Technical Report Archive & Image Library (TRAIL) - 99 Matching Results

Search Results

Results: 1 - 24 next
open access

A balanced diaphragm type of maximum cylinder pressure indicator

Description: A balanced diaphragm type of maximum cylinder pressure indicator was designed to give results consistent with engine operating conditions. The apparatus consists of a pressure element, a source of controlled high pressure and a neon lamp circuit. The pressure element, which is very compact, permits location of the diaphragm within 1/8 inch of the combustion chamber walls without water cooling. The neon lamp circuit used for indicating contact between the diaphragm and support facilitates the us… more
Date: December 1930
Creator: Spanogle, J. A. & Collins, John H., Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

English Airplane Construction

Description: English airplane construction is presented with a particular emphasis on metal construction techniques. Steel rib and fuselage construction are discussed as well as the use of duralumin in construction.
Date: December 1930
Creator: Schwencke, D.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Experiments with a model water tunnel

Description: This report describes a model water tunnel built in 1928 by the NACA to investigate the possibility of using water tunnels for aerodynamic investigations at large scales. The model tunnel is similar to an open-throat wind tunnel, but uses water for the working fluid.
Date: December 1930
Creator: Jacobs, Eastman N. & Abbott, Ira H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Riveting in Metal Airplane Construction Part 1 : Riveting Methods and Equipment in German Metal Airplane Construction

Description: "Although all constructors in Germany use duralumin quite frequently, and prefer cold riveting exclusively for permanent (nondetachable) connections of individual structural components, their methods and equipment are very diversified. The differences are due to a great extent to the diversity of structural types and to the special shapes of the individual subassemblies. The results is that different manufacturers have developed totally different riveting methods, as well as entirely different … more
Date: December 1930
Creator: Pleines, Wilhelm
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Riveting in Metal Airplane Construction Part 2: Riveting Methods and Equipment (Concluded), Strength of Riveted Joints in Duralumin

Description: This report includes descriptive material on rivet inspection, types of rivets and sizes. Tabular data on shearing strength of rivets at failure, ultimate shear of various rivets, tensile tests of rivet plate, and tensile strength values of riveted joints are provided.
Date: December 1930
Creator: Pleines, Wilhelm
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Riveting in Metal Airplane Construction Part 3: Strength of Riveted Joints in Duralumin (Continued), Test Installation and Arrangement

Description: This report includes strength of riveted joints in duralumin, descriptions of test procedure and results of tests. Tabulated data includes: curshing strength by failure for various conditions, shearing strength of hole edge zone in direction of tearing, tearing strengths of plates weakened by rivet holes, and enlargement of holes at beginning of break.
Date: December 1930
Creator: Pleines, Wilhelm
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Riveting in Metal Airplane Construction Part 4: Strength of Riveted Joints in Duralumin (Concluded), Comparative Tests With Riveted Joints

Description: Tests were made to determine the crushing strength of a riveted joint, in order to define the difference in crushing stregth between a strictly bolted joint and a riveted joint. The object was to tabulate the crushing strength by failure on various plate thicknesses for a one-rivet double-shear riveted joint.
Date: December 1930
Creator: Pleines, Wilhelm
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Maneuverability investigation of an F6C-4 fighting airplane

Description: "In order to compare the relative maneuverability of two fighting airplanes and to accumulate additional data to assist in establishing a satisfactory criterion for the maneuverability of any airplane, the National Advisory Committee for Aeronautics has conducted maneuverability investigations on the F6C-3 (water-cooled engine) and the F6C-4 (air-cooled engine) airplanes. The investigation made on the F6C-3 airplane was reported in NACA-TR-369. This report contains the results of the investigat… more
Date: December 12, 1930
Creator: Dearborn, C. H. & Kirschbaum, H. W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Coal-Mine Fatalities in November, 1930

Description: Report issued by the U.S. Bureau of Mines on the fatalities of coal miners in November, 1930. The common causes of death, and the location of the mines that the fatalities occurred in are listed. This report includes tables.
Date: December 1931
Creator: Adams, William Waugh & Chenoweth, L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Development of a Non-Autorotative Airplane Capable of Steep Landing

Description: In the following we develop a non-autorotating monoplane wing. The conditions imposed on such a wing, aside from its freedom from autorotation,with respect to its polars and its construction, are taken into account as far as possible. It is indicated that the autorotation characteristics of a wing are dependent upon the speed of air flow as well as on the angle of yaw. This report postulates the knowledge of the behavior of certain conventional wings of different chords and cambers with respect… more
Date: December 1931
Creator: Schmidt, Wilhelm
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The effectiveness of a double-stem injection valve in controlling combustion in a compression-ignition engine

Description: An investigation was made to determine to what extent the rates of combustion in a compression-ignition engine can be controlled by varying the rates of fuel injection. The tests showed that the double-stem valve operated satisfactorily under all normal injection conditions; the rate of injection has a definite effect on the rate of combustion; the engine performance with the double-stem valve was inferior to that obtained with a single-stem valve; and the control of injection rates permitted b… more
Date: December 1931
Creator: Spanogle, J. A. & Whitney, E. G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Factors Influencing Flow of Natural Gas Through High-Pressure Transmission Lines

Description: Report issued by the U.S. Bureau of Mines on the effects of different operating conditions on high-pressure natural gas pipelines. Analysis of past and current studies on natural gas transmission are presented. This report includes tables, graphs, and an illustration.
Date: December 1931
Creator: Berwald, W. B. & Johnson, T. W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Goldstein's Solution of the Problem of the Aircraft Propeller With a Finite Number of Blades

Description: This report examines the Betz theory on frictionless, lightly loaded propellers and Prandtl's addendum extended to moderately loaded propellers. The author then goes on to extend the discussion to Goldstein's solution for propellers with a finite number of blades.
Date: December 1931
Creator: Helmbold, H. B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The interference effects on an airfoil of a flat plate at mid-span position

Description: "This report gives the results of an investigation of the mutual interference of an airfoil and a flat plate inserted at mid-span position. The tests were conducted in the Variable-Density Wind Tunnel of the National Advisory Committee for Aeronautics at a high value of the Reynolds Number. The interference effects of this combination were found to be small. Supplementary tests indicated that the use of fillets decreases both the lift and drag slightly. A bibliography of publication dealing wit… more
Date: December 1931
Creator: Ward, Kenneth E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Liquid Cooling of Aircraft Engines

Description: This report presents a method for solving the problem of liquid cooling at high temperatures, which is an intermediate method between water and air cooling, by experiments on a test-stand and on an airplane. A utilizable cooling medium was found in ethylene glycol, which has only one disadvantage, namely, that of combustibility. The danger, however is very slight. It has one decided advantage, that it simultaneously serves as protection against freezing.
Date: December 1931
Creator: Weidinger, Hanns
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Mammals of New Mexico

Description: Summary of the species of mammals native to New Mexico, including a map of the life zones, descriptions of the physiographic features, and lists of characteristic zone-marking plants, birds, mammals.
Date: December 1931
Creator: Bailey, Vernon
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Method of Determining the Weights of the Most Important Simple Girders

Description: "This paper presents a series of tables for the simple and more common types of girders, similar to the tables given in handbooks under the heading "Strength of Materials," for determining the moments, deflections, etc., of simple beams. Instead of the uniform cross section there assumed, the formulas given here apply only to girders of "uniform strength," i.e., it is assumed that a girder is so dimensioned that a given load subjects it to a uniform stress throughout its whole length. This prin… more
Date: December 1931
Creator: Cassens, J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Tests of N.A.C.A. airfoils in the variable density wind tunnel Series 44 and 64

Description: This note is one of a series covering an investigation of a number of related airfoils. It presents the results obtained from tests in the N.A.C.A. Variable Density Wind Tunnel of two groups of six airfoils each. One group, the 44 series, has a maximum mean camber of 4 percent of the chord at a position 0.4 of the chord behind the leading edge and the other group, the 64 series, has a maximum mean camber of 6 percent of the chord at the same position. The members within each group differ only i… more
Date: December 1931
Creator: Jacobs, Eastman N. & Pinkerton, Robert M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Wind Tunnel of the Bucharest Polytechnic Institute

Description: This report describes the Bucharest wind tunnel and presents numerous photographs and diagrams. The wind tunnel is of the closed- circuit type, the return being symmetrical with respect t o the longitudinal axis of the tunnel. Th e tunnel is of the horizontal type with a diameter of 3. 2 m (10. 5-ft.) a t the beginning of the entrance cone, and 1.5 m ( 4,92 ft.) at the entrance to the test chamber. The latter, 2 m (6.56 ft.) long, may be either of the open-jet type or enclosed in a cylindrical … more
Date: December 1931
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel Research Comparing Lateral Control Devices, Particularly at High Angles of Attack 1: Ordinary Ailerons on Rectangular Wings

Description: "This report is the first in a series in which it is intended to compare the relative merits of all ordinary and some special forms of ailerons and other lateral control devices in regard to their effect on lateral controllability, lateral stability, and airplane performance. The comparisons are based on wind-tunnel test data, all the control devices being fitted to model wings having the same span, area, and airfoil section, and being subjected to the same series of force and rotation tests. T… more
Date: December 10, 1931
Creator: Weick, Fred E. & Wenzinger, Carl J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Automatic Stability of Airplanes

Description: It is endeavored in this report to give a full outline of the problem of airplane stability and to classify the proposed solutions systematically. Longitudinal stability, which can be studied separately, is considered first. The combination of lateral and directional stabilities, which cannot be separated, will be dealt with later.
Date: December 1932
Creator: Haus
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen