UNT Theses and Dissertations - 11 Matching Results

Search Results

Results: 1 - 11
open access

Defining a Relationship between the Flexibility of Materials and Other Properties

Description: Brittleness of a polymeric material has a direct relationship with the material's performance and furthermore shares an inverse relationship with that material's flexibility. The concept of flexibility of materials has been understood but merely explained with a hand-waving manner. Thus, it has never been defined by a calculation, thereby lacking the ability to determine a definite quantitative value for this characteristic. Herein, an equation is presented and proven which makes determining th… more
Date: May 2018
Creator: Osmanson, Allison Theresa
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

High Temperature Water as an Etch and Clean for SiO2 and Si3N4

Description: An environmentally friendly, and contamination free process for etching and cleaning semiconductors is critical to future of the IC industry. Under the right conditions, water has the ability to meet these requirements. Water becomes more reactive as a function of temperature in part because the number of hydronium and hydroxyl ions increase. As water approaches its boiling point, the concentration of these species increases over seven times their concentrations at room temperature. At 150 °C, … more
Date: December 2018
Creator: Barclay, Joshua David
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Mechanisms of Formation and Effects of Transition Metal Oxides in Silicon Nitride on Steel Dry Sliding Contacts

Description: Silicon nitride on steel sliding contacts may provide advantageous tribological properties over traditional self-mated pairs, however the friction and wear behavior at high sliding speeds (>1 m/s) is not well understood. Previous studies at low sliding speeds (< 1 m/s) have found that the wear mechanisms change as a function of the operating parameters, e.g. atmosphere, sliding speed, load, and temperature, due to the formation of transition metal oxides such as Fe2O3 and Fe3O4. This study dete… more
Date: December 2018
Creator: Harris, Michael D.
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Preventing Thermal Degradation of Pvc Insulation by Mixtures of Cross-Linking Agents and Antioxidants

Description: Poly(vinyl chloride)(PVC) wire and cable insulation has poor thermal stability, causing the plasticizer to separate from the PVC chain and produce an oily residue, lowering the tensile elongation at break and thus increasing brittleness. We have added 4 wt.% of three different types of cross-linking agents and antioxidants, as well as mixtures of both, to improve the thermal stability of the plasticizer and tensile properties of PVC after thermal exposure. We performed tensile tests, tribologic… more
Date: May 2018
Creator: Kim, Taehwan
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Process Improvement of Surface Preparation of Structuraly Bonded Helicopter Detail Parts

Description: The objective of this study was to increase the bond strength at the surface interface of a thin stainless-steel panel for structural bonding on a helicopter. To achieve this objective, six activation methods for applying the coating to the panel in the surface preparation process are presented and explored. Adhesion and roughness tests were conducted to determine which method consistently initiates the etch and improves the bond at the surface. Based on the test results, three methods proved t… more
Date: December 2018
Creator: Tafoya, Keirsten Breann
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Processing of NiTi Shape Memory Alloys through Low Pressure and Low Temperature Hydrogen Charging

Description: Many industries including the medical, aerospace, and automobile industries have increasingly adopted the use of shape memory alloys (SMAs) for a plethora of applications due to their unique thermomechanical properties. From the commercially available SMAs in the market, binary NiTi SMAs have shown the most desirable properties. However, SMA properties can be significantly affected by the fabrication process. One of the most familiar applications of NiTi SMAs is in the design of actuating devic… more
Date: May 2018
Creator: Briseno Murguia, Silvia
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Processing-Structure-Property Relationships of Spark Plasma Sintered Boron Carbide and Titanium Diboride Ceramic Composites

Description: The aim of this study was to understand the processing – structure – property relationships in spark plasma sintered (SPS) boron carbide (B4C) and B4C-titanium diboride (TiB2) ceramic composites. SPS allowed for consolidation of both B4C and B4C-TiB2 composites without sintering additives, residual phases, e.g., graphite, and excessive grain growth due to long sintering times. A selection of composite compositions in 20% TiB2 feedstock powder increments from 0% to 100%, was sintered at 1900°C… more
Date: May 2018
Creator: Rubink, William S.
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Recycling of PVC and XLPE for High Impact Resistance in Spool Development

Description: My work focuses on taking waste wire-grade PVC = poly(vinyl chloride) and waste XLPE = cross-linked polyethylene and recycle them into small wire/cable spool technology in order to reduce waste cost and reduce cost of spool production. The PVC and XLPE were provided by Encore Wire Corp. of McKinney, TX; they have also defined the standard to which I am comparing my results. The end goal is to incorporate as much PVC and XLPE into the spools while maintaining material toughness, impact resistanc… more
Date: May 2018
Creator: Granowski, Gregory A
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Room and Elevated Temperature Sliding Wear Behavior of Cold Sprayed Ni-WC Composite Coatings

Description: The tribological properties of cold sprayed Ni-WC metal matrix composite (MMC) coatings were investigated under dry sliding conditions from room temperature (RT) up to 400°C, and during thermal cycling to explore their temperature adaptive friction and wear behavior. Characterization of worn surfaces was conducted using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and Raman spectroscopy to determine the chemical and microstructural evolution during friction testing.… more
Date: August 2018
Creator: Torgerson, Tyler B.
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

A Study on NiTiSn Low-Temperature Shape Memory Alloys and the Processing of NiTiHf High-Temperature Shape Memory Alloys

Description: Shape memory alloys (SMAs) operating as solid-state actuators pose economic and environmental benefits to the aerospace industry due to their lightweight, compact design, which provides potential for reducing fuel emissions and overall operating cost in aeronautical equipment. Despite wide applicability, the implementation of SMA technology into aerospace-related actuator applications is hindered by harsh environmental conditions, which necessitate extremely high or low transformation temperatu… more
Date: May 2018
Creator: Young, Avery W
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Ultrasonic Processing of Aluminum 2139 and 7050

Description: Acoustics is the study of all sound waves, with ultrasound classified as those frequencies above 20,000 Hz. Currently, ultrasound is being used in many industries for a variety of purposes such as ultrasonic imaging, ultrasonic assisted friction stir welding, and ultrasonic spot welding. Despite these uses, the effects of ultrasound on phase stability and resultant mechanical properties has been minimally analyzed. Here we study the impact waves play in ultrasonic welding and design an appar… more
Date: August 2018
Creator: Reed, Jordan Derek
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
Back to Top of Screen