You limited your search to:

  Partner: UNT Libraries
 Degree Discipline: Electrical Engineering
 Collection: UNT Theses and Dissertations
Simulation and Performance Analysis of Strategic Air Traffic Management under Weather Uncertainty

Simulation and Performance Analysis of Strategic Air Traffic Management under Weather Uncertainty

Date: May 2011
Creator: Zhou, Yi
Description: In this thesis, I introduce a promising framework for representing an air traffic flow (stream) and flow-management action operating under weather uncertainty. I propose to use a meshed queuing and Markov-chain model---specifically, a queuing model whose service-rates are modulated by an underlying Markov chain describing weather-impact evolution---to capture traffic management in an uncertain environment. Two techniques for characterizing flow-management performance using the model are developed, namely 1) a master-Markov-chain representation technique that yields accurate results but at relatively high computational cost, and 2) a jump-linear system-based approximation that has promising scalability. The model formulation and two analysis techniques are illustrated with numerous examples. Based on this initial study, I believe that the interfaced weather-impact and traffic-flow model analyzed here holds promise to inform strategic flow contingency management in NextGen.
Contributing Partner: UNT Libraries
Design and Implementation of Broad Band and Narrow Band Antennas and Their Applications

Design and Implementation of Broad Band and Narrow Band Antennas and Their Applications

Date: August 2011
Creator: Salmani, Zeeshan
Description: The thesis deals with the design and implementation of broadband and narrowband antennas and their applications in practical environment. In this thesis, a new concept for designing the UWB antenna is proposed based on the CRLH metamaterials and this UWB antenna covers a frequency range from 2.45 GHz to 11.6 GHz. Based on the design of the UWB antenna, another antenna is developed that can cover a very wide bandwidth i.e from 0.66 GHz to 120 GHz. This antenna can not only be used for UWB applications but also for other communication systems working below the UWB spectrum such as GSM, GPS, PCS and Bluetooth. The proposed antenna covering the bandwidth from 0.66 GHz to 120 GHz is by far the largest bandwidth antenna developed based on metamaterials. Wide band antennas are not preferred for sensing purpose as it is difficult to differentiate the received signals. A multiband antenna which can be used as a strain sensor for structural health monitoring is proposed. The idea is to correlate the strain applied along the length or width with the multiple resonant frequencies. This gives the advantage of detecting the strain applied along any direction (either length or width), thus increasing the ...
Contributing Partner: UNT Libraries
Kalman Filtering Approach to Optimize OFDM Data Rate

Kalman Filtering Approach to Optimize OFDM Data Rate

Date: August 2011
Creator: Wunnava, Sashi Prabha
Description: This study is based on applying a non-linear mapping method, here the unscented Kalman filter; to estimate and optimize data rate resulting from the arrival rate having a Poisson distribution in an orthogonal frequency division multiplexing (OFDM) transmission system. OFDM is an emerging multi-carrier modulation scheme. With the growing need for quality of service in wireless communications, it is highly necessary to optimize resources in such a way that the overall performance of the system models should rise while keeping in mind the objective to achieve high data rate and efficient spectral methods in the near future. In this study, the results from the OFDM-TDMA transmission system have been used to apply cross-layer optimization between layers so as to treat different resources between layers simultaneously. The main controller manages the transmission of data between layers using the multicarrier modulation techniques. The unscented Kalman filter is used here to perform nonlinear mapping by estimating and optimizing the data rate, which result from the arrival rate having a Poisson distribution.
Contributing Partner: UNT Libraries
Matlab Implementation of a Tornado Forward Error Correction Code

Matlab Implementation of a Tornado Forward Error Correction Code

Date: May 2011
Creator: Noriega, Alexandra
Description: This research discusses how the design of a tornado forward error correcting channel code (FEC) sends digital data stream profiles to the receiver. The complete design was based on the Tornado channel code, binary phase shift keying (BPSK) modulation on a Gaussian channel (AWGN). The communication link was simulated by using Matlab, which shows the theoretical systems efficiency. Then the data stream was input as data to be simulated communication systems using Matlab. The purpose of this paper is to introduce the audience to a simulation technique that has been successfully used to determine how well a FEC expected to work when transferring digital data streams. The goal is to use this data to show how FEC optimizes a digital data stream to gain a better digital communications systems. The results conclude by making comparisons of different possible styles for the Tornado FEC code.
Contributing Partner: UNT Libraries
A Real-Time Electronic Sound Analysis System with Graphical User Interface

A Real-Time Electronic Sound Analysis System with Graphical User Interface

Date: August 2011
Creator: Brgulja, Amir
Description: Noise-induced hearing loss is a serious problem common to musical environments. Current dosimetry technology is primarily designed for industrial environments and not suited for musical settings. At present, there are no government regulations that apply to the educational music environment as it relates to monitoring and prevention of hearing loss. Also, no system exists than can serve as a proactive tool in observation and reporting of sound exposure levels with the goal of hearing conservation. Newly proposed system takes a software based approach in designing a proactive dosimetry system that can assess the risk of sound noise exposure. It provides real-time feedback trough a graphical user interface that is capable of database storage for further study.
Contributing Partner: UNT Libraries
A Bidirectional Two-Hop Relay Network Using GNU Radio and USRP

A Bidirectional Two-Hop Relay Network Using GNU Radio and USRP

Date: August 2011
Creator: Le, Johnny
Description: A bidirectional two-hop relay network with decode-and-forward strategy is implemented using GNU Radio (software) and several USRPs (hardware) on Ubuntu (operating system). The relay communication system is comprised of three nodes; Base Station A, Base Station B, and Relay Station (the intermediate node). During the first time slot, Base Station A and Base Station B will each transmit data, e.g., a JPEG file, to Relay Station using DBPSK modulation and FDMA. For the final time slot, Relay Station will perform a bitwise XOR of the data, and transmit the XORed data to Base Station A and Base Station B, where the received data is decoded by performing another XOR operation with the original data.
Contributing Partner: UNT Libraries
Development of Indium Oxide Nanowires as Efficient Gas Sensors

Development of Indium Oxide Nanowires as Efficient Gas Sensors

Access: Use of this item is restricted to the UNT Community.
Date: December 2011
Creator: Gali, Pradeep
Description: Crystalline indium oxide nanowires were synthesized following optimization of growth parameters. Oxygen vacancies were found to impact the optical and electronic properties of the as-grown nanowires. Photoluminescence measurements showed a strong U.V emission peak at 3.18 eV and defect peaks in the visible region at 2.85 eV, 2.66 eV and 2.5 eV. The defect peaks are attributed to neutral and charged states of oxygen vacancies. Post-growth annealing in oxygen environment and passivation with sulphur are shown to be effective in reducing the intensity of the defect induced emission. The as-grown nanowires connected in an FET type of configuration shows n-type conductivity. A single indium oxide nanowire with ohmic contacts was found to be sensitive to gas molecules adsorbed on its surface.
Contributing Partner: UNT Libraries
Development of Silicon Nanowire Field Effect Transistors

Development of Silicon Nanowire Field Effect Transistors

Access: Use of this item is restricted to the UNT Community.
Date: December 2011
Creator: Nukala, Prathyusha
Description: An economically reliable technique for the synthesis of silicon nanowire was developed using silicon chloride as source material. The 30-40 micron long nanowires were found to have diameters ranging from 40 – 100 nm. An amorphous oxide shell covered the nanowires, post-growth. Raman spectroscopy confirmed the composition of the shell to be silicon-dioxide. Photoluminescence measurements of the as-grown nanowires showed green emission, attributed to the presence of the oxide shell. Etching of the oxide shell was found to decrease the intensity of green emission. n-type doping of the silicon nanowires was achieved using antimony as the dopant. The maximum dopant concentration was achieved by post-growth diffusion. Intrinsic nanowire parameters were determined by implementation of the as-grown and antimony doped silicon nanowires in field effect transistor configuration.
Contributing Partner: UNT Libraries
Dual-band Microwave Components And Their Applications

Dual-band Microwave Components And Their Applications

Date: December 2011
Creator: Shao, Jin
Description: In general, Dual-Band technology enables microwave components to work at two different frequencies. This thesis introduces novel dual-band microwave components and their applications. Chapter 2 presents a novel compact dual-band balun (converting unbalanced signals to balanced ones). The ratio between two working frequencies is analyzed. A novel compact microstrip crossover (letting two lines to cross each other with very high isolation) and its dual-band application is the subject of chapter 3. A dual-frequency cloak based on lumped LC-circuits is introduced in chapter 4. In chapter 5, a dual-band RF device to detect dielectric constant changes of liquids in polydimethylsiloxane (PDMS) microfluidic channels has been presented. Such a device is very sensitive, and it has significantly improved the stability. Finally, conclusion of this thesis and future works are given in chapter 6.
Contributing Partner: UNT Libraries
Automatic Extraction of Highlights from a Baseball Video Using HMM and MPEG-7 Descriptors

Automatic Extraction of Highlights from a Baseball Video Using HMM and MPEG-7 Descriptors

Date: May 2011
Creator: Saudagar, Abdullah Naseer Ahmed
Description: In today’s fast paced world, as the number of stations of television programming offered is increasing rapidly, time accessible to watch them remains same or decreasing. Sports videos are typically lengthy and they appeal to a massive crowd. Though sports video is lengthy, most of the viewer’s desire to watch specific segments of the video which are fascinating, like a home-run in a baseball or goal in soccer i.e., users prefer to watch highlights to save time. When associated to the entire span of the video, these segments form only a minor share. Hence these videos need to be summarized for effective presentation and data management. This thesis explores the ability to extract highlights automatically using MPEG-7 features and hidden Markov model (HMM), so that viewing time can be reduced. Video is first segmented into scene shots, in which the detection of the shot is the fundamental task. After the video is segmented into shots, extraction of key frames allows a suitable representation of the whole shot. Feature extraction is crucial processing step in the classification, video indexing and retrieval system. Frame features such as color, motion, texture, edges are extracted from the key frames. A baseball highlight contains certain ...
Contributing Partner: UNT Libraries