Search Results

open access

Aerodynamic Characteristics of Four NACA Airfoil Sections Designed for Helicopter Rotor Blades

Description: "The purpose of the present work is to extend the previous investigation and to derive additional airfoil sections designed to minimize the undesirable characteristics of the previously tested airfoils. The tests of these additional airfoils were made in the Langley two-dimensional low-turbulence tunnel (LTT)" (p. 2).
Date: February 1946
Creator: Stivers, Louis S., Jr. & Rice, Fred J., Jr.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Characteristics of Several Modifications of a 0.45-Scale Model of the Vertical Tail of the Curtiss XP-62 Airplane

Description: "In the course of an investigation to find a satisfactory vertical tail for the XP-62 airplane, a 0.45-scale vertical tail model on a stub fuselage was tested in the Langley 7- by 10-foot tunnel. This model was fitted with a flat plate to represent the horizontal tail surface. The data are presented herein for their general interest value rather than their application to this particular airplane" (p. 1).
Date: July 1946
Creator: Lowry, John G.; Turner, Thomas R. & Liddell, Robert B.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Data for a Wing Section of the Republic XF-12 Airplane Equipped With a Double Slotted Flap

Description: Report presenting an investigation in the two-dimensional low-turbulence tunnels for the purpose of developing an optimum flap configuration for maximum lift on an airfoil section for the Republic XF-12 airplane equipped with a double slotted flap. Lift and flap loads were obtained at several flap deflections for two flap paths. Results regarding lift, drag, and flap loads are provided.
Date: January 1946
Creator: Cahill, Jones F.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamics of the carburetor air scoop and the engine cowling of a single-engine torpedo-bomber-type airplane

Description: From Introduction: "An investigation of the power-plant installation of a single-engine torpedo-bomber-type airplane has been conducted in the NACA Cleveland altitude wind tunnel at the request of the Bureau of Aeronautics, Navy Department. A similar investigation was previously conducted on a three-tenths scale mock-up of the forward portion of the fuselage of this airplane in the Langley 20-foot tunnel. (See reference 1)."
Date: June 1946
Creator: Palter, Herman
Partner: UNT Libraries Government Documents Department
open access

Air-Flow and Performance Characteristics of Engine-Stage Supercharger of a Double-Row Radial Aircraft Engine 2: Effect of Design Variables

Description: Report presenting an investigation to determine the effect of the location of the diffuser vanes with respect to the supercharger outlets and the effect of flow conditions at the impeller inlet on the air-flow distribution in the outlets of the engine-stage supercharger of an 18-cylinder double-row radial aircraft engine. The effect of flow conditions at the impeller inlet was investigated by distorting the flow at the inlet and noting the effect in the supercharger outlets. Results regarding t… more
Date: August 1946
Creator: Baas, Edmund J. & Dugan, Paul D.
Partner: UNT Libraries Government Documents Department
open access

Airscrew Gyroscopic Moments

Description: "When flying in a turn or pulling out of a dive, the airscrew exerts a gyroscopic moment on the aircraft, In the case of airscrews with three or more blades, arranged symmetrically, the value of the gyroscopic moment is J(sub x) omega(sub x) omega(sub y), where J(sub x) denotes the axial moment of inertia about the axis of rotation of the airscrew, omega(sub x) the angular upeed of the airscrew about its axis, and omega (sub Y) the rotary speed of the whole aircraft about an axis parallel to th… more
Date: September 1946
Creator: Bock, G.
Partner: UNT Libraries Government Documents Department
open access

Alpha Particle Detection and the A. C. Operated Detector "A" (Howler)

Description: Abstract: This discussion concerns the operation, construction, and servicing of an alpha rate meter of medium sensitivity (30,000 alpha particles full scale per minute) and good stability. The instrument is equipped with an oscillator which increases both in frequency and loudness as the alpha activity is increased. The oscillator circuit includes an anticipator which causes a change in frequency depending directly upon the rate of change of alpha activity. Maximum sensitivity is approximately… more
Date: January 29, 1946
Creator: Neil, Hugh G.
Partner: UNT Libraries Government Documents Department
open access

Altitude cooling investigation of the R-2800-21 engine in the P-47G airplane 2: investigation of the engine & airplane variables affecting the cylinder temperature distribution

Description: "The data obtained from cooling tests of an R-2800-21 engine installed in a P-47G airplane were studied to determine which engine and airplane operation variables were mainly responsible for the extremely uneven temperature distribution among the 18 engine cylinders obtained at the medium and high engine-power conditions. The tests consisted of flights at altitudes from 5000 to 35,000 feet for the normal range of engine and airplane operation. The results of the study showed that a flow conditi… more
Date: October 9, 1946
Creator: Pesman, Gerard J. & Kaufman, Samuel J.
Partner: UNT Libraries Government Documents Department
open access

Altitude cooling investigation of the R-2800-21 engine in the P-47g airplane 3: individual-cylinder temperature reduction by means of intake-pipe throttle and by coolant injection

Description: "Flight tests were conducted on a R-2800-21 engine in the P-47G airplane to determine the effect on the wall temperatures of cylinder 10 of throttling the charge in the intake pipe and of injecting a water-ethanol coolant into the intake pipe. Cylinder 10 was chosen for this investigation because it runs abnormally hot (head temperatures of the order of 45 F higher than those of the next hottest cylinder) at the medium and high-power conditions. Tests with interchanged cylinders showed that the… more
Date: October 9, 1946
Creator: Bell, E. Barton; Valerino, Michael F. & Manganiello, Eugene J.
Partner: UNT Libraries Government Documents Department
open access

Altitude-Wind-Tunnel Investigation of Oil-System Performance of XR-4360-8 Engine in XTB2D-1 Airplane

Description: "An investigation was conducted in the Cleveland altitude wind tunnel to determine the aerodynamic characteristics and the oil delivery critical altitude of the oil-cooler installation of an XTB2D-1 airplane. The investigation was made with the propeller removed end with the engine operating at 1800 brake horsepower, an altitude of 15,000 feet (except for tests of oil-delivery critical altitude), oil-cooler flap deflections from -20 degrees to 20 degrees and inclinations of the thrust axis of 0… more
Date: October 11, 1946
Creator: Conrad, E. William
Partner: UNT Libraries Government Documents Department
open access

Altitude-Wind-Tunnel Investigation of Performance of Several Propellers on YP-47M Airplane at High Blade Loading, 1, Aeroproducts H20C-162-X11M2 Four-Blade Propeller

Description: "An investigation was made in the Cleveland Altitude wind tunnel to determine the performance of an Aeroproducts H20C-162-X11M2 four-blade propeller on a YP-47M airplane at high blade loadings and high engine powers. The propeller characteristics were obtained for a range of power coefficients from 0.30 to 1.00 at free-stream Mach numbers of 0.40 and 0.50. The results of the force measurements are indicative only of trends in propeller efficiency with changes in power coefficient and advance-di… more
Date: October 11, 1946
Creator: Saari, Martin J. & Wallner, Lewis E.
Partner: UNT Libraries Government Documents Department
open access

Altitude-Wind-Tunnel Investigation of Performance of Several Propellers on YP-47M Airplane at High Blade Loading 2 - Curtiss 838-1C2-18R1 Four-Blade Propeller

Description: "An investigation was conducted in the Cleveland altitude wind tunnel to determine the performance of a Curtiss propeller with four 838-1C2-1SR1 blades on a YP-47M airplane at high blade loadings and engine powers. The study was made for a range of power coefficients between 0.30 and 1.00 at free-stream Mach numbers of 0.40 and 0.50. The results of the force measurements indicate primarily the trend of propeller efficiency for changes in power coefficient or advance-diameter ratio, inasmuch as … more
Date: November 26, 1946
Creator: Wallner, Lewis E. & Sorin, Solomon M.
Partner: UNT Libraries Government Documents Department
open access

Altitude-Wind-Tunnel Investigation of Performance of Several Propellers on YP-47M Airplane at High Blade Loadings 4 - Curtiss 732-1C2-0 Four-Blade Propeller

Description: "An altitude-wind-tunnel investigation has been made to determine the performance of a Curtiss 732-1C2-0 four-blade propeller on a YP-47M airplane at high blade loadings and engine power. Propeller characteristics were obtained for a range of power coefficients from 0.30 to 1.00 at free-stream Mach numbers of 0.40 and .50" (p. 1).
Date: November 26, 1946
Creator: Saari, Martin J. & Sorin, Solomon M.
Partner: UNT Libraries Government Documents Department
open access

Altitude-Wind-Tunnel Investigation of Performance of Several Propellers on YP-47M Airplane at High Blade Loadings 5 - Curtiss 836-14C2-18R1 Four-Blade Propeller

Description: An investigation of the performance of several propellers on the YP-47M airplane at high blade loadings has been conducted in the Cleveland altitude wind tunnel at the request of the Air Materiel Command, Army Air Forces. As part of the program, a study was made of a Curtiss 836-14C2-18R1 four-blade propeller. The investigation was made for a range of power coefficients from 0.10 to 1.00 at free-stream Mach numbers of 0.30, 0.40, and 0.50 for density altitudes from 10,000 to 45,000 feet, engine… more
Date: December 2, 1946
Creator: Saari, Martin J. & Wallner, Lewis E.
Partner: UNT Libraries Government Documents Department
open access

Altitude-Wind-Tunnel Investigation of Performance of Several Propellers on YP-47M Airplane at High Blade Loadings 6 - Hamilton Standard 6507A-2 Four- and Three-Blade Propellers

Description: "An altitude-wind-tunnel investigation has been made to determine the performance of Hamilton Standard 6507A-2 four-blade and three-blade propellers on a YP-47M airplane at high blade loadings and high engine powers. Characteristics of the four-blase propeller were obtained for a range of power coefficients from 0.10 to 1.00 at free-stream Mach numbers of 0.20, 0.30, 0.40. Characteristics of the three-blade propeller were obtained for a range of power coefficients from 0.30 to 1.00 at a free-st… more
Date: December 19, 1946
Creator: Saari, Martin J. & Sorin, Solomon M.
Partner: UNT Libraries Government Documents Department
open access

Altitude-wind-tunnel investigations of thrust augmentation of a turbojet engine 1: Performance with tail-pipe burning

Description: From Introduction: "Performance results of the tail-pipe burning investigation on the TG-180 turbojet engine and a comparison of experimental results with theoretical calculations are presented."
Date: September 25, 1946
Creator: Fleming, W. A. & Dietz, R. O.
Partner: UNT Libraries Government Documents Department
open access

Altitude-wind-tunnel tests of power-plant installation in jet-propelled fighter

Description: From Introduction: "The research program included clean-up tests (unpublished data) and stability and control tests (reference 1) made in the NACA Langley full-scale tunnel. An investigation of the aerodynamic characteristics of the power-plant installation in the Cleveland altitude wind tunnel is discussed in this report."
Date: February 1946
Creator: Preston, G. Merritt; Black, Fred O., Jr. & Jagger, James M.
Partner: UNT Libraries Government Documents Department
open access

Analyses of Alaska Coals

Description: Report issued by the Bureau of Mines discussing the coal fields of Alaska. Analyses of the Alaskan coal fields are presented in detail. This report includes tables, and a map.
Date: 1946
Creator: Gates, George O. & Fieldner, Arno Carl
Partner: UNT Libraries Government Documents Department
open access

Analysis of Available Data on the Effects of Tabs on Control-Surface Hinge Moments

Description: From Introduction: "A collection balanced-aileron test data is given in reference 1. Reference 2 presents a collection of data applicable to the design of tail surfaces. The results of analyses of data for control surfaces with internal balances, plain-overhang and Frise balances, beveled trailing edges, and unshielded horn balances have already been published in references 3 to 6."
Date: May 1946
Creator: Crandall, Stewart M. & Murray, Harry E.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen