Technical Report Archive & Image Library (TRAIL) - 181 Matching Results

Search Results

prev Results: 31 - 54 next
open access

Coal-Mine Accidents in the United States, 1930

Description: Report compiled by the U.S. Bureau of Mines including statistics on fatal and non-fatal accidents in coal mines located in the United States as well as data regarding the various operations (e.g., number of miners employed and average production). The information is organized into tables for comparison and the text draws some overall conclusions in the summary.
Date: 1932
Creator: Adams, W. W.; Geyer, L. E. & Chenoweth, L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Combustion of Gaseous Mixtures

Description: This report not only presents matters of practical importance in the classification of engine fuels, for which other means have proved inadequate, but also makes a few suggestions. It confirms the results of Withrow and Boyd which localize the explosive wave in the last portions of the mixture burned. This being the case, it may be assumed that the greater the normal combustion, the less the energy developed in the explosive form. In order to combat the detonation, it is therefore necessary to … more
Date: November 1932
Creator: Duchene, R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Combustion Velocity of Benzine-Benzol-Air Mixtures in High-Speed Internal-Combustion Engines

Description: "The present paper describes a device whereby rapid flame movement within an internal-combustion engine cylinder may be recorded and determined. By the aid of a simple cylindrical contact and an oscillograph the rate of combustion within the cylinder of an airplane engine during its normal operation may be measured for gas intake velocities of from 30 to 35 m/s and for velocities within the cylinder of from 20 to 25 m/s. With it the influence of mixture ratios, of turbulence, of compression rat… more
Date: April 1932
Creator: Schnauffer, Kurt
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Comparative Performance of a Powerplus Vane-Type Supercharger and an N.A.C.A. Roots-Type Supercharger

Description: "This report presents the results of tests of a Powerplus supercharger and a comparison of its performance with the performance previously obtained with an N.A.C.A. Roots-type supercharger. The Powerplus supercharger is a positive displacement blower of the vane type having mechanically operated vanes, the movement of which is controlled by slots and eccentrics. The supercharger was tested at a range of pressure differences from 0 to 15 inches of mercury and at speeds from 500 to 2,500 r.p.m." … more
Date: July 1932
Creator: Schey, Oscar W. & Ellerbrock, Herman H., Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A comparison between the theoretical and measured longitudinal stability characteristics of an airplane

Description: This report covers an investigation of the application of the theory of dynamic longitudinal stability, based on the assumption of small oscillations, to oscillations an airplane is likely to undergo in flight. The investigation was conducted with a small parasol monoplane for the fixed-stick condition. The period and damping of longitudinal oscillations were determined by direct measurements of oscillations in flight and also by calculation in which the factors that enter the theoretical stabi… more
Date: June 24, 1932
Creator: Soulé, Hartley A. & Wheatley, John B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Compression-ignition engine tests of several fuels

Description: "The tests reported in this paper were made to devise simple engine tests which would rate fuels as to their comparative value and their suitability for the operating conditions of the individual engine on which the tests are made. Three commercial fuels were used in two test engines having combustion chambers with and without effective air flow. Strictly comparative performance tests gave almost identical results for the three fuels. Analysis of indicator cards allowed a differentiation betwee… more
Date: May 1932
Creator: Spanogle, J. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Compressive Strength of Duralumin Columns of Equal Angle Section

Description: "This report presents a chart giving the compressive strength of duralumin columns of equal angle section. The data used in the construction of the chart were obtained from various published sources and were correlated with theory in the range where secondary failure occurred. Appendices are included giving excerpts from Army and Navy specifications for duralumin and approximate formulas for the properties of the equal angle section" (p. 1).
Date: March 1932
Creator: Lundquist, Eugene E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Considerations of air flow in combustion chambers of high-speed compression-ignition engines

Description: The air flow in combustion chambers is divided into three fundamental classes - induced, forced, and residual. A generalized resume is given of the present status of air flow investigations and of the work done at this and other laboratories to determine the direction and velocity of air movement in auxiliary and integral combustion chambers. The effects of air flow on engine performance are mentioned to show that although air flow improves the combustion efficiency, considerable induction, fri… more
Date: April 1932
Creator: Spanogle, J. A. & Moore, C. S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Contributions to the Data on Theoretical Metallurgy: [Part] 1. The Entropies of Inorganic Substances

Description: From Introduction: "The present work is an attempt to collect all the available data referring to one important thermodynamic property and to supply sufficient discussion to make the results readily usable by metallurgists. In the study of chemical or metallurgical reactions two factors have predominant importance-the free energy of reaction and the speed of reaction. The subject of this publication is so closely allied to the former that may be well to consider briefly some of the uses to whic… more
Date: 1932
Creator: Kelley, K. K.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Controls at Low Hinge Moments

Description: A very stable airplane remains very maneuverable when the hinge moments of the controls remain inferior to those obtained with the conventional forms and when the wing lift at high angles has been improved. From this point of view, elevators balanced by recoil of the hinge, and slotted wings present some interesting features. The results of testing with several different types of wings and tail surfaces are provided.
Date: September 1932
Creator: Pris, M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Crater Wells, Richland Gas Field, Louisiana

Description: Technical paper issued by the Bureau of Mines over "the history of the craters in the Richland gas field. The data have been collected at various times over a period of four years. The equipment and methods of control are discussed, and photographs show the surface conditions at various intervals in the life of the craters" (p. 1). This paper includes tables, maps, photographs, and illustrations.
Date: 1932
Creator: Hill, Harry Blackburn
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Crystal Cavities of the New Jersey Zeolite Region

Description: From abstract: The crystal cavities present in the mineral complex of the New Jersey traprock region have long excited the interest of mineralogists. In 1914 Fenner made the first detailed and comprehensive study of these cavities and suggested that babingtonite was the original mineral. Soon after this anhydrite was found occupying parts of some of the cavities at one of the quarries. At this time, too, Wherry concluded that glauberite was the original mineral of some of the cavities because o… more
Date: 1932
Creator: Schaller, Waldemar T.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The D.H. "Fox Moth" Commercial Airplane (British): A Three-Passenger Light Cabin Biplane

Description: Circular describing the D.H. 83 "Fox Moth", which is a three-passenger light cabin biplane that is considered a commercial airplane despite taking many of its components from the company's existing two-seat touring and training light airplanes. A description of these components, design, flight characteristics, performance, drawings, and photographs are provided.
Date: May 1932
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Determination of Stresses and Deformations of Aircraft Propellers

Description: A method is described for testing the strength of propellers of any shape. It is shown that the shape of the propeller greatly affects the stresses, and that great caution must be exercised if the relieving effect of the centrifugal force, which exists in every propeller with a straight blade axis, is to be increased by curving the blade axis. In a numerical example, the calculation is made for a certain revolution speed at which the actual distortion is then measured. The results of the calcul… more
Date: May 1932
Creator: Seewald, Friedrich
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Disintegration of a Liquid Jet

Description: This report presents an experimental determination of the process of disintegration and atomization in its simplest form, and the influence of the physical properties of the liquid to be atomized on the disintegration of the jet. Particular attention was paid to the investigation of the process of atomization.
Date: February 1932
Creator: Haenlein, A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The drag of two streamline bodies as affected by protuberances and appendages

Description: This report presents the results of wind tunnel tests of two airship models conducted to determine the drag coefficients at zero pitch, and the effect of fins and cars and of flat and streamlined protuberances located at various positions along the hull. During the investigation the stern of one model was rounded off to produce a blunter shape. The extreme range of the Reynolds number based on the over-all length of the models was from 1,300,000 to 33,000,000. At large values of the Reynolds nu… more
Date: September 26, 1932
Creator: Abbott, Ira H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Drag Tests of 4/9-Scale Model Engine Nacelles With Various Cowlings

Description: "Results are given of drag tests of 4/9-scale model radial air-cooled engine nacelles made as a part of a general investigation of wing-nacelle-propeller interference. A small nacelle of the type commonly used with exposed engine cylinders was tested with various forms of cowling over the cylinders. The effects of cowling-ring position and of angle of ring chord to the thrust line were investigated. An N.A.C.A. cowled nacelle and a smooth body were also tested. The results are given at 50, 75, … more
Date: October 1932
Creator: Windler, Ray
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Dynamic Testing of Airplane Shock-Absorbing Struts

Description: "Measurement of perpendicular impacts of a landing gear with different shock-absorbing struts against the drum testing stand. Tests were made with pneumatic shock absorbers having various degrees of damping, liquid shock absorbers, steel-spring shock absorbers and rigid struts. Falling tests and rolling tests. Maximum impact and gradual reduction of the impacts in number and time in the falling tests. Maximum impact and number of weaker impacts in rolling tests" (p. 1).
Date: January 1932
Creator: Langer, P. & Thomé, W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Effect of aging on taut rubber diaphragms

Description: As part of an investigation of special compositions of rubber suitable for use as diaphragms for aircraft instruments, six samples were used as taut diaphragms in instruments and allowed to age for five years. Two of the instruments were in operating condition after this period of time and one had remarkably little change in performance. In making the rubber tetraethyl thorium disulfide was employed as a vulcanizing agent.
Date: February 1932
Creator: Strother, D. H. & Henrickson, H. B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The effect of area aspect ratio on the yawing moments of rudders at large angles of pitch on three fuselages

Description: This reports presents the results of measurements made of yawing moments produced by rudder displacement for seven rudders mounted on each of three fuselages at angles of pitch of 0 degree, 8 degrees, 12 degrees, 20 degrees, 30 degrees and 40 degrees. The dimensions of the rudders were selected to cover the range of areas and aspect ratios commonly used, while the ratios of rudder area to fin area and of rudder chord to fin chord were kept approximately constant. An important result of the meas… more
Date: May 16, 1932
Creator: Dryden, Hugh L. & Monish, B. H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Effect of Clearance Distribution on the Performance of a Compression-Ignition Engine with a Precombustion Chamber

Description: "The clearance distribution in a precombustion chamber cylinder head was varied so that for a constant compression ratio of 13.5 the spherical auxiliary chambers contained 20, 35, 50, and 70 per cent of the total clearance volume. Each chamber was connected to the cylinder by a single circular passage, flared at both ends, and of a cross-sectional area proportional to the chamber volume, thereby giving the same calculated air-flow velocity through each passage. Results of engine-performance tes… more
Date: November 1932
Creator: Moore, C. S. & Collins, J. H., Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen