Search Results

open access

Design Space Exploration of Domain Specific CGRAs Using Crowd-sourcing

Description: CGRAs (coarse grained reconfigurable array architectures) try to fill the gap between FPGAs and ASICs. Over three decades, the research towards CGRA design has produced number of architectures. Each of these designs lie at different points on a line drawn between FPGAs and ASICs, depending on the tradeoffs and design choices made during the design of architectures. Thus, design space exploration (DSE) takes a very important role in the circuit design process. In this work I propose the design spa… more
Date: August 2014
Creator: Sistla, Anil Kumar
Partner: UNT Libraries
open access

Dynamic WIFI Fingerprinting Indoor Positioning System

Description: A technique is proposed to improve the accuracy of indoor positioning systems based on WIFI radio-frequency signals by using dynamic access points and fingerprints (DAFs). Moreover, an indoor position system that relies solely in DAFs is proposed. The walking pattern of indoor users is classified as dynamic or static for indoor positioning purposes. I demonstrate that the performance of a conventional indoor positioning system that uses static fingerprints can be enhanced by considering dynamic… more
Date: August 2014
Creator: Reyes, Omar Costilla
Partner: UNT Libraries
open access

The Effect of Mobility on Wireless Sensor Networks

Description: Wireless sensor networks (WSNs) have gained attention in recent years with the proliferation of the micro-electro-mechanical systems, which has led to the development of smart sensors. Smart sensors has brought WSNs under the spotlight and has created numerous different areas of research such as; energy consumption, convergence, network structures, deployment methods, time delay, and communication protocols. Convergence rates associated with information propagations of the networks will be ques… more
Date: August 2014
Creator: Hasir, Ibrahim
Partner: UNT Libraries
open access

An Interactive Framework for Teaching Fundamentals of Digital Logic Design and VLSI Design

Description: Integrated Circuits (ICs) have a broad range of applications in healthcare, military, consumer electronics etc. The acronym VLSI stands for Very Large Scale Integration and is a process of making ICs by placing millions of transistors on a single chip. Because of advancements in VLSI design technologies, ICs are getting smaller, faster in speed and more efficient, making personal devices handy, and with more features. In this thesis work an interactive framework is designed in which the fundame… more
Date: August 2014
Creator: Battina, Brahmasree
Partner: UNT Libraries
open access

Teaching Fundamentals of Digital Logic Design and VLSI Design Using Computational Textiles

Description: This thesis presents teaching fundamentals of digital logic design and VLSI design for freshmen and even for high school students using e-textiles. This easily grabs attention of students as it is creative and interesting. Using e-textiles to project these concepts would be easily understood by students at young age. This involves stitching electronic circuits on a fabric using basic components like LEDs, push buttons and so on. The functioning of these circuits is programmed in Lilypad Arduino… more
Date: August 2014
Creator: Inampudi, Sivateja
Partner: UNT Libraries
open access

Networking and Decentralized Control in Layered Networks: a Theoretical Study and Test-bed Development

Description: Layered structures are commonly used in communication systems, but their roles in decentralized control are not understood well. In the first part of this thesis, a theoretical study of consensus (a typical decentralized control task) in layered structures is conducted. The unique graph topology approach permits explicit characterization of consensus performance based on simple graphical characteristics of MLMG structures. In the second part of this thesis, a generic LEGO test-bed to mimic mult… more
Date: December 2014
Creator: Sheth, Vardhman Jayeshkumar
Partner: UNT Libraries
open access

Optimal Sensor Placement for Structural Health Monitoring

Description: In large-scale civil structures, a limited number of sensors are placed to monitor the health of civil structures to reduce maintenance, communication and energy costs. In this thesis, the problem of optimal sensor location placement to infer the health of civil structures is explored. First, a comparative study of approaches from the fields of control engineering and civil engineering is conducted . The widely used civil engineering approaches such as effective independence (EI) and modal assu… more
Date: December 2014
Creator: Movva, Gopichand
Partner: UNT Libraries
open access

Reliability of Electronics

Description: The purpose of this research is not to research new technology but how to improve existing technology and understand how the manufacturing process works. Reliability Engineering fall under the category of Quality Control and uses predictions through statistical measurements and life testing to figure out if a specific manufacturing technique will meet customer satisfaction. The research also answers choice of materials and choice of manufacturing process to provide a device that will not only m… more
Date: December 2014
Creator: Wickstrom, Larry E.
Partner: UNT Libraries
open access

Airbourne WiFi Networks Through Directional Antenna: An Experimental Study

Description: In situations where information infrastructure is destroyed or not available, on-demand information infrastructure is pivotal for the success of rescue missions. In this paper, a drone-carried on demand information infrastructure for long-distance WiFi transmission system is developed. It can be used in the areas including emergency response, public event, and battlefield. The WiFi network can be connected to the Internet to extend WiFi access to areas where WiFi and other Internet infrastructu… more
Date: May 2015
Creator: Gu, Yixin
Partner: UNT Libraries
open access

Design of Multi Band Microwave Devices Using Coupled Line Transmission Lines

Description: Multi band technology helps in getting multiple operating frequencies using a single microwave device. This thesis presents the design of dual and tri band microwave devices using coupled transmission line structures. Chapter 2 presents the design of a novel dual band transmission line structure using coupled lines. In chapter 3, Design of a dual band branch line coupler and a dual band Wilkinson power divider are proposed using the novel dual band transmission line structure presented in the p… more
Date: May 2015
Creator: Katakam, Sri
Partner: UNT Libraries
open access

Dual-Band Quarter Wavelength and Half Wavelength Microstrip Transmission Line Design

Description: The thesis represents the design for dual-band quarter wavelength and half wavelength microstrip transmission line. Chapter 2 proposed the design of a novel dual-band asymmetric pi-shaped short-circuited quarter wavelength microstrip transmission line working at frequencies 1GHz and 1.55 GHz for 50Ω transmission line and at frequencies 1GHz and 1.43GHz for 60Ω transmission line. Chapter 3 proposed the design of a novel dual-band quarter wavelength microstrip transmission line with asymmetricall… more
Date: May 2015
Creator: Imran, Md Asheque
Partner: UNT Libraries
open access

Practical Robust MIMO OFDM Communication System for High-Speed Mobile Communication

Description: This thesis presents the design of a communication system (PRCS) which improves on all aspects of the current state of the art 4G communication system Long Term Evolution (LTE) including peak to average power ratio (PAPR), data reliability, spectral efficiency and complexity using the most recent state of the art research in the field combined with novel implementations. This research is relevant and important to the field of electrical and communication engineering because it provides benefits… more
Date: May 2015
Creator: Grabner, Mitchell John James
Partner: UNT Libraries
open access

Quantitative Correlation Analysis of Motor and Dysphonia Features of Parkinsons Disease

Description: The research reported here deals with the early characterization of Parkinson’s disease (PD), the second most common degenerative disease of the human motor system after Alzheimer’s. PD results from the death of dopaminergic neurons in the substantia nigra region of the brain. Its occurrence is highly correlated with the aging population whose numbers increase with the healthcare benefits of a longer life. Observation of motor control symptoms associated with PD, such as gait and speech analysi… more
Date: May 2015
Creator: Koduri, Balaram
Partner: UNT Libraries
open access

An Arduino Based Control System for a Brackish Water Desalination Plant

Description: Water scarcity for agriculture is one of the most important challenges to improve food security worldwide. In this thesis we study the potential to develop a low-cost controller for a small scale brackish desalination plant that consists of proven water treatment technologies, reverse osmosis, cation exchange, and nanofiltration to treat groundwater into two final products: drinking water and irrigation water. The plant is powered by a combination of wind and solar power systems. The low-cost c… more
Date: August 2015
Creator: Caraballo, Ginna
Partner: UNT Libraries
open access

Design fully-integrated dual-band two-stage class-E CMOS PA

Description: In retrospect we can see that from the last century, wireless electronic technology has been in a rapid state of development. With the popularity of wireless communication, the power amplifier demand is rising. In general, magnitude, maximum noise figure, minimum noise figure, efficiency, and output power are important indicators of the amplifier. The IC industry is exploring how to reduce the additional cost and improve the high-frequency performance. Therefore, designing a strong adaptability… more
Date: August 2015
Creator: Zhao, Chao
Partner: UNT Libraries
open access

Design of Frequency Output Pressure Transducer

Description: Piezoelectricity crystal is used in different area in industry, such as downhole oil, gas industry, and ballistics. The piezoelectricity crystals are able to create electric fields due to mechanical deformation called the direct piezoelectric effect, or create mechanical deformation due to the effect of electric field called the indirect piezoelectric effect. In this thesis, piezoelectricity effect is the core part. There are 4 parts in the frequency output pressure transducer: two crystal osci… more
Date: August 2015
Creator: Ma, Jinge
Partner: UNT Libraries
open access

Modeling and Control of a Motor System Using the Lego EV3 Robot

Description: In this thesis, I present my work on the modeling and control of a motor system using the Lego EV3 robot. The overall goal is to apply introductory systems and controls engineering techniques for estimation and design to a real-world system. First I detail the setup of materials used in this research: the hardware used was the Lego EV3 robot; the software used was the Student 2014 version of Simulink; a wireless network was used to communicate between them using a Netgear WNA1100 wifi dongle. N… more
Date: August 2015
Creator: Mitchell, Ashley C.
Partner: UNT Libraries
open access

A Preliminary Controller Design for Drone Carried Directional Communication System

Description: In this thesis, we conduct a preliminary study on the controller design for directional antenna devices carried by drones. The goal of the control system is to ensure the best alignment between two directional antennas so as to enhance the performance of air-to-air communication between the drones. The control system at the current stage relies on the information received from GPS devices. The control system includes two loops: velocity loop and position loop to suppress wind disturbances and … more
Date: August 2015
Creator: AL-Emrani, Firas
Partner: UNT Libraries
open access

Parameter Estimation of Microwave Filters

Description: The focus of this thesis is on developing theories and techniques to extract lossy microwave filter parameters from data. In the literature, the Cauchy methods have been used to extract filters’ characteristic polynomials from measured scattering parameters. These methods are described and some examples are constructed to test their performance. The results suggest that the Cauchy method does not work well when the Q factors representing the loss of filters are not even. Based on some prototype… more
Date: December 2015
Creator: Sun, Shuo
Partner: UNT Libraries
open access

AirSniffer: A Smartphone-Based Sensor Module for Personal Micro-Climate Monitoring

Description: Environmental factors can have a significant impact on an individual's health and well-being, and a primary characteristic of environments is air quality. Air sensing equipment is available to the public, but it is often expensive,stationary, or unusable for persons without technical expertise. The goal of this project is to develop an inexpensive and portable sensor module for public use. The system is capable of measuring temperature in Celsius and Fahrenheit, heat index, relative humidity, a… more
Date: May 2016
Creator: Smith, Jeffrey Paul
Partner: UNT Libraries
open access

Implementation of an Unmanned Aerial Vehicle for New Generation Peterbilt Trucks

Description: As science and technology continue to advance, innovative developments in transportation can enhance product safety and security for the benefit and welfare of society. The federal government requires every commercial truck to be inspected before each trip. This pre-trip inspection ensures the safe mechanical condition of each vehicle before it is used. An Unmanned Aerial Vehicle (UAV) could be used to provide an automated inspection, thus reducing driver workload, inspection costs and time whi… more
Date: May 2016
Creator: Srinivasan K, Venkatesh
Partner: UNT Libraries
open access

Applied Real-Time Integrated Distributed Control Systems: An Industrial Overview and an Implemented Laboratory Case Study

Description: This thesis dissertation mainly compares and investigates laboratory study of different implementation methodologies of applied control systems and how they can be adopted in industrial, as well as commercial, automation applications. Namely the research paper aims to assess or evaluate eventual feedback control loops' performance and robustness over multiple conventional or state-of-the-art technologies in the field of applied industrial automation and instrumentation by implementing a laborat… more
Date: August 2016
Creator: Zaitouni, Wael K
Partner: UNT Libraries
open access

The Design and Implementation of an Effective Vision-Based Leader-Follower Tracking Algorithm Using PI Camera

Description: The thesis implements a vision-based leader-follower tracking algorithm on a ground robot system. One camera is the only sensor installed the leader-follower system and is mounted on the follower. One sphere is the only feature installed on the leader. The camera identifies the sphere in the openCV Library and calculates the relative position between the follower and leader using the area and position of the sphere in the camera frame. A P controller for the follower and a P controller for the … more
Date: August 2016
Creator: Li, Songwei
Partner: UNT Libraries
open access

Measurement and Analysis of Indoor Air Quality Conditions

Description: More than 80% of the people in urban regions and about 98% of cities in low and middle income countries have poor air quality according to the World Health Organization. People living in such environment suffer from many disorders like a headache, shortness of breath or even the worst diseases like lung cancer, asthma etc. The main objective of the thesis is to create awareness about the air quality and the factors that are causing air pollution to the people which is really important and provi… more
Date: August 2016
Creator: Chidurala, Veena
Partner: UNT Libraries
Back to Top of Screen