UNT Theses and Dissertations - 245 Matching Results

Search Results

prev Results: 81 - 104 next
open access

Mechanisms of Formation and Effects of Transition Metal Oxides in Silicon Nitride on Steel Dry Sliding Contacts

Description: Silicon nitride on steel sliding contacts may provide advantageous tribological properties over traditional self-mated pairs, however the friction and wear behavior at high sliding speeds (>1 m/s) is not well understood. Previous studies at low sliding speeds (< 1 m/s) have found that the wear mechanisms change as a function of the operating parameters, e.g. atmosphere, sliding speed, load, and temperature, due to the formation of transition metal oxides such as Fe2O3 and Fe3O4. This study dete… more
Date: December 2018
Creator: Harris, Michael D.
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Molecular Dynamics Simulations of the Structures and Properties of Aluminosilicate and Borosilicate Glasses

Description: Silicate glasses are the most common glass types and have impact on almost every aspect in our lives: from window, containers, to glass fibers for telecommunications. Unlike their crystalline counterparts, glass materials lack long-range order in their atomic arrangement but their structures do possess short and medium range characteristics that play critical roles in their physical and chemical properties. Despite active development of characterization techniques that have contributed to the u… more
Date: December 2018
Creator: Ren, Mengguo
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Process Improvement of Surface Preparation of Structuraly Bonded Helicopter Detail Parts

Description: The objective of this study was to increase the bond strength at the surface interface of a thin stainless-steel panel for structural bonding on a helicopter. To achieve this objective, six activation methods for applying the coating to the panel in the surface preparation process are presented and explored. Adhesion and roughness tests were conducted to determine which method consistently initiates the etch and improves the bond at the surface. Based on the test results, three methods proved t… more
Date: December 2018
Creator: Tafoya, Keirsten Breann
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Laser Surface Modification of AZ31B Mg Alloy Bio-Implant Material

Description: Magnesium and its alloys are considered as the potential biomaterials due to their biocompatibility and biodegradable characteristics but suffer from poor corrosion performance. Various surface modification techniques are employed to improve their corrosion resistance. In present case, laser surface melting was carried out on AZ31B Mg alloy with various laser energy densities using a continuous wave ytterbium laser. Effect of laser treatment on phase and microstructure evolution was evaluated b… more
Date: August 2018
Creator: Wu, Tso-chang
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Room and Elevated Temperature Sliding Wear Behavior of Cold Sprayed Ni-WC Composite Coatings

Description: The tribological properties of cold sprayed Ni-WC metal matrix composite (MMC) coatings were investigated under dry sliding conditions from room temperature (RT) up to 400°C, and during thermal cycling to explore their temperature adaptive friction and wear behavior. Characterization of worn surfaces was conducted using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and Raman spectroscopy to determine the chemical and microstructural evolution during friction testing.… more
Date: August 2018
Creator: Torgerson, Tyler B.
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Ultrasonic Processing of Aluminum 2139 and 7050

Description: Acoustics is the study of all sound waves, with ultrasound classified as those frequencies above 20,000 Hz. Currently, ultrasound is being used in many industries for a variety of purposes such as ultrasonic imaging, ultrasonic assisted friction stir welding, and ultrasonic spot welding. Despite these uses, the effects of ultrasound on phase stability and resultant mechanical properties has been minimally analyzed. Here we study the impact waves play in ultrasonic welding and design an appar… more
Date: August 2018
Creator: Reed, Jordan Derek
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Alloy Development and High-Energy X-Ray Diffraction Studies of NiTiZr and NiTiHf High Temperature Shape Memory Alloys

Description: NiTi-based shape memory alloys (SMAs) offer a good combination of high-strength, ductility, corrosion resistance, and biocompatibility that has served them well and attracted the attention of many researchers and industries. The alloys unique thermo-mechanical ability to recover their initial shape after relatively large deformations by heating or upon unloading due to a characteristic reversible phase transformation makes them useful as damping devices, solid state actuators, couplings, etc. H… more
Date: May 2018
Creator: Carl, Matthew A
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Defining a Relationship between the Flexibility of Materials and Other Properties

Description: Brittleness of a polymeric material has a direct relationship with the material's performance and furthermore shares an inverse relationship with that material's flexibility. The concept of flexibility of materials has been understood but merely explained with a hand-waving manner. Thus, it has never been defined by a calculation, thereby lacking the ability to determine a definite quantitative value for this characteristic. Herein, an equation is presented and proven which makes determining th… more
Date: May 2018
Creator: Osmanson, Allison Theresa
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Investigation into the Semiconducting and Device Properties of MoTe2 and MoS2 Ultra-Thin 2D Materials

