You limited your search to:

 Department: Department of Electrical Engineering
 Collection: UNT Theses and Dissertations
A Preliminary Controller Design for Drone Carried Directional Communication System

A Preliminary Controller Design for Drone Carried Directional Communication System

Date: August 2015
Creator: AL-Emrani, Firas
Description: In this thesis, we conduct a preliminary study on the controller design for directional antenna devices carried by drones. The goal of the control system is to ensure the best alignment between two directional antennas so as to enhance the performance of air-to-air communication between the drones. The control system at the current stage relies on the information received from GPS devices. The control system includes two loops: velocity loop and position loop to suppress wind disturbances and to assure the alignment of two directional antennae. The simulation and animation of directional antennae alignment control for two-randomly moving drones was developed using SIMULINK. To facilitate RSSI-based antenna alignment control to be conducted in the future work, a study on initial scanning techniques is also included at the end of this thesis.
Contributing Partner: UNT Libraries
Development of a Cost Effective Wireless Sensor System for Indoor Air Quality Monitoring Applications

Development of a Cost Effective Wireless Sensor System for Indoor Air Quality Monitoring Applications

Date: May 2014
Creator: Abraham, Sherin
Description: Poor air quality can greatly affect the public health. Research studies indicate that indoor air can be more polluted than the outdoor air. An indoor air quality monitoring system will help to create an awareness of the quality of air inside which will eventually help in improving it. The objective of this research is to develop a low cost wireless sensor system for indoor air quality monitoring. The major cost reduction of the system is achieved by using low priced sensors. Interface circuits had to be designed to make these sensors more accurate. The system is capable of measuring carbon dioxide, carbon monoxide, ozone, temperature, humidity and volatile organic compounds. The prototype sensor node modules were developed. The sensor nodes were the connected together by Zigbee network. The nodes were developed in such a way that it is compact in size and wireless connection of sensor nodes enable to collect air quality data from multiple locations simultaneously. The collected data was stored in a computer. We employed linear least-square approach for the calibration of each sensor to derive a conversion formula for converting the sensor readings to engineering units. The system was tested with different pollutants and data collected was ...
Contributing Partner: UNT Libraries
Low Leakage Asymmetric Stacked Sram Cell

Low Leakage Asymmetric Stacked Sram Cell

Date: May 2014
Creator: Ahrabi, Nina
Description: Memory is an important part of any digital processing system. On-chip SRAM can be found in various levels of the memory hierarchy in a processor and occupies a considerable area of the chip. Leakage is one of the challenges which shrinking of technology has introduced and the leakage of SRAM constitutes a substantial part of the total leakage power of the chip due to its large area and the fact that many of the cells are idle without any access. In this thesis, we introduce asymmetric SRAM cells using stacked transistors which reduce the leakage up to 26% while increasing the delay of the cell by only 1.2% while reducing the read noise margin of the cell by only 15.7%. We also investigate an asymmetric cell configuration in which increases the delay by 33% while reduces the leakage up to 30% and reducing the read noise margin by only 1.2% compared to a regular SRAM cell.
Contributing Partner: UNT Libraries
Consensus Building in Sensor Networks and Long Term Planning for the National Airspace System

Consensus Building in Sensor Networks and Long Term Planning for the National Airspace System

Date: May 2011
Creator: Akula, Naga Venkata Swathik
Description: In this thesis, I present my study on the impact of multi-group network structure on the performance of consensus building strategies, and the preliminary mathematical formulation of the problem on improving the performance of the National Airspace system (NAS) through long-term investment. The first part of the thesis is concerned with a structural approach to the consensus building problem in multi-group distributed sensor networks (DSNs) that can be represented by bipartite graph. Direct inference of the convergence behavior of consensus strategies from multi-group DSN structure is one of the contributions of this thesis. The insights gained from the analysis facilitate the design and development of DSNs that meet specific performance criteria. The other part of the thesis is concerned with long-term planning and development of the NAS at a network level, by formulating the planning problem as a resource allocation problem for a flow network. The network-level model viewpoint on NAS planning and development will give insight to the structure of future NAS and will allow evaluation of various paradigms for the planning problem.
Contributing Partner: UNT Libraries
An Interactive Framework for Teaching Fundamentals of Digital Logic Design and VLSI Design

An Interactive Framework for Teaching Fundamentals of Digital Logic Design and VLSI Design

Date: August 2014
Creator: Battina, Brahmasree
Description: Integrated Circuits (ICs) have a broad range of applications in healthcare, military, consumer electronics etc. The acronym VLSI stands for Very Large Scale Integration and is a process of making ICs by placing millions of transistors on a single chip. Because of advancements in VLSI design technologies, ICs are getting smaller, faster in speed and more efficient, making personal devices handy, and with more features. In this thesis work an interactive framework is designed in which the fundamental concepts of digital logic design and VLSI design such as logic gates, MOS transistors, combinational and sequential logic circuits, and memory are presented in a simple, interactive and user friendly way to create interest in students towards engineering fields, especially Electrical Engineering and Computer Engineering. Most of the concepts are explained in this framework by taking the examples which we see in our daily lives. Some of the critical design concerns such as power and performance are presented in an interactive way to make sure that students can understand these significant concepts in an easy and user friendly way.
Contributing Partner: UNT Libraries
Development of Wireless Sensor Network System for Indoor Air Quality Monitoring

