You limited your search to:
- VLSI Architecture and FPGA Prototyping of a Secure Digital Camera for Biometric Application
- This thesis presents a secure digital camera (SDC) that inserts biometric data into images found in forms of identification such as the newly proposed electronic passport. However, putting biometric data in passports makes the data vulnerable for theft, causing privacy related issues. An effective solution to combating unauthorized access such as skimming (obtaining data from the passport's owner who did not willingly submit the data) or eavesdropping (intercepting information as it moves from the chip to the reader) could be judicious use of watermarking and encryption at the source end of the biometric process in hardware like digital camera or scanners etc. To address such issues, a novel approach and its architecture in the framework of a digital camera, conceptualized as an SDC is presented. The SDC inserts biometric data into passport image with the aid of watermarking and encryption processes. The VLSI (very large scale integration) architecture of the functional units of the SDC such as watermarking and encryption unit is presented. The result of the hardware implementation of Rijndael advanced encryption standard (AES) and a discrete cosine transform (DCT) based visible and invisible watermarking algorithm is presented. The prototype chip can carry out simultaneous encryption and watermarking, which to our knowledge is the first of its kind. The encryption unit has a throughput of 500 Mbit/s and the visible and invisible watermarking unit has a max frequency of 96.31 MHz and 256 MHz respectively.
- Comparison and Evaluation of Existing Analog Circuit Simulator using Sigma-Delta Modulator
Access: Use of this item is restricted to the UNT Community.
In the world of VLSI (very large scale integration) technology, there are many different types of circuit simulators that are used to design and predict the circuit behavior before actual fabrication of the circuit. In this thesis, I compared and evaluated existing circuit simulators by considering standard benchmark circuits. The circuit simulators which I evaluated and explored are Ngspice, Tclspice, Winspice (open source) and Spectre® (commercial). I also tested standard benchmarks using these circuit simulators and compared their outputs. The simulators are evaluated using design metrics in order to quantify their performance and identify efficient circuit simulators. In addition, I designed a sigma-delta modulator and its individual components using the analog behavioral language Verilog-A. Initially, I performed simulations of individual components of the sigma-delta modulator and later of the whole system. Finally, CMOS (complementary metal-oxide semiconductor) transistor-level circuits were designed for the differential amplifier, operational amplifier and comparator of the modulator.
- Resource Efficient and Scalable Routing using Intelligent Mobile Agents
- Many of the contemporary routing algorithms use simple mechanisms such as flooding or broadcasting to disseminate the routing information available to them. Such routing algorithms cause significant network resource overhead due to the large number of messages generated at each host/router throughout the route update process. Many of these messages are wasteful since they do not contribute to the route discovery process. Reducing the resource overhead may allow for several algorithms to be deployed in a wide range of networks (wireless and ad-hoc) which require a simple routing protocol due to limited availability of resources (memory and bandwidth). Motivated by the need to reduce the resource overhead associated with routing algorithms a new implementation of distance vector routing algorithm using an agent-based paradigm known as Agent-based Distance Vector Routing (ADVR) has been proposed. In ADVR, the ability of route discovery and message passing shifts from the nodes to individual agents that traverse the network, co-ordinate with each other and successively update the routing tables of the nodes they visit.
- Resource Management in Wireless Networks
- A local call admission control (CAC) algorithm for third generation wireless networks was designed and implemented, which allows for the simulation of network throughput for different spreading factors and various mobility scenarios. A global CAC algorithm is also implemented and used as a benchmark since it is inherently optimized; it yields the best possible performance but has an intensive computational complexity. Optimized local CAC algorithm achieves similar performance as global CAC algorithm at a fraction of the computational cost. Design of a dynamic channel assignment algorithm for IEEE 802.11 wireless systems is also presented. Channels are assigned dynamically depending on the minimal interference generated by the neighboring access points on a reference access point. Analysis of dynamic channel assignment algorithm shows an improvement by a factor of 4 over the default settings of having all access points use the same channel, resulting significantly higher network throughput.
- The Role of Intelligent Mobile Agents in Network Management and Routing
- In this research, the application of intelligent mobile agents to the management of distributed network environments is investigated. Intelligent mobile agents are programs which can move about network systems in a deterministic manner in carrying their execution state. These agents can be considered an application of distributed artificial intelligence where the (usually small) agent code is moved to the data and executed locally. The mobile agent paradigm offers potential advantages over many conventional mechanisms which move (often large) data to the code, thereby wasting available network bandwidth. The performance of agents in network routing and knowledge acquisition has been investigated and simulated. A working mobile agent system has also been designed and implemented in JDK 1.2.
- A New N-way Reconfigurable Data Cache Architecture for Embedded Systems
Access: Use of this item is restricted to the UNT Community.
Performance and power consumption are most important issues while designing embedded systems. Several studies have shown that cache memory consumes about 50% of the total power in these systems. Thus, the architecture of the cache governs both performance and power usage of embedded systems. A new N-way reconfigurable data cache is proposed especially for embedded systems. This thesis explores the issues and design considerations involved in designing a reconfigurable cache. The proposed reconfigurable data cache architecture can be configured as direct-mapped, two-way, or four-way set associative using a mode selector. The module has been designed and simulated in Xilinx ISE 9.1i and ModelSim SE 6.3e using the Verilog hardware description language.
- Using Reinforcement Learning in Partial Order Plan Space
Access: Use of this item is restricted to the UNT Community.
Partial order planning is an important approach that solves planning problems without completely specifying the orderings between the actions in the plan. This property provides greater flexibility in executing plans; hence making the partial order planners a preferred choice over other planning methodologies. However, in order to find partially ordered plans, partial order planners perform a search in plan space rather than in space of world states and an uninformed search in plan space leads to poor efficiency. In this thesis, I discuss applying a reinforcement learning method, called First-visit Monte Carlo method, to partial order planning in order to design agents which do not need any training data or heuristics but are still able to make informed decisions in plan space based on experience. Communicating effectively with the agent is crucial in reinforcement learning. I address how this task was accomplished in plan space and the results from an evaluation of a blocks world test bed.
- Natural Language Interfaces to Databases
- Natural language interfaces to databases (NLIDB) are systems that aim to bridge the gap between the languages used by humans and computers, and automatically translate natural language sentences to database queries. This thesis proposes a novel approach to NLIDB, using graph-based models. The system starts by collecting as much information as possible from existing databases and sentences, and transforms this information into a knowledge base for the system. Given a new question, the system will use this knowledge to analyze and translate the sentence into its corresponding database query statement. The graph-based NLIDB system uses English as the natural language, a relational database model, and SQL as the formal query language. In experiments performed with natural language questions ran against a large database containing information about U.S. geography, the system showed good performance compared to the state-of-the-art in the field.
- An Approach Towards Self-Supervised Classification Using Cyc
- Due to the long duration required to perform manual knowledge entry by human knowledge engineers it is desirable to find methods to automatically acquire knowledge about the world by accessing online information. In this work I examine using the Cyc ontology to guide the creation of Naïve Bayes classifiers to provide knowledge about items described in Wikipedia articles. Given an initial set of Wikipedia articles the system uses the ontology to create positive and negative training sets for the classifiers in each category. The order in which classifiers are generated and used to test articles is also guided by the ontology. The research conducted shows that a system can be created that utilizes statistical text classification methods to extract information from an ad-hoc generated information source like Wikipedia for use in a formal semantic ontology like Cyc. Benefits and limitations of the system are discussed along with future work.
- Performance Analysis of Wireless Networks with QoS Adaptations
- The explosive demand for multimedia and fast transmission of continuous media on wireless networks means the simultaneous existence of traffic requiring different qualities of service (QoS). In this thesis, several efficient algorithms have been developed which offer several QoS to the end-user. We first look at a request TDMA/CDMA protocol for supporting wireless multimedia traffic, where CDMA is laid over TDMA. Then we look at a hybrid push-pull algorithm for wireless networks, and present a generalized performance analysis of the proposed protocol. Some of the QoS factors considered include customer retrial rates due to user impatience and system timeouts and different levels of priority and weights for mobile hosts. We have also looked at how customer impatience and system timeouts affect the QoS provided by several queuing and scheduling schemes such as FIFO, priority, weighted fair queuing, and the application of the stretch-optimal algorithm to scheduling.
- Survey of Approximation Algorithms for Set Cover Problem
- In this thesis, I survey 11 approximation algorithms for unweighted set cover problem. I have also implemented the three algorithms and created a software library that stores the code I have written. The algorithms I survey are: 1. Johnson's standard greedy; 2. f-frequency greedy; 3. Goldsmidt, Hochbaum and Yu's modified greedy; 4. Halldorsson's local optimization; 5. Dur and Furer semi local optimization; 6. Asaf Levin's improvement to Dur and Furer; 7. Simple rounding; 8. Randomized rounding; 9. LP duality; 10. Primal-dual schema; and 11. Network flow technique. Most of the algorithms surveyed are refinements of standard greedy algorithm.
- A Minimally Supervised Word Sense Disambiguation Algorithm Using Syntactic Dependencies and Semantic Generalizations
- Natural language is inherently ambiguous. For example, the word "bank" can mean a financial institution or a river shore. Finding the correct meaning of a word in a particular context is a task known as word sense disambiguation (WSD), which is essential for many natural language processing applications such as machine translation, information retrieval, and others. While most current WSD methods try to disambiguate a small number of words for which enough annotated examples are available, the method proposed in this thesis attempts to address all words in unrestricted text. The method is based on constraints imposed by syntactic dependencies and concept generalizations drawn from an external dictionary. The method was tested on standard benchmarks as used during the SENSEVAL-2 and SENSEVAL-3 WSD international evaluation exercises, and was found to be competitive.
- General Purpose Programming on Modern Graphics Hardware
- I start with a brief introduction to the graphics processing unit (GPU) as well as general-purpose computation on modern graphics hardware (GPGPU). Next, I explore the motivations for GPGPU programming, and the capabilities of modern GPUs (including advantages and disadvantages). Also, I give the background required for further exploring GPU programming, including the terminology used and the resources available. Finally, I include a comprehensive survey of previous and current GPGPU work, and end with a look at the future of GPU programming.
- Force-Directed Graph Drawing and Aesthetics Measurement in a Non-Strict Pure Functional Programming Language
- Non-strict pure functional programming often requires redesigning algorithms and data structures to work more effectively under new constraints of non-strict evaluation and immutable state. Graph drawing algorithms, while numerous and broadly studied, have no presence in the non-strict pure functional programming model. Additionally, there is currently no freely licensed standalone toolkit used to quantitatively analyze aesthetics of graph drawings. This thesis addresses two previously unexplored questions. Can a force-directed graph drawing algorithm be implemented in a non-strict functional language, such as Haskell, and still be practically usable? Can an easily extensible aesthetic measuring tool be implemented in a language such as Haskell and still be practically usable? The focus of the thesis is on implementing one of the simplest force-directed algorithms, that of Fruchterman and Reingold, and comparing its resulting aesthetics to those of a well-known C++ implementation of the same algorithm.
- Logic Programming Tools for Dynamic Content Generation and Internet Data Mining
Access: Use of this item is restricted to the UNT Community.
The phenomenal growth of Information Technology requires us to elicit, store and maintain huge volumes of data. Analyzing this data for various purposes is becoming increasingly important. Data mining consists of applying data analysis and discovery algorithms that under acceptable computational efficiency limitations, produce a particular enumeration of patterns over the data. We present two techniques based on using Logic programming tools for data mining. Data mining analyzes data by extracting patterns which describe its structure and discovers co-relations in the form of rules. We distinguish analysis methods as visual and non-visual and present one application of each. We explain that our focus on the field of Logic Programming makes some of the very complex tasks related to Web based data mining and dynamic content generation, simple and easy to implement in a uniform framework.
- FPGA Implementations of Elliptic Curve Cryptography and Tate Pairing over Binary Field
- Elliptic curve cryptography (ECC) is an alternative to traditional techniques for public key cryptography. It offers smaller key size without sacrificing security level. Tate pairing is a bilinear map used in identity based cryptography schemes. In a typical elliptic curve cryptosystem, elliptic curve point multiplication is the most computationally expensive component. Similarly, Tate pairing is also quite computationally expensive. Therefore, it is more attractive to implement the ECC and Tate pairing using hardware than using software. The bases of both ECC and Tate pairing are Galois field arithmetic units. In this thesis, I propose the FPGA implementations of the elliptic curve point multiplication in GF (2283) as well as Tate pairing computation on supersingular elliptic curve in GF (2283). I have designed and synthesized the elliptic curve point multiplication and Tate pairing module using Xilinx's FPGA, as well as synthesized all the Galois arithmetic units used in the designs. Experimental results demonstrate that the FPGA implementation can speedup the elliptic curve point multiplication by 31.6 times compared to software based implementation. The results also demonstrate that the FPGA implementation can speedup the Tate pairing computation by 152 times compared to software based implementation.
- An Empirical Evaluation of Communication and Coordination Effectiveness in Autonomous Reactive Multiagent Systems
- This thesis describes experiments designed to measure the effect of collaborative communication on task performance of a multiagent system. A discrete event simulation was developed to model a multi-agent system completing a task to find and collect food resources, with the ability to substitute various communication and coordination methods. Experiments were conducted to find the effects of the various communication methods on completion of the task to find and harvest the food resources. Results show that communication decreases the time required to complete the task. However, all communication methods do not fare equally well. In particular, results indicate that the communication model of the bee is a particularly effective method of agent communication and collaboration. Furthermore, results indicate that direct communication with additional information content provides better completion results. Cost-benefit models show some conflicting information, indicating that the increased performance may not offset the additional cost of achieving that performance.
- Models to Combat Email Spam Botnets and Unwanted Phone Calls
- With the amount of email spam received these days it is hard to imagine that spammers act individually. Nowadays, most of the spam emails have been sent from a collection of compromised machines controlled by some spammers. These compromised computers are often called bots, using which the spammers can send massive volume of spam within a short period of time. The motivation of this work is to understand and analyze the behavior of spammers through a large collection of spam mails. My research examined a the data set collected over a 2.5-year period and developed an algorithm which would give the botnet features and then classify them into various groups. Principal component analysis was used to study the association patterns of group of spammers and the individual behavior of a spammer in a given domain. This is based on the features which capture maximum variance of information we have clustered. Presence information is a growing tool towards more efficient communication and providing new services and features within a business setting and much more. The main contribution in my thesis is to propose the willingness estimator that can estimate the callee's willingness without his/her involvement, the model estimates willingness level based on call history. Finally, the accuracy of the proposed willingness estimator is validated with the actual call logs.
- General Nathan Twining and the Fifteenth Air Force in World War II
- General Nathan F. Twining distinguished himself in leading the American Fifteenth Air Force during the last full year of World War II in the European Theatre. Drawing on the leadership qualities he had already shown in combat in the Pacific Theatre, he was the only USAAF leader who commanded three separate air forces during World War II. His command of the Fifteenth Air Force gave him his biggest, longest lasting, and most challenging experience of the war, which would be the foundation for the reputation that eventually would win him appointment to the nation's highest military post as Chairman of the Joint Chiefs of Staff during the Cold War.
- Non-Uniform Grid-Based Coordinated Routing in Wireless Sensor Networks
- Wireless sensor networks are ad hoc networks of tiny battery powered sensor nodes that can organize themselves to form self-organized networks and collect information regarding temperature, light, and pressure in an area. Though the applications of sensor networks are very promising, sensor nodes are limited in their capability due to many factors. The main limitation of these battery powered nodes is energy. Sensor networks are expected to work for long periods of time once deployed and it becomes important to conserve the battery life of the nodes to extend network lifetime. This work examines non-uniform grid-based routing protocol as an effort to minimize energy consumption in the network and extend network lifetime. The entire test area is divided into non-uniformly shaped grids. Fixed source and sink nodes with unlimited energy are placed in the network. Sensor nodes with full battery life are deployed uniformly and randomly in the field. The source node floods the network with only the coordinator node active in each grid and the other nodes sleeping. The sink node traces the same route back to the source node through the same coordinators. This process continues till a coordinator node runs out of energy, when new coordinator nodes are elected to participate in routing. Thus the network stays alive till the link between the source and sink nodes is lost, i.e., the network is partitioned. This work explores the efficiency of the non-uniform grid-based routing protocol for different node densities and the non-uniform grid structure that best extends network lifetime.
- Planning techniques for agent based 3D animations.
- The design of autonomous agents capable of performing a given goal in a 3D domain continues to be a challenge for computer animated story generation systems. We present a novel prototype which consists of a 3D engine and a planner for a simple virtual world. We incorporate the 2D planner into the 3D engine to provide 3D animations. Based on the plan, the 3D world is created and the objects are positioned. Then the plan is linearized into simpler actions for object animation and rendered via the 3D engine. We use JINNI3D as the engine and WARPLAN-C as the planner for the above-mentioned prototype. The user can interact with the system using a simple natural language interface. The interface consists of a shallow parser, which is capable of identifying a set of predefined basic commands. The command given by the user is considered as the goal for the planner. The resulting plan is created and rendered in 3D. The overall system is comparable to a character based interactive story generation system except that it is limited to the predefined 3D environment.
- Comparative Study of RSS-Based Collaborative Localization Methods in Wireless Sensor Networks
- In this thesis two collaborative localization techniques are studied: multidimensional scaling (MDS) and maximum likelihood estimator (MLE). A synthesis of a new location estimation method through a serial integration of these two techniques, such that an estimate is first obtained using MDS and then MLE is employed to fine-tune the MDS solution, was the subject of this research using various simulation and experimental studies. In the simulations, important issues including the effects of sensor node density, reference node density and different deployment strategies of reference nodes were addressed. In the experimental study, the path loss model of indoor environments is developed by determining the environment-specific parameters from the experimental measurement data. Then, the empirical path loss model is employed in the analysis and simulation study of the performance of collaborative localization techniques.
- Towards Communicating Simple Sentence using Pictorial Representations
- Language can sometimes be an impediment in communication. Whether we are talking about people who speak different languages, students who are learning a new language, or people with language disorders, the understanding of linguistic representations in a given language requires a certain amount of knowledge that not everybody has. In this thesis, we propose "translation through pictures" as a means for conveying simple pieces of information across language barriers, and describe a system that can automatically generate pictorial representations for simple sentences. Comparative experiments conducted on visual and linguistic representations of information show that a considerable amount of understanding can be achieved through pictorial descriptions, with results within a comparable range of those obtained with current machine translation techniques. Moreover, a user study conducted around the pictorial translation system reveals that users found the system to generally produce correct word/image associations, and rate the system as interactive and intelligent.
- A Language and Visual Interface to Specify Complex Spatial Pattern Mining
Access: Use of this item is restricted to the UNT Community.
The emerging interests in spatial pattern mining leads to the demand for a flexible spatial pattern mining language, on which easy to use and understand visual pattern language could be built. It is worthwhile to define a pattern mining language called LCSPM to allow users to specify complex spatial patterns. I describe a proposed pattern mining language in this paper. A visual interface which allows users to specify the patterns visually is developed. Visual pattern queries are translated into the LCSPM language by a parser and data mining process can be triggered afterwards. The visual language is based on and goes beyond the visual language proposed in literature. I implemented a prototype system based on the open source JUMP framework.
- Cross Language Information Retrieval for Languages with Scarce Resources
- Our generation has experienced one of the most dramatic changes in how society communicates. Today, we have online information on almost any imaginable topic. However, most of this information is available in only a few dozen languages. In this thesis, I explore the use of parallel texts to enable cross-language information retrieval (CLIR) for languages with scarce resources. To build the parallel text I use the Bible. I evaluate different variables and their impact on the resulting CLIR system, specifically: (1) the CLIR results when using different amounts of parallel text; (2) the role of paraphrasing on the quality of the CLIR output; (3) the impact on accuracy when translating the query versus translating the collection of documents; and finally (4) how the results are affected by the use of different dialects. The results show that all these variables have a direct impact on the quality of the CLIR system.
- End of Insertion Detection in Colonoscopy Videos
- Colorectal cancer is the second leading cause of cancer-related deaths behind lung cancer in the United States. Colonoscopy is the preferred screening method for detection of diseases like Colorectal Cancer. In the year 2006, American Society for Gastrointestinal Endoscopy (ASGE) and American College of Gastroenterology (ACG) issued guidelines for quality colonoscopy. The guidelines suggest that on average the withdrawal phase during a screening colonoscopy should last a minimum of 6 minutes. My aim is to classify the colonoscopy video into insertion and withdrawal phase. The problem is that currently existing shot detection techniques cannot be applied because colonoscopy is a single camera shot from start to end. An algorithm to detect phase boundary has already been developed by the MIGLAB team. Existing method has acceptable levels of accuracy but the main issue is dependency on MPEG (Moving Pictures Expert Group) 1/2. I implemented exhaustive search for motion estimation to reduce the execution time and improve the accuracy. I took advantages of the C/C++ programming languages with multithreading which helped us get even better performances in terms of execution time. I propose a method for improving the current method of colonoscopy video analysis and also an extension for the same to make it usable for real time videos. The real time version we implemented is capable of handling streams coming directly from the camera in the form of uncompressed bitmap frames. Existing implementation could not be applied to real time scenario because of its dependency on MPEG 1/2. Future direction of this research includes improved motion search and GPU parallel computing techniques.
- Automated Syndromic Surveillance using Intelligent Mobile Agents
- Current syndromic surveillance systems utilize centralized databases that are neither scalable in storage space nor in computing power. Such systems are limited in the amount of syndromic data that may be collected and analyzed for the early detection of infectious disease outbreaks. However, with the increased prevalence of international travel, public health monitoring must extend beyond the borders of municipalities or states which will require the ability to store vasts amount of data and significant computing power for analyzing the data. Intelligent mobile agents may be used to create a distributed surveillance system that will utilize the hard drives and computer processing unit (CPU) power of the hosts on the agent network where the syndromic information is located. This thesis proposes the design of a mobile agent-based syndromic surveillance system and an agent decision model for outbreak detection. Simulation results indicate that mobile agents are capable of detecting an outbreak that occurs at all hosts the agent is monitoring. Further study of agent decision models is required to account for localized epidemics and variable agent movement rates.
- The enhancement of machine translation for low-density languages using Web-gathered parallel texts.
- The majority of the world's languages are poorly represented in informational media like radio, television, newspapers, and the Internet. Translation into and out of these languages may offer a way for speakers of these languages to interact with the wider world, but current statistical machine translation models are only effective with a large corpus of parallel texts - texts in two languages that are translations of one another - which most languages lack. This thesis describes the Babylon project which attempts to alleviate this shortage by supplementing existing parallel texts with texts gathered automatically from the Web -- specifically targeting pages that contain text in a pair of languages. Results indicate that parallel texts gathered from the Web can be effectively used as a source of training data for machine translation and can significantly improve the translation quality for text in a similar domain. However, the small quantity of high-quality low-density language parallel texts on the Web remains a significant obstacle.
- A Dual Dielectric Approach for Performance Aware Reduction of Gate Leakage in Combinational Circuits
- Design of systems in the low-end nanometer domain has introduced new dimensions in power consumption and dissipation in CMOS devices. With continued and aggressive scaling, using low thickness SiO2 for the transistor gates, gate leakage due to gate oxide direct tunneling current has emerged as the major component of leakage in the CMOS circuits. Therefore, providing a solution to the issue of gate oxide leakage has become one of the key concerns in achieving low power and high performance CMOS VLSI circuits. In this thesis, a new approach is proposed involving dual dielectric of dual thicknesses (DKDT) for the reducing both ON and OFF state gate leakage. It is claimed that the simultaneous utilization of SiON and SiO2 each with multiple thicknesses is a better approach for gate leakage reduction than the conventional usage of a single gate dielectric (SiO2), possibly with multiple thicknesses. An algorithm is developed for DKDT assignment that minimizes the overall leakage for a circuit without compromising with the performance. Extensive experiments were carried out on ISCAS'85 benchmarks using 45nm technology which showed that the proposed approach can reduce the leakage, as much as 98% (in an average 89.5%), without degrading the performance.
- Region aware DCT domain invisible robust blind watermarking for color images.
- The multimedia revolution has made a strong impact on our society. The explosive growth of the Internet, the access to this digital information generates new opportunities and challenges. The ease of editing and duplication in digital domain created the concern of copyright protection for content providers. Various schemes to embed secondary data in the digital media are investigated to preserve copyright and to discourage unauthorized duplication: where digital watermarking is a viable solution. This thesis proposes a novel invisible watermarking scheme: a discrete cosine transform (DCT) domain based watermark embedding and blind extraction algorithm for copyright protection of the color images. Testing of the proposed watermarking scheme's robustness and security via different benchmarks proves its resilience to digital attacks. The detectors response, PSNR and RMSE results show that our algorithm has a better security performance than most of the existing algorithms.
- Capacity and Throughput Optimization in Multi-cell 3G WCDMA Networks
- User modeling enables in the computation of the traffic density in a cellular network, which can be used to optimize the placement of base stations and radio network controllers as well as to analyze the performance of resource management algorithms towards meeting the final goal: the calculation and maximization of network capacity and throughput for different data rate services. An analytical model is presented for approximating the user distributions in multi-cell third generation wideband code division multiple access (WCDMA) networks using 2-dimensional Gaussian distributions by determining the means and the standard deviations of the distributions for every cell. This model allows for the calculation of the inter-cell interference and the reverse-link capacity of the network. An analytical model for optimizing capacity in multi-cell WCDMA networks is presented. Capacity is optimized for different spreading factors and for perfect and imperfect power control. Numerical results show that the SIR threshold for the received signals is decreased by 0.5 to 1.5 dB due to the imperfect power control. The results also show that the determined parameters of the 2-dimensional Gaussian model match well with traditional methods for modeling user distribution. A call admission control algorithm is designed that maximizes the throughput in multi-cell WCDMA networks. Numerical results are presented for different spreading factors and for several mobility scenarios. Our methods of optimizing capacity and throughput are computationally efficient, accurate, and can be implemented in large WCDMA networks.
- Computational Epidemiology - Analyzing Exposure Risk: A Deterministic, Agent-Based Approach
- Many infectious diseases are spread through interactions between susceptible and infectious individuals. Keeping track of where each exposure to the disease took place, when it took place, and which individuals were involved in the exposure can give public health officials important information that they may use to formulate their interventions. Further, knowing which individuals in the population are at the highest risk of becoming infected with the disease may prove to be a useful tool for public health officials trying to curtail the spread of the disease. Epidemiological models are needed to allow epidemiologists to study the population dynamics of transmission of infectious agents and the potential impact of infectious disease control programs. While many agent-based computational epidemiological models exist in the literature, they focus on the spread of disease rather than exposure risk. These models are designed to simulate very large populations, representing individuals as agents, and using random experiments and probabilities in an attempt to more realistically guide the course of the modeled disease outbreak. The work presented in this thesis focuses on tracking exposure risk to chickenpox in an elementary school setting. This setting is chosen due to the high level of detailed information realistically available to school administrators regarding individuals' schedules and movements. Using an agent-based approach, contacts between individuals are tracked and analyzed with respect to both individuals and locations. The results are then analyzed using a combination of tools from computer science and geographic information science.
- CMOS Active Pixel Sensors for Digital Cameras: Current State-of-the-Art
- Image sensors play a vital role in many image sensing and capture applications. Among the various types of image sensors, complementary metal oxide semiconductor (CMOS) based active pixel sensors (APS), which are characterized by reduced pixel size, give fast readouts and reduced noise. APS are used in many applications such as mobile cameras, digital cameras, Webcams, and many consumer, commercial and scientific applications. With these developments and applications, CMOS APS designs are challenging the old and mature technology of charged couple device (CCD) sensors. With the continuous improvements of APS architecture, pixel designs, along with the development of nanometer CMOS fabrications technologies, APS are optimized for optical sensing. In addition, APS offers very low-power and low-voltage operations and is suitable for monolithic integration, thus allowing manufacturers to integrate more functionality on the array and building low-cost camera-on-a-chip. In this thesis, I explore the current state-of-the-art of CMOS APS by examining various types of APS. I show design and simulation results of one of the most commonly used APS in consumer applications, i.e. photodiode based APS. We also present an approach for technology scaling of the devices in photodiode APS to present CMOS technologies. Finally, I present the most modern CMOS APS technologies by reviewing different design models. The design of the photodiode APS is implemented using commercial CAD tools.
- A Multi-Variate Analysis of SMTP Paths and Relays to Restrict Spam and Phishing Attacks in Emails
Access: Use of this item is restricted to the UNT Community.
The classifier discussed in this thesis considers the path traversed by an email (instead of its content) and reputation of the relays, features inaccessible to spammers. Groups of spammers and individual behaviors of a spammer in a given domain were analyzed to yield association patterns, which were then used to identify similar spammers. Unsolicited and phishing emails were successfully isolated from legitimate emails, using analysis results. Spammers and phishers are also categorized into serial spammers/phishers, recent spammers/phishers, prospective spammers/phishers, and suspects. Legitimate emails and trusted domains are classified into socially close (family members, friends), socially distinct (strangers etc), and opt-outs (resolved false positives and false negatives). Overall this classifier resulted in far less false positives when compared to current filters like SpamAssassin, achieving a 98.65% precision, which is well comparable to the precisions achieved by SPF, DNSRBL blacklists.
- Optimal Access Point Selection and Channel Assignment in IEEE 802.11 Networks
- Designing 802.11 wireless networks includes two major components: selection of access points (APs) in the demand areas and assignment of radio frequencies to each AP. Coverage and capacity are some key issues when placing APs in a demand area. APs need to cover all users. A user is considered covered if the power received from its corresponding AP is greater than a given threshold. Moreover, from a capacity standpoint, APs need to provide certain minimum bandwidth to users located in the coverage area. A major challenge in designing wireless networks is the frequency assignment problem. The 802.11 wireless LANs operate in the unlicensed ISM frequency, and all APs share the same frequency. As a result, as 802.11 APs become widely deployed, they start to interfere with each other and degrade network throughput. In consequence, efficient assignment of channels becomes necessary to avoid and minimize interference. In this work, an optimal AP selection was developed by balancing traffic load. An optimization problem was formulated that minimizes heavy congestion. As a result, APs in wireless LANs will have well distributed traffic loads, which maximize the throughput of the network. The channel assignment algorithm was designed by minimizing channel interference between APs. The optimization algorithm assigns channels in such a way that minimizes co-channel and adjacent channel interference resulting in higher throughput.
- CLUE: A Cluster Evaluation Tool
- Modern high performance computing is dependent on parallel processing systems. Most current benchmarks reveal only the high level computational throughput metrics, which may be sufficient for single processor systems, but can lead to a misrepresentation of true system capability for parallel systems. A new benchmark is therefore proposed. CLUE (Cluster Evaluator) uses a cellular automata algorithm to evaluate the scalability of parallel processing machines. The benchmark also uses algorithmic variations to evaluate individual system components' impact on the overall serial fraction and efficiency. CLUE is not a replacement for other performance-centric benchmarks, but rather shows the scalability of a system and provides metrics to reveal where one can improve overall performance. CLUE is a new benchmark which demonstrates a better comparison among different parallel systems than existing benchmarks and can diagnose where a particular parallel system can be optimized.
- Occlusion Tolerant Object Recognition Methods for Video Surveillance and Tracking of Moving Civilian Vehicles
- Recently, there is a great interest in moving object tracking in the fields of security and surveillance. Object recognition under partial occlusion is the core of any object tracking system. This thesis presents an automatic and real-time color object-recognition system which is not only robust but also occlusion tolerant. The intended use of the system is to recognize and track external vehicles entered inside a secured area like a school campus or any army base. Statistical morphological skeleton is used to represent the visible shape of the vehicle. Simple curve matching and different feature based matching techniques are used to recognize the segmented vehicle. Features of the vehicle are extracted upon entering the secured area. The vehicle is recognized from either a digital video frame or a static digital image when needed. The recognition engine will help the design of a high performance tracking system meant for remote video surveillance.
- Automated defense against worm propagation.
Access: Use of this item is restricted to the UNT Community.
Worms have caused significant destruction over the last few years. Network security elements such as firewalls, IDS, etc have been ineffective against worms. Some worms are so fast that a manual intervention is not possible. This brings in the need for a stronger security architecture which can automatically react to stop worm propagation. The method has to be signature independent so that it can stop new worms. In this thesis, an automated defense system (ADS) is developed to automate defense against worms and contain the worm to a level where manual intervention is possible. This is accomplished with a two level architecture with feedback at each level. The inner loop is based on control system theory and uses the properties of PID (proportional, integral and differential controller). The outer loop works at the network level and stops the worm to reach its spread saturation point. In our lab setup, we verified that with only inner loop active the worm was delayed, and with both loops active we were able to restrict the propagation to 10% of the targeted hosts. One concern for deployment of a worm containment mechanism was degradation of throughput for legitimate traffic. We found that with proper intelligent algorithm we can minimize the degradation to an acceptable level.
- Energy-Aware Time Synchronization in Wireless Sensor Networks
- I present a time synchronization algorithm for wireless sensor networks that aims to conserve sensor battery power. The proposed method creates a hierarchical tree by flooding the sensor network from a designated source point. It then uses a hybrid algorithm derived from the timing-sync protocol for sensor networks (TSPN) and the reference broadcast synchronization method (RBS) to periodically synchronize sensor clocks by minimizing energy consumption. In multi-hop ad-hoc networks, a depleted sensor will drop information from all other sensors that route data through it, decreasing the physical area being monitored by the network. The proposed method uses several techniques and thresholds to maintain network connectivity. A new root sensor is chosen when the current one's battery power decreases to a designated value. I implement this new synchronization technique using Matlab and show that it can provide significant power savings over both TPSN and RBS.
- Design and Optimization of Components in a 45nm CMOS Phase Locked Loop
Access: Use of this item is restricted to the UNT Community.
A novel scheme of optimizing the individual components of a phase locked loop (PLL) which is used for stable clock generation and synchronization of signals is considered in this work. Verilog-A is used for the high level system design of the main components of the PLL, followed by the individual component wise optimization. The design of experiments (DOE) approach to optimize the analog, 45nm voltage controlled oscillator (VCO) is presented. Also a mixed signal analysis using the analog and digital Verilog behavior of components is studied. Overall a high level system design of a PLL, a systematic optimization of each of its components, and an analog and mixed signal behavioral design approach have been implemented using cadence custom IC design tools.
- Grid-based Coordinated Routing in Wireless Sensor Networks
- Wireless sensor networks are battery-powered ad-hoc networks in which sensor nodes that are scattered over a region connect to each other and form multi-hop networks. These nodes are equipped with sensors such as temperature sensors, pressure sensors, and light sensors and can be queried to get the corresponding values for analysis. However, since they are battery operated, care has to be taken so that these nodes use energy efficiently. One of the areas in sensor networks where an energy analysis can be done is routing. This work explores grid-based coordinated routing in wireless sensor networks and compares the energy available in the network over time for different grid sizes.
- Graph-based Centrality Algorithms for Unsupervised Word Sense Disambiguation
- This thesis introduces an innovative methodology of combining some traditional dictionary based approaches to word sense disambiguation (semantic similarity measures and overlap of word glosses, both based on WordNet) with some graph-based centrality methods, namely the degree of the vertices, Pagerank, closeness, and betweenness. The approach is completely unsupervised, and is based on creating graphs for the words to be disambiguated. We experiment with several possible combinations of the semantic similarity measures as the first stage in our experiments. The next stage attempts to score individual vertices in the graphs previously created based on several graph connectivity measures. During the final stage, several voting schemes are applied on the results obtained from the different centrality algorithms. The most important contributions of this work are not only that it is a novel approach and it works well, but also that it has great potential in overcoming the new-knowledge-acquisition bottleneck which has apparently brought research in supervised WSD as an explicit application to a plateau. The type of research reported in this thesis, which does not require manually annotated data, holds promise of a lot of new and interesting things, and our work is one of the first steps, despite being a small one, in this direction. The complete system is built and tested on standard benchmarks, and is comparable with work done on graph-based word sense disambiguation as well as lexical chains. The evaluation indicates that the right combination of the above mentioned metrics can be used to develop an unsupervised disambiguation engine as powerful as the state-of-the-art in WSD.
- E‐Shape Analysis
- The motivation of this work is to understand E-shape analysis and how it can be applied to various classification tasks. It has a powerful feature to not only look at what information is contained, but rather how that information looks. This new technique gives E-shape analysis the ability to be language independent and to some extent size independent. In this thesis, I present a new mechanism to characterize an email without using content or context called E-shape analysis for email. I explore the applications of the email shape by carrying out a case study; botnet detection and two possible applications: spam filtering and social-context based finger printing. The second part of this thesis takes what I apply E-shape analysis to activity recognition of humans. Using the Android platform and a T-Mobile G1 phone I collect data from the triaxial accelerometer and use it to classify the motion behavior of a subject.
- A CAM-based, high-performance classifier-scheduler for a video network processor.
- Classification and scheduling are key functionalities of a network processor. Network processors are equipped with application specific integrated circuits (ASIC), so that as IP (Internet Protocol) packets arrive, they can be processed directly without using the central processing unit. A new network processor is proposed called the video network processor (VNP) for real time broadcasting of video streams for IP television (IPTV). This thesis explores the challenge in designing a combined classification and scheduling module for a VNP. I propose and design the classifier-scheduler module which will classify and schedule data for VNP. The proposed module discriminates between IP packets and video packets. The video packets are further processed for digital rights management (DRM). IP packets which carry regular traffic will traverse without any modification. Basic architecture of VNP and architecture of classifier-scheduler module based on content addressable memory (CAM) and random access memory (RAM) has been proposed. The module has been designed and simulated in Xilinx 9.1i; is built in ISE simulator with a throughput of 1.79 Mbps and a maximum working frequency of 111.89 MHz at a power dissipation of 33.6mW. The code has been translated and mapped for Spartan and Virtex family of devices.
- Development, Implementation, and Analysis of a Contact Model for an Infectious Disease
- With a growing concern of an infectious diseases spreading in a population, epidemiology is becoming more important for the future of public health. In the past epidemiologist used existing data of an outbreak to help them determine how an infectious disease might spread in the future. Now with computational models, they able to analysis data produced by these models to help with prevention and intervention plans. This paper looks at the design, implementation, and analysis of a computational model based on the interactions of the population between individuals. The design of the working contact model looks closely at the SEIR model used as the foundation and the two timelines of a disease. The implementation of the contact model is reviewed while looking closely at data structures. The analysis of the experiments provide evidence this contact model can be used to help epidemiologist study the spread of an infectious disease based on the contact rate of individuals.
- A nano-CMOS based universal voltage level converter for multi-VDD SoCs.
- Power dissipation of integrated circuits is the most demanding issue for very large scale integration (VLSI) design engineers, especially for portable and mobile applications. Use of multiple supply voltages systems, which employs level converter between two voltage islands is one of the most effective ways to reduce power consumption. In this thesis work, a unique level converter known as universal level converter (ULC), capable of four distinct level converting operations, is proposed. The schematic and layout of ULC are built and simulated using CADENCE. The ULC is characterized by performing three analysis such as parametric, power, and load analysis which prove that the design has an average power consumption reduction of about 85-97% and capable of producing stable output at low voltages like 0.45V even under varying load conditions.
- Modeling and reduction of gate leakage during behavioral synthesis of nanoscale CMOS circuits.
Access: Use of this item is restricted to the UNT Community.
The major sources of power dissipation in a nanometer CMOS circuit are capacitive switching, short-circuit current, static leakage and gate oxide tunneling. However, with the aggressive scaling of technology the gate oxide direct tunneling current (gate leakage) is emerging as a prominent component of power dissipation. For sub-65 nm CMOS technology where the gate oxide (SiO2) thickness is very low, the direct tunneling current is the major form of tunneling. There are two contribution parts in this thesis: analytical modeling of behavioral level components for direct tunneling current and propagation delay, and the reduction of tunneling current during behavioral synthesis. Gate oxides of multiple thicknesses are useful in reducing the gate leakage dissipation. Analytical models from first principles to calculate the tunneling current and the propagation delay of behavioral level components is presented, which are backed by BSIM4/5 models and SPICE simulations. These components are characterized for 45 nm technology and an algorithm is provided for scheduling of datapath operations such that the overall tunneling current dissipation of a datapath circuit under design is minimal. It is observed that the oxide thickness that is being considered is very low it may not remain constant during the course of fabrication. Hence the algorithm takes process variation into consideration. Extensive experiments are conducted for various behavioral level benchmarks under various constraints and observed significant reductions, as high as 75.3% (with an average of 64.3%).
- Modeling Infectious Disease Spread Using Global Stochastic Field Simulation
- Susceptibles-infectives-removals (SIR) and its derivatives are the classic mathematical models for the study of infectious diseases in epidemiology. In order to model and simulate epidemics of an infectious disease, a global stochastic field simulation paradigm (GSFS) is proposed, which incorporates geographic and demographic based interactions. The interaction measure between regions is a function of population density and geographical distance, and has been extended to include demographic and migratory constraints. The progression of diseases using GSFS is analyzed, and similar behavior to the SIR model is exhibited by GSFS, using the geographic information systems (GIS) gravity model for interactions. The limitations of the SIR and similar models of homogeneous population with uniform mixing are addressed by the GSFS model. The GSFS model is oriented to heterogeneous population, and can incorporate interactions based on geography, demography, environment and migration patterns. The progression of diseases can be modeled at higher levels of fidelity using the GSFS model, and facilitates optimal deployment of public health resources for prevention, control and surveillance of infectious diseases.
- Voting Operating System (VOS)
Access: Use of this item is restricted to the UNT Community.
The electronic voting machine (EVM) plays a very important role in a country where government officials are elected into office. Throughout the world, a specific operating system that tends to the specific requirement of the EVM does not exist. Existing EVM technology depends upon the various operating systems currently available, thus ignoring the basic needs of the system. There is a compromise over the basic requirements in order to develop the systems on the basis on an already available operating system, thus having a lot of scope for error. It is necessary to know the specific details of the particular device for which the operating system is being developed. In this document, I evaluate existing EVMs and identify flaws and shortcomings. I propose a solution for a new operating system that meets the specific requirements of the EVM, calling it Voting Operating System (VOS, pronounced 'voice'). The identification technique can be simplified by using the fingerprint technology that determines the identity of a person based on two fingerprints. I also discuss the various parts of the operating system that have to be implemented that can tend to all the basic requirements of an EVM, including implementation of the memory manager, process manager and file system of the proposed operating system.
- FPGA Implementation of Low Density Party Check Codes Decoder
- Reliable communication over the noisy channel has become one of the major concerns in the field of digital wireless communications. The low density parity check codes (LDPC) has gained lot of attention recently because of their excellent error-correcting capacity. It was first proposed by Robert G. Gallager in 1960. LDPC codes belong to the class of linear block codes. Near capacity performance is achievable on a large collection of data transmission and storage.In my thesis I have focused on hardware implementation of (3, 6) - regular LDPC codes. A fully parallel decoder will require too high complexity of hardware realization. Partly parallel decoder has the advantage of effective compromise between decoding throughput and high hardware complexity. The decoding of the codeword follows the belief propagation alias probability propagation algorithm in log domain. A 9216 bit, (3, 6) regular LDPC code with code rate ½ was implemented on FPGA targeting Xilinx Virtex 4 XC4VLX80 device with package FF1148. This decoder achieves a maximum throughput of 82 Mbps. The entire model was designed in VHDL in the Xilinx ISE 9.2 environment.