Description: The push for electronic devices on smaller and smaller scales has driven research in the direction of transition metal dichalcogenides (TMD) as new ultra-thin semiconducting materials. These ‘two-dimensional' (2D) materials are typically on the order of a few nanometers in thickness with a minimum all the way down to monolayer. These materials have several layer-dependent properties such as a transition to direct band gap at single-layer. In addition, their lack of dangling bonding and remarkab… more
Date: May 2018
Creator: Sirota, Benjamin
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Preventing Thermal Degradation of Pvc Insulation by Mixtures of Cross-Linking Agents and Antioxidants

Description: Poly(vinyl chloride)(PVC) wire and cable insulation has poor thermal stability, causing the plasticizer to separate from the PVC chain and produce an oily residue, lowering the tensile elongation at break and thus increasing brittleness. We have added 4 wt.% of three different types of cross-linking agents and antioxidants, as well as mixtures of both, to improve the thermal stability of the plasticizer and tensile properties of PVC after thermal exposure. We performed tensile tests, tribologic… more
Date: May 2018
Creator: Kim, Taehwan
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Processing of NiTi Shape Memory Alloys through Low Pressure and Low Temperature Hydrogen Charging

Description: Many industries including the medical, aerospace, and automobile industries have increasingly adopted the use of shape memory alloys (SMAs) for a plethora of applications due to their unique thermomechanical properties. From the commercially available SMAs in the market, binary NiTi SMAs have shown the most desirable properties. However, SMA properties can be significantly affected by the fabrication process. One of the most familiar applications of NiTi SMAs is in the design of actuating devic… more
Date: May 2018
Creator: Briseno Murguia, Silvia
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Processing-Structure-Property Relationships of Spark Plasma Sintered Boron Carbide and Titanium Diboride Ceramic Composites

Description: The aim of this study was to understand the processing – structure – property relationships in spark plasma sintered (SPS) boron carbide (B4C) and B4C-titanium diboride (TiB2) ceramic composites. SPS allowed for consolidation of both B4C and B4C-TiB2 composites without sintering additives, residual phases, e.g., graphite, and excessive grain growth due to long sintering times. A selection of composite compositions in 20% TiB2 feedstock powder increments from 0% to 100%, was sintered at 1900°C… more
Date: May 2018
Creator: Rubink, William S.
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Recycling of PVC and XLPE for High Impact Resistance in Spool Development

Description: My work focuses on taking waste wire-grade PVC = poly(vinyl chloride) and waste XLPE = cross-linked polyethylene and recycle them into small wire/cable spool technology in order to reduce waste cost and reduce cost of spool production. The PVC and XLPE were provided by Encore Wire Corp. of McKinney, TX; they have also defined the standard to which I am comparing my results. The end goal is to incorporate as much PVC and XLPE into the spools while maintaining material toughness, impact resistanc… more
Date: May 2018
Creator: Granowski, Gregory A
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

A Study on NiTiSn Low-Temperature Shape Memory Alloys and the Processing of NiTiHf High-Temperature Shape Memory Alloys

Description: Shape memory alloys (SMAs) operating as solid-state actuators pose economic and environmental benefits to the aerospace industry due to their lightweight, compact design, which provides potential for reducing fuel emissions and overall operating cost in aeronautical equipment. Despite wide applicability, the implementation of SMA technology into aerospace-related actuator applications is hindered by harsh environmental conditions, which necessitate extremely high or low transformation temperatu… more
Date: May 2018
Creator: Young, Avery W
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Surface Chemistry and Work Function of Irradiated and Nanoscale Thin Films Covered Indium Tin Oxides

Description: In this study, we used UV-ozone Ar sputtering, X-ray photoelectron and ultra-violet photoelectron spectroscopies and sputtering based depositions of RuO2 and Se nano-layers on indium tin oxides (ITOs). We elucidated the effect of Ar sputtering on the composition and chemistry of Sn rich ITO surface. We demonstrated that while a combination of UV-ozone radiation and Ar sputtering removes most of the hydrocarbons responsible for degrading the work function of ITO, it also removes significant amou… more
Date: May 2018
Creator: Che, Hui
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Effects of HALSs and Nano-ZnO Worked as UV Stabilizers of Polypropylene

Description: This work reports the outdoor weathering performance of ultraviolet (UV)-stabilized polypropylene (PP) products (using PP resins from Encore Wire). Different hindered amine light stabilizers (HALSs) and nano-ZnO were used to stabilize PP-film-based formulations that were exposed under UV light for 6 weeks simulating for in harsh outdoor weather of Dallas, Texas, USA in 2016. Characterization of the exposed PP film products was done in terms of mechanical and friction spectroscopic properties. T… more
Date: December 2017
Creator: Lu, Xinyao
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Modeling of High Strain Rate Compression of Austenitic Shape Memory Alloys

Description: Shape memory alloys (SMAs) exhibit the ability to absorb large dynamic loads and, therefore, are excellent candidates for structural components where impact loading is expected. Compared to the large amount of research on the shape memory effect and/or pseudoelasticity of polycrystalline SMAs under quasi-static loading conditions, studies on dynamic loading are limited. Experimental research shows an apparent difference between the quasi-static and high strain rate deformation of SMAs. Research… more
Date: December 2017
Creator: Yu, Hao
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Molecular Dynamics Simulations of the Structure and Properties of Boron Containing Oxide Glasses: Empirical Potential Development and Applications

Description: Potential parameters that can handle multi-component oxide glass systems especially boron oxide are very limited in literature. One of the main goals of my dissertation is to develop empirical potentials to simulate multi-component oxide glass systems with boron oxide. Two approaches, both by introducing the composition dependent parameter feature, were taken and both led to successful potentials for boron containing glass systems after extensive testing and fitting. Both potential sets can pro… more
Date: December 2017
Creator: Deng, Lu
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Non-Isothermal Laser Treatment of Fe-Si-B Metallic Glass

Description: Metallic glasses possess attractive properties, such as high strength, good corrosion resistance, and superior soft magnetic performance. They also serve as precursors for synthesizing nanocrystalline materials. In addition, a new class of composites having crystalline phases embedded in amorphous matrix is evolving based on selective crystallization of metallic glasses. Therefore, crystallization of metallic glasses and its effects on properties has been a subject of interest. Previous investi… more
Date: December 2017
Creator: Joshi, Sameehan Shrikant
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

P-type Doping of Pulsed Laser Deposited WS2 with Nb

Description: Layered transition metal dichalcogenides (TMDs) are potentially ideal semiconducting materials due to their in-plane carrier transport and tunable bandgaps, which are favorable properties for electrical and optoelectronic applications. However, the ability to make p-n junctions is the foundation of semiconductor devices, and therefore the ability to achieve reproducible p- and n-type doping in TMD semiconducting materials is critical. In this work, p-type substitutional doping of pulsed laser d… more
Date: December 2017
Creator: Egede, Eforma Justin
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Surface Degradation Behavior of Bulk Metallic Glasses and High Entropy Alloys

Description: In this study, the surface degradation behavior was studied for typical examples from bulk metallic glasses (BMGs), metallic glass composites (MGCs) and high entropy alloys (HEAs) alloy systems that are of scientific and commercial interest. The corrosion and wear behavior of two Zr-based bulk metallic glasses, Zr41.2Cu12.5Ni10Ti13.8Be22.5 and Zr57Cu15.4Ni12.6Al10Nb5, were evaluated in as-cast and thermally relaxed states. Significant improvement in corrosion rate, wear behavior, and friction c… more
Date: December 2017
Creator: Ayyagari, Venkata A
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Three-Dimensional Carbon Nanostructure and Molybdenum Disulfide (MoS2) for High Performance Electrochemical Energy Storage Devices

Description: My work presents a novel approach to fabricate binder free three-dimensional carbon nanotubes/sulfur (3DCNTs/S) hybrid composite by a facile and scalable method increasing the loading amount from 1.86 to 8.33 mg/cm2 highest reported to date with excellent electrochemical performance exhibiting maximum specific energy of ~1233Wh/kg and specific power of ~476W/kg, with respect to the mass of the cathode. Such an excellent performance is attributed to the fact that 3DCNTs offers higher loading amo… more
Date: December 2017
Creator: Patel, Mumukshu D.
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Additive Manufacturing of Metastable Beta Titanium Alloys

Description: Additive manufacturing processes of many alloys are known to develop texture during the deposition process due to the rapid reheating and the directionality of the dissipation of heat. Titanium alloys and with respect to this study beta titanium alloys are especially susceptible to these effects. This work examines Ti-20wt%V and Ti-12wt%Mo deposited under normal additive manufacturing process parameters to examine the texture of these beta-stabilized alloys. Both microstructures contained co… more
Date: August 2017
Creator: Yannetta, Christopher James
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Developing Precipitation Hardenable High Entropy Alloys

Description: High entropy alloys (HEAs) is a concept wherein alloys are constructed with five or more elements mixed in equal proportions; these are also known as multi-principle elements (MPEs) or complex concentrated alloys (CCAs). This PhD thesis dissertation presents research conducted to develop precipitation-hardenable high entropy alloys using a much-studied fcc-based equi-atomic quaternary alloy (CoCrFeNi). Minor additions of aluminium make the alloy amenable for precipitating ordered intermetallic … more
Date: August 2017
Creator: Gwalani, Bharat
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
Back to Top of Screen