Technical Report Archive & Image Library (TRAIL) - 13,786 Matching Results

Search Results

open access

Abacus Giving the Variation of the Mean Pressure of an Aviation Engine as a Function of its Speed of Rotation

Description: Comparing the results of the calculations for computing the mean pressure of an aviation engine for any number of revolutions, with those of experiment, the writer, by numerous examples, shows the perfect agreement between them. This report will show that, by means of a special abacus, an engineer can instantly plot the characteristics of an engine.
Date: March 1921
Creator: Margoulis, W.
Partner: UNT Libraries Government Documents Department
open access

Ability of Pilots to Control Simulated Short-Period Yawing Oscillations

Description: Report discussing an investigation into the ability of human pilots to control short-period yawing oscillations using a yaw simulating device. The ability to control the oscillations was determined to be a function of period, control effectiveness, and inherent damping. Pilot control effectiveness was found to improve with practice.
Date: November 13, 1950
Creator: Phillips, William H. & Cheatham, Donald C.
Partner: UNT Libraries Government Documents Department
open access

Abnormal grain growth in M-252 and S-816 alloys

Description: Report discussing an experimental investigation was carried out on air- and vacuum-melted M-252 and S-816 alloys to find conditions of heating and hot-working which resulted in abnormal grain growth. The experiments were mainly limited to normal conditions of heating for hot-working and heat treatment and normal temperatures of solution treatment were used to allow grain growth after susceptibility to abnormal grain growth was developed by various experimental conditions. Results indicated that… more
Date: November 1957
Creator: Decker, R. F.; Rush, A. I.; Dano, A. G. & Freeman, J. W.
Partner: UNT Libraries Government Documents Department
open access

Abnormal grain growth in nickel-base heat-resistant alloys

Description: From Introduction: "The data included in this report for Nimonic 80A alloy, for instance, represent experiments carried out to help clarify a production problem of grain-size control in an alloy which has been extensively used. The general procedure of the investigation was to carry out controlled laboratory experiments on samples of bar stock to find conditions of heating and hot-working which resulted in abnormal grain growth."
Date: December 1957
Creator: Decker, R. F.; Rush, A. I.; Dano, A. G. & Freeman, J. W.
Partner: UNT Libraries Government Documents Department
open access

Abnormal Grain Growth in S-816 Alloy

Description: From Introduction: "This report presents the results obtained to date of an investigation to establish the fundamental causes of abnormal growth in S-816 alloy under conditions encountered during the forging of blades for the gas turbine of jet engines."
Date: April 1952
Creator: Rush, A. I.; Freeman, J. W. & White, A. E.
Partner: UNT Libraries Government Documents Department
open access

Absolute Coefficients and the Graphical Representation of Aerofoil Characteristics

Description: It is argued that there should be an agreement as to what conventions to use in determining absolute coefficients used in aeronautics and in how to plot those coefficients. Of particular importance are the absolute coefficients of lift and drag. The author argues for the use of the German method over the kind in common use in the United States and England, and for the Continental over the usual American and British method of graphically representing the characteristics of an airfoil.
Date: June 1921
Creator: Munk, Max
Partner: UNT Libraries Government Documents Department
open access

Absolute Dimensions of Karman Vortex Motion

Description: Note presenting an investigation of the Karman vortex street, which is a flow arrangement occurring behind a plate. The equations governing the flow and some of the hypotheses behind it are provided.
Date: January 1923
Creator: Heisenberg, Werner
Partner: UNT Libraries Government Documents Department
open access

Absorbing landing shocks

Description: Report discussing tires, steel springs, hydraulic shock absorbers, and axle travel are all examined in relation to absorbing landing shocks.
Date: August 1923
Creator: Warner, Edward P.
Partner: UNT Libraries Government Documents Department
open access

Abstracts Pertaining to Seaplanes

Description: Report discussing about 400 references pertaining to the hydrodynamic design of seaplanes have been compiled, and the information is presented in the form of abstracts classified under six main headings.
Date: July 24, 1947
Creator: Bidwell, Jerold M. & King, Douglas A.
Partner: UNT Libraries Government Documents Department
open access

Acceleration Characteristics of a Turbojet Engine With Variable-Position Inlet Guide Vanes

Description: Report presenting a study of the acceleration characteristics of a turbojet engine equipped with variable-position inlet guide vanes in the altitude test chamber. Maximum acceleration values for 3 engines of the same model were also obtained during testing and were found to differ as much as 50 percent. Results regarding the effect of fuel step size and inlet guide vane on acceleration, effect of flight condition, reproducibility of engine acceleration, compressor pressure ratio in relation to … more
Date: July 7, 1955
Creator: Dobson, W. F. & Wallner, Lewis E.
Partner: UNT Libraries Government Documents Department
open access

Acceleration Characteristics of R-3350 Engine Equipped with NACA Injection Impeller

Description: From Summary: "Qualitative investigations have shown that use of the NACA injection impeller with the R-3350 engine increases the inertia of the fuel-injection system and, when the standard fuel-metering system is used, this increase in inertia results in poor engine acceleration characteristics. This investigation was therefore undertaken to determine whether satisfactory acceleration characteristics of the engine equipped with the injection impeller could be obtained by simple modifications t… more
Date: January 8, 1947
Creator: Hickel, Robert O. & Snider, William E.
Partner: UNT Libraries Government Documents Department
open access

Acceleration Measurements During Landing in Rough Water of a 1/7-Scale Dynamic Model of Grumman XJR2F-1 Amphibian - Langley Tank Model 212: TED No. NACA 2378

Description: From Summary: "Tests of a 1/7 size model of the Grumman XJR2F-1 amphibian were made in Langley tank no.1 to examine the landing behavior in rough water and to measure the normal and angular accelerations experienced by the model during these landings. All landings were made normal to the direction of wave advance, a condition assumed to produce the greatest accelerations. Wave heights of 4.4 and 8.0 inches (2.5 and 4.7 ft, full size) were used in the tests and the wave lengths were varied betwe… more
Date: May 6, 1947
Creator: Land, Norman S. & Zeck, Howard
Partner: UNT Libraries Government Documents Department
open access

Acceleration Measurements During Landings of a 1/5.5-Size Dynamic Model of the Columbia XJL-1 Amphibian in Smooth Water and in Waves: Langley Tank Model 208M, TED No. NACA 2336

Description: A 1/5.5-size powered dynamic model of the Columbia XJL-1 amphibian was landed in Langley tank no. 1 in smooth water and in oncoming waves of heights from 2.1 feet to 6.4 feet (full-size) and lengths from 50 feet to 264 feet (full-size). The motions and the vertical accelerations of the model were continuously recorded. The greatest vertical acceleration measured during the smooth-water landings was 3.1g.
Date: September 25, 1947
Creator: Clement, Eugene P. & Havens, Robert F.
Partner: UNT Libraries Government Documents Department
open access

Acceleration of high-pressure-ratio single-spool turbojet engine as determined from component performance characteristics 1: effect of air bleed at compressor outlet

Description: From Summary: "An analytical investigation was made to determine from component performance characteristics the effect of air bleed at the compressor outlet on the acceleration characteristics of a typical high-pressure-ratio single-spool turbojet engine. Consideration of several operating lines on the compressor performance map with two turbine-inlet temperatures showed that for a minimum acceleration time the turbine-inlet temperature should be the maximum allowable, and the operating line on… more
Date: March 10, 1953
Creator: Rebeske, John J., Jr. & Rohlik, Harold E.
Partner: UNT Libraries Government Documents Department
open access

Acceleration of high-pressure-ratio single-spool turbojet engine as determined from component performance characteristics 2: effect of compressor interstage air bleed

Description: Report presenting an analytical investigation to determine the effect of compressor interstage air bleed with the use of constant-area bleed ports on the acceleration characteristics of a typical high-pressure-ratio single-spool turbojet engine. Constant-area interstage bleed, properly located, gave smaller acceleration times than variable-area compressor exit bleed. Results regarding acceleration with interstage bleed, acceleration using constant-area interstage bleed in combination with compr… more
Date: July 3, 1953
Creator: Rebeske, John J., Jr. & Dugan, James F., Jr.
Partner: UNT Libraries Government Documents Department
open access

Acceleration of high-pressure-ratio single-spool turbojet engine as determined from component performance characteristics 3: effect of turbine stator adjustment

Description: From Summary: "An analytical investigation was made to determine from component performance the effect of turbine stator adjustment on the acceleration characteristics of a typical high-pressure-ratio single-spool turbojet engine. Turbine stator adjustment was adequate to permit engine operation in the intermediate-speed range, but was less satisfactory than the relatively simple schemes of compressor-interstage and -outlet bleed."
Date: August 2, 1954
Creator: Rohlik, Harold E. & Rebeske, John J.
Partner: UNT Libraries Government Documents Department
open access

An Acceleration Schedule Control for Accelerating a Turbojet Engine and Its Use With a Speed Control

Description: Memorandum presenting a study of an acceleration-limiting control on a turbojet engine in order to determine its feasibility as an acceleration control. A proportional-plus-integral type of controller was used in the investigation. Results regarding the one-loop control and two-loop control are provided.
Date: May 12, 1958
Creator: Gerus, Theodore F.; Powers, Albert G. & Heppler, Herbert J.
Partner: UNT Libraries Government Documents Department
open access

An Acceleration Schedule Control for Accelerating a Turbojet Engine and Its Use With a Speed Control

Description: Memorandum presenting an acceleration-limiting control used on a turbojet engine to study the feasibility of its use as an acceleration control. A proportional-plus-integral type of controller was used in this investigation. Results regarding one-loop control and two-loop control are provided.
Date: May 12, 1958
Creator: Gerus, Theodore F.; Powers, Albert G. & Heppler, Herbert J.
Partner: UNT Libraries Government Documents Department
open access

Accelerations and bottom pressures measured on a B-24D airplane in a ditching test

Description: From Introduction: "This report presents only that portion of the data from the first ditching which was to be used roughly establish the accelerations experienced by the pilot and the amount of water pressure to which the fuselage structure was subjected during the ditching."
Date: November 1944
Creator: Steiner, Margaret F.
Partner: UNT Libraries Government Documents Department
open access

Accelerations and passenger harness loads measured in full-scale light-airplane crashes

Description: From Introduction: "Light-airplane accident data, compiled by Crash Injury Research of Cornell University Medical College, indicate that human beings have often withstood declarations in excess of those imposed in airplane crashes involving extensive damage to the airplane structure (ref. 1). This study also correlates the extent of damage to the airplane structure with the injury incurred by the occupants during crash accidents."
Date: August 1953
Creator: Eiband, A. Martin; Simpkinson, Scott H. & Black, Dugald O.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen