UNT Theses and Dissertations - 88 Matching Results

Search Results

Results: 1 - 24 next

In-situ Electrochemical Surface Engineering in Additively Manufactured CoCrMo for Enhanced Biocompatibility

Description: Laser-based additive manufacturing is inherently associated with extreme, unprecedented, and rapid thermokinetics which impact the microstructural evolution in a built component. Such a unique, near to non-equilibrium microstructure/phase evolution in laser additively manufactured metallic components impact their properties in engineering application. In light of this, the present work investigates the unique microstructural traits as a result of process induced spatial and temporal variation i… more
This item is restricted from view until June 1, 2024.
Date: May 2023
Creator: Mazumder, Sangram
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

The Influence of Particle Morphology and Heat Treatment on the Microstructural Evolution of Silver Inks for Additively Manufactured RF Applications: A Comparison between Nanoflake and Reactive Inks

Description: In recent years, advancements in additive manufacturing (AM) technologies have paved the way for 3D-printed flexible hybrid electronics (FHE) and created opportunities for extending these gains to RF applications. However, printed metal interconnects and devices are typically characterized by high porosity and chemical impurities that significantly limit their electrical conductivity and RF performance compared to bulk equivalents. Using direct ink writing (DIW), two silver inks, a nanoflake su… more
Date: May 2023
Creator: Summers, Jason Masao
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Laser Powder Bed Fusion of H13 Tool Steel: Experiments, Process Optimization and Microstructural Characterization

Description: This work focused on laser powder bed fusion (LPBF) of H13 tool steel to examine microstructure and melt pool morphology. Experiments were conducted with varying laser power (P) in the range of 90-180 W and scan speed (v) in the range of 500-1000 mm/s. layer thickness (l) and hatch spacing (h) were kept constant. Volumetric energy density (γ) was calculated using the above process parameters. In order to find a relation between the recorded density and top surface roughness with changing proces… more
Date: May 2023
Creator: Channa Reddy, Sumanth Kumar Reddy
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries

Structures of Multicomponent Silicate and Borosilicate Glasses from Molecular Dynamics Simulations: Effects of Iron Redox Ratio and Cation Field Strength

Description: Multicomponent silicate and borosilicate glasses find wide technological applications ranging from optical fibers, biomedicine to nuclear waste disposal. As a common component of earth's mantle and nuclear waste, iron is a frequent encounter in silicate and borosilicate melts and glasses. The redox ratio in glass matrix defined by the ratio of ferrous and ferric ions is dependent on factors such as temperature, pressure, and oxygen fugacity. Understanding their roles on the short- and medium-ra… more
This item is restricted from view until June 1, 2024.
Date: May 2023
Creator: Tuheen, Manzila Islam
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Characterization and Chemical Analysis of Fundamental Components for Lead Acid Batteries

Description: Although markets for alternative batteries, such as Li-ion, are growing, Pb-alloy batteries still dominate the market due to their low cost and good functionality. Even though these Pb-alloy batteries have been around since their discovery in 1859, little research involving advanced characterization techniques, such as synchrotron radiation X-ray diffraction (SR-XRD) and transmission electron diffraction (TEM) have been performed on Pb-alloys and sulfation, a failure mode in lead acid batteries… more
Date: May 2022
Creator: Wall, Michael T
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries

Considerations in Designing Alloys for Laser-Powder Bed Fusion Additive Manufacturing

Description: This work identifies alloy terminal freezing range, columnar growth, grain coarsening, liquid availability towards the terminal stage of solidification, and segregation towards boundaries as primary factors affecting the hot-cracking susceptibility of fusion-based additive manufacturing (F-BAM) processed alloys. Additionally, an integrated computational materials engineering (ICME)-based approach has been formulated to design novel Al alloys, and high entropy alloys for F-BAM processing. The IC… more
This item is restricted from view until June 1, 2027.
Date: May 2022
Creator: Thapliyal, Saket
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries

Corrosion Behavior of High Entropy Alloys in Molten Chloride and Molten Fluoride Salts

Description: High entropy alloys (HEAs) or complex concentrated alloys (CCAs) represent a new paradigm in structural alloy design. Molten salt corrosion behavior was studied for single-phase HEAs such as TaTiVWZr and HfTaTiVZr, and multi-phase HEAs such as AlCoCrFeNi2.1. De-alloying with porosity formation along the exposed surface and fluxing of unstable oxides were found to be primary corrosion mechanisms. Potentiodynamic polarization study was combined with systematic mass–loss study for TaTiVWZr, HfTaT… more
This item is restricted from view until June 1, 2024.
Date: May 2022
Creator: Patel, Kunjalkumar Babubhai
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries

Design and Performance of Metal Matrix Composite Composed of Porous Boron Carbide Created by Magnetic Field-Assisted Freeze Casting Infiltrated with Aluminum (A356)

