Technical Report Archive & Image Library (TRAIL) - 12,382 Matching Results

Search Results

open access

"25" Critically Consultation with J. W. Morfitt : April 3, 1950

Description: Summary: "Criticality was considered impossible in any contingency encountered in practice under either of the following conditions which include no safety factor: (a) In any isolated cylinder not more than 5 in. in disruptor, if the total amount of U235 present does not exceed 7.5 Eg. (b) In an isolated vessel of any shape and size, if the total amount of U235 present does not exceed 880 g. An "isolated" vessel is one which does not "see" more than 0.1 [...] other vessels containing fissionabl… more
Date: April 3, 1950
Creator: Merrill, E. T. & Sege, G.
Partner: UNT Libraries Government Documents Department
open access

300-KV Pulser Transformer and Pulser.

Description: Photographs and working drawings are presented for a small (approximately 4.25 X 7 X 9 inch) 300Kv pulse transformer having double-conical secondaries each with a corona ring at its greatest diameter. The pulser circuit is shown but no text is included.
Date: November 1951
Creator: Heller, R. E.
Partner: UNT Libraries Government Documents Department
open access

327 Basin Aluminum Corrosion Test

Description: An investigation of corrosion in the 327 Building's water storage basin was made to determine whether the static storage of aluminum jacketed fuel elements could cause corrosion effects that would interfere with studies of in-pile corrosion.
Date: February 9, 1956
Creator: Mallett, G. R.
Partner: UNT Libraries Government Documents Department
open access

709 Program for Reduction of Exponential Pile Data

Description: A multi-purpose program for processing exponential data has been prepared for the 709 computer. The main purposes of the program is to compute the material buckling from raw data (given counts, time, and counter information) or from previously calculated Athermal's. It is also possible to compute only CeCh (end and harmonic corrections) for a given B11 or series if B11's no counting data being entered. In every case, pile measurements must be submitted as input for corrections.
Date: August 20, 1959
Creator: Matsumoto, D. D.
Partner: UNT Libraries Government Documents Department
open access

1706 KE Water Treatment for Out-of-Reactor Test Facilities.

Description: Water treatment systems for preparing and maintaining high purity water in out-of-reactor or in-reactor test oops are becoming increasingly important. In out0of-reactor experiments the presence of ionic impurities in the water has a marked influence on film formation and corrosion rates. It is therefore , imperative that these impurities be maintained at the lower practical concentration.
Date: March 30, 1959
Creator: Demmitt, Thomas F.
Partner: UNT Libraries Government Documents Department
open access

1706-KER Coolant Test Facility Operations Manual

Description: This procedure is intended to be used as: 1. An instruction and guide for operation of the KER loops. 2. To aid in familiarization and understanding of the general operation of the loops. 3. To prevent lost time due to errors in loop operation. The procedure is not meant to be completely comprehensive in all details of loop operation.
Date: January 23, 1958
Creator: Dulin, R. V.
Partner: UNT Libraries Government Documents Department
open access

1A Reactor Inlet Hydraulic Valve Position Detector Temperature. Section I. Core I, Seed 1. Test Results DL-S-258-S, RNI-3

Description: The purpose of the test was to determine the internal temperature of the valve position detector for the 1A reactor inlet hydraulic valve with the plant at normal pressure and temperature and at power. The normal operating temperatures for the valve position detector on the 1A reactor inlet hydraulic valve range from a minimum of 287 F to a maximum of 294.7 F.
Date: November 20, 1959
Partner: UNT Libraries Government Documents Department
open access

Ability of Pilots to Control Simulated Short-Period Yawing Oscillations

Description: Report discussing an investigation into the ability of human pilots to control short-period yawing oscillations using a yaw simulating device. The ability to control the oscillations was determined to be a function of period, control effectiveness, and inherent damping. Pilot control effectiveness was found to improve with practice.
Date: November 13, 1950
Creator: Phillips, William H. & Cheatham, Donald C.
Partner: UNT Libraries Government Documents Department
open access

Abnormal grain growth in M-252 and S-816 alloys

Description: Report discussing an experimental investigation was carried out on air- and vacuum-melted M-252 and S-816 alloys to find conditions of heating and hot-working which resulted in abnormal grain growth. The experiments were mainly limited to normal conditions of heating for hot-working and heat treatment and normal temperatures of solution treatment were used to allow grain growth after susceptibility to abnormal grain growth was developed by various experimental conditions. Results indicated that… more
Date: November 1957
Creator: Decker, R. F.; Rush, A. I.; Dano, A. G. & Freeman, J. W.
Partner: UNT Libraries Government Documents Department
open access

Abnormal grain growth in nickel-base heat-resistant alloys

Description: From Introduction: "The data included in this report for Nimonic 80A alloy, for instance, represent experiments carried out to help clarify a production problem of grain-size control in an alloy which has been extensively used. The general procedure of the investigation was to carry out controlled laboratory experiments on samples of bar stock to find conditions of heating and hot-working which resulted in abnormal grain growth."
Date: December 1957
Creator: Decker, R. F.; Rush, A. I.; Dano, A. G. & Freeman, J. W.
Partner: UNT Libraries Government Documents Department
open access

Abnormal Grain Growth in S-816 Alloy

Description: From Introduction: "This report presents the results obtained to date of an investigation to establish the fundamental causes of abnormal growth in S-816 alloy under conditions encountered during the forging of blades for the gas turbine of jet engines."
Date: April 1952
Creator: Rush, A. I.; Freeman, J. W. & White, A. E.
Partner: UNT Libraries Government Documents Department
open access

An Abrasive Cutoff Machine for Metallurgical Research on Radioactive Materials

Description: An abrasive cutoff machine design, based upon a previous model, (1) was undertaken to provide for the sampling of radioactive material. the design objective was; first, to provide samples for metallographic examination, second, to provide samples for physical and mechanical property testing, and, third, to meet the following design requirements: 1. Remote operation. 2. Airborne contamination control. 3. Radioactive waste collection. 4. Remote maintenance.
Date: January 5, 1957
Creator: Boyd, C. L.
Partner: UNT Libraries Government Documents Department
open access

Abrasive Cutting of Irradiated Uranium

Description: The preparation of radioactive metallurgical specimens for microscopic examination is one of the responsibilities of the Radiometallurgy Sub-Unit. An abrasive cut-off machine development program, based upon a previous experimental model, was undertaken to provide a method for sectioning of irradiated materials without undue personnel exposure or spread of contamination and finally to provide data for the design of an abrasive cutting unit for use in the work cells in the Radiometallurgy Buildin… more
Date: September 17, 1953
Creator: Boyd, Carl L.
Partner: UNT Libraries Government Documents Department
open access

Absolute Cross Sections of the Reaction P + P - w+ + d

Description: Absolute differential cross sections for the reaction p + p - w+ + d were obtained by detecting meson-deuteron coincidences produced by passing the 340-Mev external proton beam of the Berkeley synchro-cyclotron through a liquid hydrogen target.
Date: April 23, 1953
Creator: Crawford, Frank Stevens, Jr.
Partner: UNT Libraries Government Documents Department
open access

The Absorption and Translocation of Several Fission Elements by Russian Thistle

Description: Abstract: An investigation was conducted to determine the absorption and translocation of fission products by Russian thistle from a localized spot of contaminated soil. The amount and identity of the radioactive elements absorbed and translocated by the Russian thistle is given along with the location of these elements in the plants. Beta radioactivity to the amounts of 10 microcuries per gram caused no visible effects on the growth habits of sectioned material are included.
Date: June 8, 1950
Creator: Selders, A. A.
Partner: UNT Libraries Government Documents Department
open access

Absorption by Soil of Strontium From 216-S Crib Waste

Description: A preliminary soil column experiment with a waste sample from the 207-S-11 well, which monitors the 216-S cribs, indicated that cesium was absorbed almost completely by the soil but that strontium breakthrough to ground water in the near future seemed likely. Accordingly, it was suggested that the 216-S wastes be discharged to a new disposal site, and that samples of the wastes which are currently being discharged to the 216-S cribs be obtained for soil absorption tests. The primary purpose of … more
Date: February 15, 1956
Creator: Rhodes, D. W.
Partner: UNT Libraries Government Documents Department
open access

Absorption Characteristics of Long Soil Columns

Description: The purpose of this report is to present the information obtained relative to the characteristic adsorption of radioisotopes in a long (forty feet) laboratory soil column treated with a high salt, process waste of high activity density. The movement of adsorbed cations in a soil column subjected to prolonged leeching by water also was determined.
Date: May 1, 1955
Creator: McHenry, J. R.
Partner: UNT Libraries Government Documents Department
open access

Absorption of Organic Acids on Thoria

Description: The adsorption of acetic and oleic acids on the surface of thoria was studied by means of infrared spectroscopy. An infrared analysis of the adsorbates before and after adsorption using differential double bean methods indicated that the adsorption of organic acids on thoria surfaces occurs by an esterification reaction between the organic acid and the hydroxylated thoria surface. Ammonia vapor will not adsorb on thoria, indicated the basic character of the hydroxylated surface.
Date: December 31, 1959
Creator: Bradford, Harold R. & Wadsworth, Milton E.
Partner: UNT Libraries Government Documents Department
open access

Absorption of Radionuclides Applied to Above Ground Plant Parts : Terminal Report

Description: The attached list of publications is submitted as a year to year and final report of progress on work accomplished under Contract AT(11-1)-159 from 1950 to 1959. Work was initiated on this project in the spring of 1950 and is still in progress as of the date of this report.
Date: 1959
Creator: Wittwer, S. H. (Sylvan Harold), 1917-2012; Turkey, H. G. & Bukovac, M. J.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen