks are ad hoc networks of tiny battery powered sensor nodes that can organize themselves to form self-organized networks and collect information regarding temperature, light, and pressure in an area. Though the applications of sensor networks are very promising, sensor nodes are limited in their capability due to many factors. The main limitation of these battery powered nodes is energy. Sensor networks are expected to work for long periods of time once deployed and it becomes important to conserve the battery life of the nodes to extend network lifetime. This work examines non-uniform grid-based routing protocol as an effort to minimize energy consumption in the network and extend network lifetime. The entire test area is divided into non-uniformly shaped grids. Fixed source and sink nodes with unlimited energy are placed in the network. Sensor nodes with full battery life are deployed uniformly and randomly in the field. The source node floods the network with only the coordinator node active in each grid and the other nodes sleeping. The sink node traces the same route back to the source node through the same coordinators. This process continues till a coordinator node runs out of energy, when new coordinator nodes are elected to participate in routing. Thus the network stays alive till the link between the source and sink nodes is lost, i.e., the network is partitioned. This work explores the efficiency of the non-uniform grid-based routing protocol for different node densities and the non-uniform grid structure that best extends network lifetime.
- Direct Online/Offline Digital Signature Schemes.
- Online/offline signature schemes are useful in many situations, and two such scenarios are considered in this dissertation: bursty server authentication and embedded device authentication. In this dissertation, new techniques for online/offline signing are introduced, those are applied in a variety of ways for creating online/offline signature schemes, and five different online/offline signature schemes that are proved secure under a variety of models and assumptions are proposed. Two of the proposed five schemes have the best offline or best online performance of any currently known technique, and are particularly well-suited for the scenarios that are considered in this dissertation. To determine if the proposed schemes provide the expected practical improvements, a series of experiments were conducted comparing the proposed schemes with each other and with other state-of-the-art schemes in this area, both on a desktop class computer, and under AVR Studio, a simulation platform for an 8-bit processor that is popular for embedded systems. Under AVR Studio, the proposed SGE scheme using a typical key size for the embedded device authentication scenario, can complete the offline phase in about 24 seconds and then produce a signature (the online phase) in 15 milliseconds, which is the best offline performance of any known signature scheme that has been proven secure in the standard model. In the tests on a desktop class computer, the proposed SGS scheme, which has the best online performance and is designed for the bursty server authentication scenario, generated 469,109 signatures per second, and the Schnorr scheme (the next best scheme in terms of online performance) generated only 223,548 signatures. The experimental results demonstrate that the SGE and SGS schemes are the most efficient techniques for embedded device authentication and bursty server authentication, respectively.
- Graph-based Centrality Algorithms for Unsupervised Word Sense Disambiguation
- This thesis introduces an innovative methodology of combining some traditional dictionary based approaches to word sense disambiguation (semantic similarity measures and overlap of word glosses, both based on WordNet) with some graph-based centrality methods, namely the degree of the vertices, Pagerank, closeness, and betweenness. The approach is completely unsupervised, and is based on creating graphs for the words to be disambiguated. We experiment with several possible combinations of the semantic similarity measures as the first stage in our experiments. The next stage attempts to score individual vertices in the graphs previously created based on several graph connectivity measures. During the final stage, several voting schemes are applied on the results obtained from the different centrality algorithms. The most important contributions of this work are not only that it is a novel approach and it works well, but also that it has great potential in overcoming the new-knowledge-acquisition bottleneck which has apparently brought research in supervised WSD as an explicit application to a plateau. The type of research reported in this thesis, which does not require manually annotated data, holds promise of a lot of new and interesting things, and our work is one of the first steps, despite being a small one, in this direction. The complete system is built and tested on standard benchmarks, and is comparable with work done on graph-based word sense disambiguation as well as lexical chains. The evaluation indicates that the right combination of the above mentioned metrics can be used to develop an unsupervised disambiguation engine as powerful as the state-of-the-art in WSD.
- Region aware DCT domain invisible robust blind watermarking for color images.
- The multimedia revolution has made a strong impact on our society. The explosive growth of the Internet, the access to this digital information generates new opportunities and challenges. The ease of editing and duplication in digital domain created the concern of copyright protection for content providers. Various schemes to embed secondary data in the digital media are investigated to preserve copyright and to discourage unauthorized duplication: where digital watermarking is a viable solution. This thesis proposes a novel invisible watermarking scheme: a discrete cosine transform (DCT) domain based watermark embedding and blind extraction algorithm for copyright protection of the color images. Testing of the proposed watermarking scheme's robustness and security via different benchmarks proves its resilience to digital attacks. The detectors response, PSNR and RMSE results show that our algorithm has a better security performance than most of the existing algorithms.
- Cross Language Information Retrieval for Languages with Scarce Resources
- Our generation has experienced one of the most dramatic changes in how society communicates. Today, we have online information on almost any imaginable topic. However, most of this information is available in only a few dozen languages. In this thesis, I explore the use of parallel texts to enable cross-language information retrieval (CLIR) for languages with scarce resources. To build the parallel text I use the Bible. I evaluate different variables and their impact on the resulting CLIR system, specifically: (1) the CLIR results when using different amounts of parallel text; (2) the role of paraphrasing on the quality of the CLIR output; (3) the impact on accuracy when translating the query versus translating the collection of documents; and finally (4) how the results are affected by the use of different dialects. The results show that all these variables have a direct impact on the quality of the CLIR system.
- Development, Implementation, and Analysis of a Contact Model for an Infectious Disease
- With a growing concern of an infectious diseases spreading in a population, epidemiology is becoming more important for the future of public health. In the past epidemiologist used existing data of an outbreak to help them determine how an infectious disease might spread in the future. Now with computational models, they able to analysis data produced by these models to help with prevention and intervention plans. This paper looks at the design, implementation, and analysis of a computational model based on the interactions of the population between individuals. The design of the working contact model looks closely at the SEIR model used as the foundation and the two timelines of a disease. The implementation of the contact model is reviewed while looking closely at data structures. The analysis of the experiments provide evidence this contact model can be used to help epidemiologist study the spread of an infectious disease based on the contact rate of individuals.
- Variability-aware low-power techniques for nanoscale mixed-signal circuits.
- New circuit design techniques that accommodate lower supply voltages necessary for portable systems need to be integrated into the semiconductor intellectual property (IP) core. Systems that once worked at 3.3 V or 2.5 V now need to work at 1.8 V or lower, without causing any performance degradation. Also, the fluctuation of device characteristics caused by process variation in nanometer technologies is seen as design yield loss. The numerous parasitic effects induced by layouts, especially for high-performance and high-speed circuits, pose a problem for IC design. Lack of exact layout information during circuit sizing leads to long design iterations involving time-consuming runs of complex tools. There is a strong need for low-power, high-performance, parasitic-aware and process-variation-tolerant circuit design. This dissertation proposes methodologies and techniques to achieve variability, power, performance, and parasitic-aware circuit designs. Three approaches are proposed: the single iteration automatic approach, the hybrid Monte Carlo and design of experiments (DOE) approach, and the corner-based approach. Widely used mixed-signal circuits such as analog-to-digital converter (ADC), voltage controlled oscillator (VCO), voltage level converter and active pixel sensor (APS) have been designed at nanoscale complementary metal oxide semiconductor (CMOS) and subjected to the proposed methodologies. The effectiveness of the proposed methodologies has been demonstrated through exhaustive simulations. Apart from these methodologies, the application of dual-oxide and dual-threshold techniques at circuit level in order to minimize power and leakage is also explored.
- Computational Epidemiology - Analyzing Exposure Risk: A Deterministic, Agent-Based Approach
- Many infectious diseases are spread through interactions between susceptible and infectious individuals. Keeping track of where each exposure to the disease took place, when it took place, and which individuals were involved in the exposure can give public health officials important information that they may use to formulate their interventions. Further, knowing which individuals in the population are at the highest risk of becoming infected with the disease may prove to be a useful tool for public health officials trying to curtail the spread of the disease. Epidemiological models are needed to allow epidemiologists to study the population dynamics of transmission of infectious agents and the potential impact of infectious disease control programs. While many agent-based computational epidemiological models exist in the literature, they focus on the spread of disease rather than exposure risk. These models are designed to simulate very large populations, representing individuals as agents, and using random experiments and probabilities in an attempt to more realistically guide the course of the modeled disease outbreak. The work presented in this thesis focuses on tracking exposure risk to chickenpox in an elementary school setting. This setting is chosen due to the high level of detailed information realistically available to school administrators regarding individuals' schedules and movements. Using an agent-based approach, contacts between individuals are tracked and analyzed with respect to both individuals and locations. The results are then analyzed using a combination of tools from computer science and geographic information science.
- End of Insertion Detection in Colonoscopy Videos
- Colorectal cancer is the second leading cause of cancer-related deaths behind lung cancer in the United States. Colonoscopy is the preferred screening method for detection of diseases like Colorectal Cancer. In the year 2006, American Society for Gastrointestinal Endoscopy (ASGE) and American College of Gastroenterology (ACG) issued guidelines for quality colonoscopy. The guidelines suggest that on average the withdrawal phase during a screening colonoscopy should last a minimum of 6 minutes. My aim is to classify the colonoscopy video into insertion and withdrawal phase. The problem is that currently existing shot detection techniques cannot be applied because colonoscopy is a single camera shot from start to end. An algorithm to detect phase boundary has already been developed by the MIGLAB team. Existing method has acceptable levels of accuracy but the main issue is dependency on MPEG (Moving Pictures Expert Group) 1/2. I implemented exhaustive search for motion estimation to reduce the execution time and improve the accuracy. I took advantages of the C/C++ programming languages with multithreading which helped us get even better performances in terms of execution time. I propose a method for improving the current method of colonoscopy video analysis and also an extension for the same to make it usable for real time videos. The real time version we implemented is capable of handling streams coming directly from the camera in the form of uncompressed bitmap frames. Existing implementation could not be applied to real time scenario because of its dependency on MPEG 1/2. Future direction of this research includes improved motion search and GPU parallel computing techniques.
- FPGA Implementation of Low Density Party Check Codes Decoder
- Reliable communication over the noisy channel has become one of the major concerns in the field of digital wireless communications. The low density parity check codes (LDPC) has gained lot of attention recently because of their excellent error-correcting capacity. It was first proposed by Robert G. Gallager in 1960. LDPC codes belong to the class of linear block codes. Near capacity performance is achievable on a large collection of data transmission and storage.In my thesis I have focused on hardware implementation of (3, 6) - regular LDPC codes. A fully parallel decoder will require too high complexity of hardware realization. Partly parallel decoder has the advantage of effective compromise between decoding throughput and high hardware complexity. The decoding of the codeword follows the belief propagation alias probability propagation algorithm in log domain. A 9216 bit, (3, 6) regular LDPC code with code rate ½ was implemented on FPGA targeting Xilinx Virtex 4 XC4VLX80 device with package FF1148. This decoder achieves a maximum throughput of 82 Mbps. The entire model was designed in VHDL in the Xilinx ISE 9.2 environment.