Description: Magnetic field-assisted freeze-casting was used to create porous B4C ceramic preforms. An optimum slurry consisted of a mixture of B4C powders with 6 wt.% Er2O3 powder in an H2O-PVA solution and was cooled at a rate of 1 °C/min from room temperature to -30 °C resulting in porous green state ceramic preform with vertical channels. The Er2O3 powder was added to improve the magnetic response of the slurry. The preform was then sublimated to remove H2O and then sintered. The sintered ceramic prefor… more
Date: May 2022
Creator: Gamboa, Gerardo
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Effect of Modifier Cation Substitution on Structure and Properties of Bioactive Glasses from Molecular Dynamics Simulations

Description: Bioactive glass is a type of third generation bioactive material that can bond to both soft and hard tissue with applications ranging from bone defect repair, coatings for metallic implants, to scaffolds for tissue engineering. Design of bioactive glasses for these applications rely on a detailed understanding of the structures of these glasses which are complicated and multicomponent. In this thesis, I have applied molecular dynamics (MD) simulations with interatomic potentials developed in ou… more
Date: May 2022
Creator: Vu, Myra
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Fabrication of the Novel Asymmetric Polymeric Materials via Bottom-Up Approach

Description: Asymmetric polymeric materials can be formed by either top-down or bottom-up methods. Bottom-up methods involve assembling the atoms and molecules to form small nanostructures by carefully controlled synthesis, which results in a reduction of some of the top-down limitations. In this dissertation, thermal, tribological and antireflective properties of polymeric materials have been enhanced by introducing structural asymmetry. The overall performance of commercial polymeric coatings, e.g. epoxy … more
Date: May 2022
Creator: Hnatchuk, Nataliia
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries

Integration, Stability, and Doping of Mono-Elemental and Binary Transition Metal Dichalcogenide Van der Waals Solids for Electronics and Sensing Devices

Description: In this work, we have explored 2D semiconducting transition metal dichalcogenides (TMDs), black phosphorus (BP), and graphene for various applications using liquid and mechanical exfoliation routes. The topical areas of interest that motivate our work include considering factors such as device integration, stability, doping, and the effect of gasses to modulate the electronic transport characteristics of the underlying 2D materials. In the first area, we have integrated solution-processed trans… more
This item is restricted from view until June 1, 2024.
Date: May 2022
Creator: Mehta, Ravindra K
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Mechanically Driven Reconstruction of Materials at Sliding Interfaces to Control Wear

Description: To minimize global carbon emissions, having efficient jet engines and internal combustion engines necessitates utilizing lightweight alloys such as Al, Ti, and Mg-based alloys. Because of their remarkable strength/weight ratio, these alloys have received a lot of attention. Nonetheless, they have very poor tribological behavior, particularly at elevated temperatures beyond 200 °C, when most liquid lubricants begin to fail in lubrication. Over the last two decades, there has been a lot of intere… more
Date: May 2022
Creator: Shirani, Asghar
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries

A Study on High Pressure-Induced Phase Transformations of a Metastable Complex Concentrated Alloy System with Varying Amounts of Copper

Description: Complex concentrated alloys (CCAs) offer the unique ability to tune composition and microstructure to achieve a wide range of mechanical performance. Recently, the development of metastable CCAs has led to the creation of transformation-induced plasticity (TRIP) CCAs. Similar to TRIP steels, TRIP CCAs are more effective at absorbing high strain rate loads when TRIP is activated during the loading process. The objective of our study is to investigate the effect of copper on the critical pressure… more
Date: May 2022
Creator: Reynolds, Christopher
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries

Time-Dependent Deformation Mechanisms in Metallic Glasses as a Function of Their Structural State

Description: In this study, the time-dependent deformation behavior of several model bulk metallic glasses (BMGs) was studied. The BMGs were obtained in different structural states by thermal relaxation below their glass transition temperature, cryogenic thermal cycling, and chemical rejuvenation by micro-alloying. The creep behavior of Zr52.5Ti5Cu17.9Ni14.6Al10 BMG in different structural states was investigated as a function of peak load and temperature. The creep strain rate sensitivity (SRS) indicated a… more
This item is restricted from view until June 1, 2024.
Date: May 2022
Creator: Ghodki, Nandita
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries

Tuning of Microstructure and Mechanical Properties in Additively Manufactured Metastable Beta Titanium Alloys

Description: The results from this study, on a few commercial and model metastable beta titanium alloys, indicate that the growth restriction factor (GRF) model fails to interpret the grain growth behavior in the additively manufactured alloys. In lieu of this, an approach based on the classical nucleation theory of solidification incorporating the freezing range has been proposed for the first time to rationalize the experimental observations. Beta titanium alloys with a larger solidification range (liquid… more
This item is restricted from view until June 1, 2024.
Date: May 2022
Creator: Nartu, Mohan Sai Kiran Kumar Yadav
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries

Wear, Friction and High Shear Strain Deformation of Metallic Glasses

Description: In this work, wear and scratch behavior of four different bulk metallic glasses (BMGs) namely Zr41.2Cu12.5Ni10Ti13.8Be22.5 (LM 1), Zr57Cu15.4Ni12.6Al10Nb5 (LM 106), Ni60Pd20P17B3 (Ni-BMG), and Pt57.5Cu14.7Ni5.3P22.5 (Pt-BMG) were compared. Shear band formation on the edges of the scratch groove with spallation was found to be the primary failure mechanism in progressive scratch tests. The wear behavior and the scratch response of model binary Ni-P metallic glasses was systematically studied as … more
This item is restricted from view until June 1, 2024.
Date: May 2022
Creator: Pole, Mayur
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries

Alloy Design, Processing and Deformation Behavior of Metastable High Entropy Alloys

Description: This dissertation presents an assortment of research aimed at understanding the composition-dependence of deformation behavior and the response to thermomechanical processing, to enable efficient design and processing of low stacking fault energy (SFE) high entropy alloy (HEAs). The deformation behavior and SFE of four low SFE HEAs were predicted and experimentally verified using electron microscopy and in-situ neutron diffraction. A new approach of employing a minimization function to refine … more
Date: May 2021
Creator: Frank, Michael (Materials science researcher)
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries

Crystallization and Lithium Ion Diffusion Mechanism in the Lithium-Aluminum-Germanium-Phosphate Glass-Ceramic Solid Electrolytes

Description: NASCION-type lithium-aluminum-germanium-phosphate (LAGP) glass-ceramic is one of the most promising solid electrolyte (SEs) material for the next generation Li-ion battery. Based on the crystallization of glass-ceramic material, the two-step heat treatment was designed to control the crystallization of Li-ion conducting crystal in the glass matrix. The results show that the LAGP crystal is preferred to internally crystalize, Tg + 60%∆T is the nucleation temperature that provides the highest ion… more
Date: May 2021
Creator: Kuo, Po Hsuen
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries

Defect-Engineered Two-Dimensional Transition Metal Dichalcogenides for High-Efficient Piezoelectric Sensor

Description: Piezoelectricity in two-dimensional (2D) transition metal dichalcogenides (TMDs) has attracted significant attention due to their unique crystal structure and the lack of inversion centers when the bulk TMDs thin down to monolayer. Although the piezoelectricity effect in atomic-thickness TMDs has been demonstrated, they are not scalable. Herein, we demonstrate a piezoelectric effect from large-scale, sputtered MoS2 and WS2 using a robust defect-engineering based on the thermal-solvent annealing… more
Date: May 2021
Creator: Kim, Junyoung
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries

Effects of Surface Texture and Porosity on the Corrosion Behavior and Biocompatibility of Pure Zinc Biomaterials for Orthopedic Applications

Description: In this dissertation, small and large NaCl particle-derived surfaces (Ra > 40 microns) were generated on 2D Zn materials, and the surfaces were carefully studied concerning topography, corrosion behavior, and bone cell compatibility. Increases in surface roughness accelerated the corrosion rate, and cell viability was maintained. This method was then extended to 3D porous scaffolds prepared by a hybrid AM/casting technique. The scaffolds displayed a near-net shape, an interconnected pore struct… more
Date: May 2021
Creator: Cockerill, Irsalan
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Engineering the Uniform Lying Helical Structure in Chiral Nematic Liquid Crystal Phase: From Morphology Transition to Dimension Control

Description: Chiral nematic liquid crystals or cholesteric liquid crystals (CLC) can be obtained by adding a chiral dopant into a nematic liquid crystal. Liquid crystal molecules spontaneously rotate along a long axis to form helical structures in CLC system. Both pitch size and orientation of the helical structure is determined by the boundary conditions and can be further tuned by external stimuli. Particularly, the uniform lying helical structure of CLC has attracted intensive attention due to its beam s… more
Date: May 2021
Creator: Jia, Zhixuan
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries

High Strain Rate Deformation Behavior of Single-Phase and Multi-Phase High Entropy Alloys

Description: Fundamental understanding of high strain rate deformation behavior of materials is critical in designing new alloys for wide-ranging applications including military, automobile, spacecraft, and industrial applications. High entropy alloys, consisting of multiple elements in (near) equimolar proportions, represent a new paradigm in structural alloy design providing ample opportunity for achieving excellent performance in high strain rate applications by proper selection of constituent elements a… more
Date: May 2021
Creator: Muskeri, Saideep
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries

Investigation of Porous Ceramic Structure by Freeze-Casting

Description: The design and fabrication of porous ceramic materials with anisotropic properties has, in recent years, gained popularity due to their potential application in various areas that include medical, energy, defense, space, and aerospace. Freeze-casting is an effective, low-cost, and safe method as a wet shaping technique to create these structures. To control the morphology of these materials, many critical factors were found to play an important role. In this dissertation, the processing paramet… more
Date: May 2021
Creator: Bakkar, Said Adnan
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries

Optical Emission Spectroscopy Monitoring Method for Additively Manufactured Iron-Nickel and Other Complex Alloy Samples

Description: The method of optical emission spectroscopy has been used with Fe-Ni and other complex alloys to investigate in-situ compositional control for additive manufacturing. Although additive manufacturing of metallic alloys is an emerging technology, compositional control will be a challenge that needs to be addressed for a multitude of industries going forward for next-gen applications. This current scope of work includes analysis of ionized species generated from laser and metal powder interaction … more
Date: May 2021
Creator: Flannery, David A. (David Andrew)
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
Back to Top of Screen