Development of Wireless Sensor Network System for Indoor Air Quality Monitoring

Date: December 2012
Creator: Borkar, Chirag
Description: This thesis describes development of low cost indoor air quality (IAQ) monitoring system for research. It describes data collection of various parameters concentration present in indoor air and sends data back to host PC for further processing. Thesis gives detailed information about hardware and software implementation of IAQ monitoring system. Also discussed are building wireless ZigBee network, creating user friendly graphical user interface (GUI) and analysis of obtained results in comparison with professional benchmark system to check system reliability. Throughputs obtained are efficient enough to use system as a reliable IAQ monitor.
Contributing Partner: UNT Libraries
A Real-Time Electronic Sound Analysis System with Graphical User Interface

A Real-Time Electronic Sound Analysis System with Graphical User Interface

Date: August 2011
Creator: Brgulja, Amir
Description: Noise-induced hearing loss is a serious problem common to musical environments. Current dosimetry technology is primarily designed for industrial environments and not suited for musical settings. At present, there are no government regulations that apply to the educational music environment as it relates to monitoring and prevention of hearing loss. Also, no system exists than can serve as a proactive tool in observation and reporting of sound exposure levels with the goal of hearing conservation. Newly proposed system takes a software based approach in designing a proactive dosimetry system that can assess the risk of sound noise exposure. It provides real-time feedback trough a graphical user interface that is capable of database storage for further study.
Contributing Partner: UNT Libraries
An Arduino Based Control System for a Brackish Water Desalination Plant

An Arduino Based Control System for a Brackish Water Desalination Plant

Date: August 2015
Creator: Caraballo, Ginna
Description: Water scarcity for agriculture is one of the most important challenges to improve food security worldwide. In this thesis we study the potential to develop a low-cost controller for a small scale brackish desalination plant that consists of proven water treatment technologies, reverse osmosis, cation exchange, and nanofiltration to treat groundwater into two final products: drinking water and irrigation water. The plant is powered by a combination of wind and solar power systems. The low-cost controller uses Arduino Mega, and Arduino DUE, which consist of ATmega2560 and Atmel SAM3X8E ARM Cortex-M3 CPU microcontrollers. These are widely used systems characterized for good performance and low cost. However, Arduino also requires drivers and interfaces to allow the control and monitoring of sensors and actuators. The thesis explains the process, as well as the hardware and software implemented.
Contributing Partner: UNT Libraries
Communication System over Gnu Radio and OSSIE

Communication System over Gnu Radio and OSSIE

Date: December 2011
Creator: Cheng, Zizhi
Description: GNU Radio and OSSIE (Open-Source SCA (Software communication architecture) Implementation-Embedded) are two open source software toolkits for SDR (Software Defined Radio) developments, both of them can be supported by USRP (Universal Software Radio Peripheral). In order to compare the performance of these two toolkits, an FM receiver over GNU Radio and OSSIE are tested in my thesis, test results are showed in Chapter 4 and Chapter 5. Results showed that the FM receiver over GNU Radio has better performance, due to the OSSIE is lack of synchronization between USRP interface and the modulation /demodulation components. Based on this, the SISO (Single Input Single Output) communication system over GNU Radio is designed to transmit and receive sound or image files between two USRP equipped with RFX2400 transceiver at 2.45G frequency. Now, GNU Radio and OSSIE are widely used for academic research, but the future work based on GNU Radio and OSSIE can be designed to support MIMO, sensor network, and real time users etc.
Contributing Partner: UNT Libraries
Dynamic Wifi Fingerprinting Indoor Positioning System

Dynamic Wifi Fingerprinting Indoor Positioning System

Date: August 2014
Creator: Costilla Reyes, Omar
Description: A technique is proposed to improve the accuracy of indoor positioning systems based on WIFI radio-frequency signals by using dynamic access points and fingerprints (DAFs). Moreover, an indoor position system that relies solely in DAFs is proposed. The walking pattern of indoor users is classified as dynamic or static for indoor positioning purposes. I demonstrate that the performance of a conventional indoor positioning system that uses static fingerprints can be enhanced by considering dynamic fingerprints and access points. The accuracy of the system is evaluated using four positioning algorithms and two random access point selection strategies. The system facilitates the location of people where there is no wireless local area network (WLAN) infrastructure deployed or where the WLAN infrastructure has been drastically affected, for example by natural disasters. The system can be used for search and rescue operations and for expanding the coverage of an indoor positioning system.
Contributing Partner: UNT Libraries
FIRST PREV 1 2 3 4 5 NEXT LAST