Search Results

open access

Static Tests of Corrosion Inhibitors for Aluminum and Carbon Steel

Description: The experiments described in this report were performed for two purposes: (1) to find a chemical, or combination of chemicals, that would be effective for inhibiting corrosion of steel in static portions of the Hanford water systems, and (2) as screening tests to select candidate mixtures for further testing to replace sodium dichromate as the inhibitor of aluminum and steel corrosion in the Hanford single-pass reactor cooling water.
Date: February 1965
Creator: Richman, R. B.
Partner: UNT Libraries Government Documents Department
open access

Geophysical Seismic Evaluation Study at Hanford

Description: From introduction: "In June, 1963, a geophysical research program was conducted at Hanford to determine the feasibility and desirability of using seismic methods in geohydrologic studies. Detection and delineation were desired of seven different geological features that in some sites affect the movement of liquid radioactive wastes discharged to the ground."
Date: December 1964
Creator: Brown, Ruth E. & Raymond, John R.
Partner: UNT Libraries Government Documents Department
open access

PRTR second generation shim assembly

Description: From introduction: "This document discusses the design, fabrication, assembly, and testing of a second generation shim rod assembly, and testing of a second generation shim rod assembly prototype for use in the Plutonium Recycle Test Reactor."
Date: November 1964
Creator: Rasmussen, D. E.
Partner: UNT Libraries Government Documents Department
open access

Grain Refinement of the As-Cast Uranium-5 w/o Chromium Alloy by Ternary Additions

Description: Abstract: "Refinement of grain size of the base uranium-chromium eutectic alloy (uranium-5 w/o chromium) by ternary additions is discussed. Thirteen additions to the base alloy were investigated, and three additions were found to exhibit worthwhile grain-refinement tendencies. The three alloys, uranium-5 w/o chromium-0.2 w.o molybdenum, uranium-5 w/o chromium-0.2 w/o germanium, and uranium-5 w/o chromium-0.2 w/o niobium, were heat treated to produce final grain-size structures of between 0.015 … more
Date: July 5, 1955
Creator: Saller, Henry A.; Dickerson, Ronald F.; Murr, William E. & Bauer, Arthur A.
Partner: UNT Libraries Government Documents Department
open access

Ceramic Investigations of UO₂

Description: This report covers the progress made on an intensive program to develop and evaluate UO2 as a possible fuel element for the PWR.
Date: June 16, 1955
Creator: Allison, Adrian G. & Duckworth, Winston H.
Partner: UNT Libraries Government Documents Department
open access

Evaluation and Consolidation of Electrolytic Thorium

Description: Abstract: "Sound, fabricable ingots of thorium were produced by triple are melting of electrolytic thorium. Consumable electrodes were fabricated by tack welding of cold-pressed and vacuum-sintered bars of the granular thorium electrodeposited from a molten-salt bath. The hydrogen content of the electrodeposited material was reduced from 80 to 4 ppm by vacuum sintering at 1250 C at pressures below 1 x 10-(-3) mm of mercury. Both sodium and chlorine content were reduced during melting; sodium fr… more
Date: June 15, 1955
Creator: Saller, Henry A.; Dickerson, Ronald F. & Foster, Ellis L.
Partner: UNT Libraries Government Documents Department
open access

Electroplated Metals on Uranium for Aluminum Cladding

Description: Abstract: "Aluminum-clad nickel-plated uranium is corrosion resistant in boiling water. Samples with intentional defects in the aluminum-nickel clodding layers, after testing for more than 300 hr. showed no sign of rapid failure. The study of electroplated metals on uranium for aluminum cladding has defined the effects of several processing variables on the corrosion resistance. The quality of the uranium and the quality of the aluminum-nickel bond were important. Heat treatment and vacuum outg… more
Date: May 4, 1955
Creator: Beach, John G.; Schickner, William C.; Hopkinson, Dolores. & Faust, Charles L.
Partner: UNT Libraries Government Documents Department
open access

Extrusion Cladding of Fuel Element

Description: From introduction: "This investigation was undertaken with the general objective of determining whether uranium core could be sheathed with aluminum by an extrusion-cladding process. The ultimate objective of this work was to determine the feasibility of extrusion cladding flat plates of uranium."
Date: March 22, 1955
Creator: Slunder, C. J.; Fiorentino, R. J. & Hall, A. M.
Partner: UNT Libraries Government Documents Department
open access

The Properties and Heat Treatment of Zirconium-Uranium Alloys

Description: From Abstract: "The heat treatment and mechanical properties of four zirconium alloys...were investigated. Tensile, hardness, Jominy end-quench, and metallographic data constitute the basis for much of the report. Other data reported include the results of high-temperature creep, tensile, hardness, cold rolling, thermal-cycling, and dynamic-modulus tests." A connection is made between the behavior of these four alloys and more alloys in the zirconium-uranium system.
Date: January 10, 1955
Creator: Chubb, Walston; Muehlenkamp, G. T. & Manning, G. K.
Partner: UNT Libraries Government Documents Department
open access

The Effects of Chemical Impurities on the Quality of Rolled Uranium Rod

Description: Abstract: "Thirty-four uranium ingots containing controlled amounts of carbon, nitrogen, and Mgl2 slag were cast, rolled, and examined to investigate the relation between these impurities and the quality of the rolled rod. Carbon in concentrations up to 1400 ppm and nitrogen up to 170 ppm, either singly or in combination, had no significant effect on the number of defects observed in the rolled rod. The quality of the rods, however decreased with increasing amount of slag necessary to cause obs… more
Date: October 1, 1954
Creator: Saller, Henry A.; Keeler, J. R. & Cuddy, L. J.
Partner: UNT Libraries Government Documents Department
open access

The Fabrication of Subassemblies for the Supercritical-Water Reactor

Description: In studies of the fabrication of fuel subassemblies for the supercritical-water reactor, the limited ductility of stainless steel-UO₂ fuel sheet made the fabrication of corrugated-flat-plate-type subassemblies impractical. A fabricable MTR-type assembly, 5/8 in. square and 30 in. long, was developed. Methods for edge cladding fuel sheet were developed and a brazing alloy, GE-75, was found to be corrosion resistant in supercritical water.
Date: August 16, 1954
Creator: Keeler, J. R. & Hare, Alan W.
Partner: UNT Libraries Government Documents Department
open access

Uranium Migration in UO₂-Bearing Ceramics

Description: This report follows a preliminary study on uranium migration in pressed and sintered UO2-bearing bodies based on MoSi2 or Al2O3.
Date: September 4, 1953
Creator: Quirk, J. F.; Smalley, A. K.; Duckworth, W. H. & Ferrell, Edward Francis.
Partner: UNT Libraries Government Documents Department
open access

The Ductility of Brazed Stainless Steel Joints

Description: Abstract: "The ductility of Type 310 stainless steel T-joints brazed with GE-62 brazing alloy was measured at room temperatures 1200, 1650, and 1800 F. The measure of ductility was taken as the plastic axial strain required to crack braze fillets in T-section tensile specimens. At elevated temperatures, the ductility of as-brazed joints approximated that of the stainless steel, but at room temperature the brazed joints had only one-tenth the ductility of the base metal. Annealing for 16 hr at 1… more
Date: July 8, 1953
Creator: Saller, Henry A.; Stacy, J. T. & Eddy, N. S.
Partner: UNT Libraries Government Documents Department
open access

Mechanical Properties of Zirconium and Zirconium-Uranium Alloys Containing Tin

Description: Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."
Date: September 29, 1952
Creator: Schwope, A. D.; Muehlenkamp, G. T. & Chubb, Walston
Partner: UNT Libraries Government Documents Department
open access

Mechanical Properties of Zirconium and Zirconium-Uranium Alloys Containing Tin

Description: Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."
Date: September 29, 1952
Creator: Schwope, A. D.; Muehlenkamp, G. T. & Chubb, Walston
Partner: UNT Libraries Government Documents Department
Back to Top of Screen