Search Results

open access

Analysis of Tentative Seismic Design Provisions for Buildings

Description: Report issued by the U.S. National Bureau of Standards discussing an analysis of seismic design provisions for buildings with three main objectives. As stated in the introduction, "The first objective was to assist the ATC in the preparation of its report. The second objective of the study was to augment the text of the published Provisions by providing a formal, consistent documentation of the text. The third objective was to provide alternate arrangements of the Provisions that would make the… more
Date: July 1979
Creator: Harris, James Robert; Fenves, Steven J. & Wright, Richard N.
Partner: UNT Libraries Government Documents Department
open access

Automated Measurement of Frequency Response of Frequency-Modulated Generators Using the Bessel Null Method

Description: From abstract: This paper describes a Bessel null technique to measure the frequency response of a frequency-modulated rf carrier and a program to automate frequency response measurements of signal generators with output frequencies from 0.450 to 2000 MHz. The measurements obtained using this technique are more precise than those obtained by a highly trained technician using a manual system.
Date: March 1986
Creator: Major, J. R.; Livingston, E. M. & Adair, Robert T.
Partner: UNT Libraries Government Documents Department
open access

Basic Tables for Chemical Analysis

Description: Abstract: Tables of important data for use in the analytical chemistry laboratory are provided. These tables contain information for use in gas chromatography, liquid chromatography, infrared and ultraviolet spectrophotometry, mass spectrometry, and wet chemical techniques. Tables relating to safe practice in the analytical laboratory are also included.
Date: April 1986
Creator: Bruno, Thomas J. & Svoronos, Paris D. N.
Partner: UNT Libraries Government Documents Department
open access

Beam-Profile Measurement of Laser Pulses Using a Spatial Filter to Sample the Hermite Modes of a String of Pulses

Description: Abstract: As a first step in the development of a beam-profile measuring instrument for laser sources that is capable of determining the distribution of low-order (less than 25) Hermitian modes in a series of laser pulses, I designed and evaluated the three key parts of such an instrument. First, there is the telescope system which allows the incident laser beam to be phase, beamwidth, and beam center matched to the optical spatial filter. Second, there is a brief error analysis of the structur… more
Date: September 1982
Creator: Johnson, Eric Gunnar, Jr.
Partner: UNT Libraries Government Documents Department
open access

The Characteristics of Iris-Fed Millimeterwave Rectangular Microstrip Patch Antennas

Description: From introduction: The fabrication of various iris-fed millimeterwave rectangular microstrip patch antennas is described. A model is proposed to describe the iris-fed antenna. Irises ranging in size from 15 percent of the area of the patch to the fully open waveguide are used to couple energy into the antenna. Resonance of the antenna is observed to be insensitive to the size of the iris for irises up to 115 percent of the size of the patch. A study is also made of th? relationship of coupling … more
Date: October 1983
Creator: Greenlee, D. H.; Kanda, Motohisa & Chang, David C.
Partner: UNT Libraries Government Documents Department
open access

The Characterization of Optical Fiber Waveguides: A Bibliography with Abstracts, 1970-1980

Description: Abstract: This bibliography contains approximately 450 citations of papers concerning the characterization of optical fiber waveguides. Papers from scientific journals, trade journals and conferences are included along with book chapters. The citations of organized by parameter measured and measurement method. Where published abstracts are available they are included.
Date: June 1981
Creator: Day, G. W.
Partner: UNT Libraries Government Documents Department
open access

A Coaxial Noise Standard for the 1 GHz to 12.4 GHz Frequency Range

Description: From introduction: This note describes the design and construction of a coaxial thermal noise standard. The standard is designed to operate at the boiling point of liquid nitrogen with a noise temperature accurate to t 1 K in the frequency range from 1 GHz to 12.4 GHz.
Date: 1984
Creator: Daywitt, William C.
Partner: UNT Libraries Government Documents Department
open access

Construction of a Large Transverse Electromagnetic Cell

Description: Report issued by the U.S. National Bureau of Standards discussing the construction of large electromagnetic cells. As stated in the introduction, "this instruction provides information and procedures necessary to fabricate a large transverse electromagnetic (TEM) cell to be used for experimental "electromagnetic interference" (EMI) evaluation studies" (p. 1). This report includes illustrations, and photographs.
Date: February 1979
Creator: Decker, W. F. & Wilson, W. A.
Partner: UNT Libraries Government Documents Department
open access

Cryogenic Fluids Density Reference System: Provisional Accuracy Statement (1980)

Description: Abstract: The improved Density Reference System, the reference densimeter, and the method of determining sample density are described. The uncertainty of the density reference system is + 0.055%. The contribution from the estimated systema -ic error in density was + 0.022%. The estimated uncertainty caused by random error is three times the standard deviation of 0.011% and is based on sixty-three measurements of the densities of saturated liquid methane. The total density uncertainty is taken t… more
Date: April 1981
Creator: Siegwarth, J. D. & LaBrecque, J. F.
Partner: UNT Libraries Government Documents Department
open access

Design and Error Analysis for the WR10 Thermal Noise Standard

Description: From introduction: This note describes the design and error analysis of a WR10 thermal noise power standard. The standard is designed to operate at the boiling point of liquid nitrogen with a noise temperature accurate to plus or minus 1 K.
Date: December 1983
Creator: Daywitt, William C.
Partner: UNT Libraries Government Documents Department
open access

Design, Evaluation, and Use of a Reverberation Chamber for Performing Electromagnetic Susceptibility/Vulnerability Measurements

Description: Abstract: This report presents the results of work at the National Bureau of Standards, Boulder, Colorado, to carefully evaluate, document, develop (when necessary), and describe the methodology for performing radiated susceptibility/vulnerability measurements using a reverberation chamber. The report describes the reverberation chamber theory of operation, construction, evaluation, functional operation, and use for performing immunity measurements. It includes an estimate of measurement uncert… more
Date: April 1986
Creator: Crawford, M. L. & Koepke, Galen H.
Partner: UNT Libraries Government Documents Department
open access

Design for a Variable-Output-Coupling Far-Infrared Michelson Laser

Description: Technique for varying the coupling of power from far-infrared gas lasers and the design and construction of these lasers.
Date: January 1971
Creator: Wells, J. S.; Evenson, K. M.; Matarrese, L. M.; Jennings, D. A. & Wichman, G. L.
Partner: UNT Libraries Government Documents Department
open access

Design of the National Bureau of Standards Isotropic Magnetic Field Meter (MFM-10) 300 kHz to 100 MHz

Description: From introduction: In this report the following will he discussed: (1) design consideration of the broadband magnetic field sensor, (2) overall design of the magnetic field meter, (3) performance of the meter, (4) calibration and operating procedures, (5) alignment and adjustment procedures, and (6) summary and conclusions.
Date: October 1985
Creator: Cruz, J. E.; Driver, L. D. & Kanda, Motohisa
Partner: UNT Libraries Government Documents Department
open access

Direct Measurement of the Electric Field of a Laser Pulse--Theory

Description: From abstract: This paper presents the conflicts in the design and gives a solution. The complete evaluation requires assembly of the proposed apparatus to assess final accuracy.
Date: August 1985
Creator: Johnson, Eric Gunnar, Jr.
Partner: UNT Libraries Government Documents Department
open access

An Electric and Magnetic Field Sensor for Simultaneous Electromagnetic Near-Field Measurements -- Theory

Description: Abstract: This paper describes the theory of a single sensor to perform simultaneous electric and magnetic near-field measurements. The theory indicates that it is possible to obtain the magnetic-loop and electric-dipole currents using a loop terminated with identical loads at diametrically opposite points. The theory also indicates that it is possible to obtain an ideal load impedance for achieving equal electric and magnetic field responses of the loop. Preliminary experiments have been perfo… more
Date: April 1983
Creator: Kanda, Motohisa
Partner: UNT Libraries Government Documents Department
open access

Electrical Properties of Materials and Their Measurement at Low Temperatures

Description: Abstract: A review is given of the electrical resistance of materials at cryogenic temperatures. Measurement techniques, the data base, and uses of the data are presented. The emphasis is on metals and alloys of technological importance; a toxic which covers a large range of materials. Similarly, the treatment of theory and of measurement techniques is primarily for the user interested in the more practical aspects of the subject. In every instance, however, references are given which allow the… more
Date: March 1982
Creator: Fickett, F. R.
Partner: UNT Libraries Government Documents Department
open access

Electromagnetic-Acoustic-Transducer/Synthetic-Aperture System for Thick-Weld Inspection

Description: Abstract: This report describes a system based on electromagnetic-acoustic transducers (EMATs) as an approach to automated nondestructive evaluation of thick weldments (>25 mm). Good signal-to-noise ratios, often a problem with EMATs, were possibTe through careful design of the transducers and associated electronic circuits and the use of signal averaging. At 454 kHz, the transducers produce shear-horizontal waves of approximately 7-mm wavelength in steel. The long wavelength permits determinat… more
Date: 1984
Creator: Fortunko, C. M.; Schramm, R. E.; Moulder, J. C. & McColskey, J. D.
Partner: UNT Libraries Government Documents Department
open access

Electromagnetic Compatibility and Interference Metrology

Description: From abstract: The material included in this report is intended for a short course on electromagnetic compatibility/interference (EMC/EMI) metrology to be offered jointly by the staff of the Fields Characterization Group (723.03) and the Interference Characterization Group (723.04) of the Electromagnetic Fields Division (723). The purpose of this short course is to present a review of some of the radiated EMC/EMI measurement methods, to which the National Bureau of Standards (NBS) at Boulder, C… more
Date: July 1986
Creator: Ma, Mark T. & Kanda, M.
Partner: UNT Libraries Government Documents Department
open access

An Equation of State for Fluid Ethylene

Description: Abstract: A thermodynamic property formulation for ethylene, developed as a part of a joint industry-government project, is presented. The formulation includes an equation of state, vapor pressure equation, and equation for the ideal gas heat capacity. The coefficients were determined by a least squares fit of selected experimental data. Comparisons of property values calculated using the equation of state with measured values are given. The equation of state is not valid in the critical region… more
Date: July 1981
Creator: McCarty, Robert D. & Jacobsen, Richard T.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen