Technical Report Archive & Image Library (TRAIL) - 1,563 Matching Results
Search Results
- Abstracts of Current Decisions on Mines and Mining: May to August, 1919
- Bulletin issued by the U.S. Bureau of Mines: "This publication is devoted exclusively to a review and abstracts of decisions based on the laws governing the rights and duties of mine owners, operators, miners, and persons trafficking in all kinds of mining properties. It includes abstracts of current decisions of all the Federal and State courts of last resort on questions relating to the mining industries" (Bulletin 61, p. 9).
- The aerodynamic properties of thick aerofoils suitable for internal bracing
- From Introduction: "The object of this investigation was to determine the characteristics of various types of wings having sufficient depth to entirely inclose the wing bracing, and also to provide data for the further design of such sections. Results of the investigation of the following subjects are given: (1) effect of changing the upper and lower camber of thick aerofoils of uniform section; (2) effect of thickening the center and thinning the tips of a thin aerofoil; (3) effect of adding a convex lower surface to a tapered section; (4) effect of changing the mean thickness with constant center and tip sections; and (5) effect of varying the chord along the span."
- The altitude laboratory for the test of aircraft engines
- Report presents descriptions, schematics, and photographs of the altitude laboratory for the testing of aircraft engines constructed at the Bureau of Standards for the National Advisory Committee for Aeronautics.
- Aluminum and Its Light Alloys
- Report is a summary of research work which has been done here and abroad on the constitution and mechanical properties of the various alloy systems with aluminum.
- Annual Report of the National Advisory Committee for Aeronautics (4th). Administrative Report Including Technical Reports Nos. 24 to 50
- Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, expenditures, problems, recommendations, and a compilation of technical reports produced.
- Annual Report of the National Advisory Committee for Aeronautics (5th). Administrative Report Including Technical Reports Nos. 51 to 82
- Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, expenditures, and a compilation of technical reports produced.
- Approved Explosion-Proof Coal-Cutting Equipment
- Report discussing description of equipment tested to prevent explosions when using coal-cutting explosions and provides explanation of fire damp protection theory.
- Bibliography of Petroleum and Allied Substances, 1917
- From Introduction: "This bulletin is the third of the series of yearly petroleum bibliographies being published by the Bureau of Mines."
- Bomb Trajectories
- The report is a mathematical treatise dealing with the trajectories of bombs of high terminal velocity, dropped from a great altitude.
- Calculation of Low-Pressure Indicator Diagrams
- Report develops a fundamental conception and partial application of a method for calculating the pressure-volume relationships to be expected for any given engine design. It outlines a method of computing and interpreting low-pressure indicator cards.
- Carbureting Conditions Characteristics of Aircraft Engines
- Tests were conducted at the altitude laboratory erected at the Bureau of Standards for the National Advisory Committee for Aeronautics to determine the changes in engine performance with changes in atmospheric temperature and pressure at various levels above the earth's surface, with special reference to (a) the variables affecting the functioning of the carburetor and (b) the changes in performance resulting from variables in the carburetor itself. This report constitutes a concise statement of the difficulties to be encountered in this branch of carburetion.
- Casing Troubles and Fishing Methods in Oil Wells
- From introduction: "The Bureau of Mines, in its researches aimed to prevent wastes and to increase efficiency in oil-well practice, has investigated the matter of casing troubles and fishing methods. The results of the investigation are set forth in this paper."
- Characteristics of High-Tension Magnetos
- This report gives the results of an investigation made into the fundamental physical characteristics of high-tension ignition magnetos, and also describes the methods used for measuring the quantities involved.
- Coal-Mine Fatalities in the United States, 1919: and Coal-Mine Statistics Supplementing Those Published in Bulletin 115
- Supplementary report published by the U.S. Bureau of Mines regarding fatalities in coal mines located in the United States: "In addition to giving monthly fatality tables for 1919, this report includes several tables that were published in various monthly statements since 1914, thus making available in one publication all of the data compiled since that time" (p. 9).
- Comparison of United States and British Standard Pitot-Static Tubes
- The results shown in this report give a comprehensive comparison of the accuracy of United States and British standard pitot tubes.
- Construction of Models for Tests in Wind Tunnels
- Report deals with the methods of constructing aerofoils and all other parts of a model airplane, including discussion of the degree of accuracy.
- Development of Air Speed Nozzles
- Report describes the development of a suitable speed nozzle for the first few thousand airplanes made by the United States during the recent war in Europe, and to furnish a basis for more mature instruments in the future. Requirements for the project were to provide a suitable pressure collector for aircraft speed meters and to develop a speed nozzle which would be waterproof, powerful, unaffected by slight pitch and yaw, rugged and easy to manufacture, and uniform in structure and reading, so as not to require individual calibration.
- Effect of Altitude on Radiator Performance
- As an airplane rises to high altitudes the decrease in the density and the temperature of the air have important effects on the performance of the radiator. This report gives the results of a study of the effect of reduced pressure and temperature upon the capacity of airplane radiators. A method is presented by which the performance of a radiator at an altitude may be estimated for a particular speed of the airplane at a particular altitude.
- The Effect of Kiln Drying on the Strength of Airplane Woods
- This report is a very complete treatise on the comparative strength of air and kiln dried wood. The series of tests includes 26 species of wood, approximately 100 kiln runs, and over 10,000 mechanical tests.
- Effect of Temperature and Pressure on the Sparking Voltage
- This report presents the results of an investigation which was to determine how the voltage necessary to produce the proper spark discharge varies with the pressure and temperature of the gas in which the discharge takes place.
- The Efficiency of Small Bearings in Instruments of the Type Used in Aircraft
- This report deals with the construction and properties of bearings and pivots for use in instruments. The static and running friction for both thrust and radial loads was determined for a number of conical pivots and cylindrical and ball bearings. The static rocking friction was also measured for several conical and ball bearings under a heavy load, especially to determine their suitability for use in N. P. L. (National Physical Laboratory) type wind tunnel balance.
- Experimental Research on Air Propellers, 3
- Report presents the results of wind tunnel tests of propellers that examined the influence of the following characteristics: (1) nominal pitch ratio 1.3 combined with a certain number of the more common or standard forms and proportions; (2) driving face slightly rounded or convex; (3) change in the location of the maximum thickness ordinate of the blade section; (4) pushing forward the leading edge of the blade, thus giving a rounded convex surface on the leading side of the driving face. (5) a series of values for the constant "angle of attack" in forming propellers with radially increasing pitch. In accordance with these purposes tests were carried out on 28 propellers.
- Extinguishing and Preventing Oil and Gas Fires
- From Introduction: " As the subject of oil and gas is necessarily broad, no attempt is made in this bulletin to treat it exhaustively; rather the bulletin aims to point out what has been done by operators in the past, and to describe various fire-prevention methods and fire-fighting apparatus which are being used or adopted by many of the larger oil companies. These methods and apparatus, it is believed, if universally employed by operators, will largely decrease the present enormous annual losses."
- Fabric Fastenings
- The study of aeronautical fabrics has led to a consideration of the best methods of attaching and fastening together such materials. This report presents the results of an investigation upon the proper methods of attaching fabrics to airplane wings. The methods recommended in this report have been adopted by the military services.
- The Ferrosilicon Process for the Generation of Hydrogen
- Report describes the generation of hydrogen by the reaction between ferrosilicon, sodium hydroxide, and water. This method known as the ferrosilicon method is especially adapted for use in the military field because of the relatively small size and low cost of the generator required to produce hydrogen at a rapid rate, the small operating force required, and the fact that no power is used except the small amount required to operate the stirring and pumping machinery. These advantages make it possible to quickly generate sufficient hydrogen to fill a balloon with a generator which can be transported on a motor truck. This report gives a summary of the details of the ferrosilicon process and a critical examination of the means which are necessary in order to make the process successful.
- Fuselage Stress Analysis
- Report analyzes the stresses in a fuselage of the built-up type in which the shear is taken by diagonal bracing wires. Tests are conducted for landing, flying, and thrust loads.
- A Glossary of the Mining and Mineral Industry
- From Introduction: "This glossary is published by the Bureau of Mines as a contribution to the mining literature in the belief that it will fill a long-felt need. It contains about 20,000 terms; these include both technical and purely local terms related to metal mining, coal mining, quarrying, petroleum, and natural gas, and metallurgical works; names of useful, important, and common minerals and rocks; and geological terms. It presents in one comprehensive volume the available standard, technical terms relating to the mining and mineral industry, as well as provincialisms that have been or are now in use in English-speaking countries."
- Glues Used in Airplane Parts
- This report was prepared for the National Advisory Committee for Aeronautics and presents the results of investigations conducted by the Forest Products Laboratory of the United States Forest Service on the manufacture, preparation, application, testing and physical properties of the different types of glues used in wood airplane parts.
- Head Resistance Due to Radiators
- Part 1 deals with the head resistance of a number of common types of radiator cores at different speeds in free air, as measured in the wind tunnel at the bureau of standards. Part 2 gives the results of wind tunnel tests of resistance on a model fuselage with a nose radiator. Part 3 presents the results of preliminary tests of head resistance of a radiator enclosed in a streamlined casing.
- Heat Energy of Various Ignition Sparks
- "This report describes a method developed at the Bureau of Standards for measuring the total energy liberated as heat in a spark gap by an ignition system. Since this heat energy is obtained from the electromagnetic energy stored in the windings of the magneto or coil, it is a measure of the effectiveness of the device as an electric generator" (p. 3).
- Investigation of the Muffling Problem for Airplane Engines
- The experimentation presented in this report falls in two divisions: first, the determination of the relation between back pressure in the exhaust line and consequent power loss, for various combinations of speed and throttle positions of the engine; second, the construction and trial of muffler designs covering both type and size. Report deals with experiments in the development of a muffler designed on the principle which will give the maximum muffling effect with a minimum loss of power. The main body of the work has been done on a Curtiss OX eight-cylinder airplane engine, 4 by 5 inches, rated 70 horsepower at 1,200 revolutions per minute.
- Manganese: Uses, Preparation, Mining Costs and the Production of Ferro-Alloys
- From Introduction: "In this bulletin the reports on manganese are presented, which range in scope from the beneficiation of the ore to the utilization of the metal."
- Mining and Preparing Domestic Graphite for Crucible Use
- From Prefactory Statement: "In this bulletin are presented the results obtained in the first two phases of the work outlined above. The bulletin is in two parts. The first part describes the methods of mining and milling used, suggests a standard method of sampling finished graphite, and describes a rapid and convenient method of analysis developed at the Pittsburgh station of the Bureau of Mines, to which has been assigned the analytical and microscopic work. The second part describes experiments on the concentration and milling of graphite, which were made at the Salt Lake City, Utah, station."
- A New Process for the Production of Aircraft-Engine Fuels
- Report describes experiments conducted on a new method of producing high-grade aviation gasoline at a test laboratory established at Charleston, W. Va. For the National Advisory Committee for Aeronautics.
- Nomenclature for Aeronautics
- Report defines the principal terms which have come into use in the development of aeronautics. It was prepared in cooperation with a committee engaged upon a similar undertaking in Great Britain. As a result this nomenclature is in substantial agreement with the one which has been adopted by the aeronautical authorities of Great Britain.
- On the Elementary Relation Between Pitch, Slip, and Propulsive Efficiency
- The author examines the current theory on the importance of reducing slip in airplane propellers. The author feels an exaggerated importance is attached to this supposition and feels that the increase in friction by an increase in propeller area or number of revolutions can't be discounted.
- The Parker Variable Camber Wing
- This report deals with the problem of increasing the speed range of an airplane by varying the camber of a wing surface. The variable camber wing offers many advantages over the variable incidence type of speed range.
- Pennsylvania Mining Statutes Annotated
- From Author's Explanation: "This bulletin is intended to include every legislative enactment of the Commonwealth of Pennsylvania relating to the mining and mineral industries. The entire body of mining laws is set out for these obvious reasons: (1) To show the progress and advancement made, and the changes through which the enactments have passed; (2) an author may not assume the determination of what particular laws are in fact in effect, as this is within the jurisdiction of the courts alone; (3) it was at least necessary to set out all acts that had at any time been construed by the courts."
- Power Characteristics of Fuels for Aircraft Engines
- Report presents the summation of results obtained in the testing of fuels of various compositions and characteristics in the altitude laboratory. The data upon which this report is based has had an important influence upon the writing of specifications for the various grades of aviation fuels.
- Preliminary Report on Free Flight Tests
- Results are presented for a series of tests made by the Advisory Committee's staff at Langley Field during the summer of 1919 with the objectives of determining the characteristics of airplanes in flight and the extent to which the actual characteristics differ from those predicted from tests on models in the wind tunnel, and of studying the balance of the machines and the forces which must be applied to the controls in order to maintain longitudinal equilibrium.
- Properties and Preparation of Ceramic Insulators for Spark Plugs
- Report describes in detail the preliminary experiments which were made on the conductivity of spark-plug insulators in order to develop a satisfactory comparative method for testing various spark-plug materials. Materials tested were cements, porcelain, feldspar, and quartz.
- Quality of Gasoline Marketed in the United States
- From Scope of the Present Bulletin: "The present bulletin furnishes, in addition to the analytical figures, fairly complete data on the production, consumption, and quality of gasoline."
- Results of Tests on Radiators for Aircraft Engines
- Part 1 is to present the results of tests on 56 types of core in a form convenient for use in the study of the performance of and possible improvements in existing designs. Working rules are given by which the data contained in the report may be used, and the most obvious conclusions as to the behavior of cores are summarized. Part 2 presents the results of tests made to determine the pressure necessary to produce water flows up to 50 gallons per minute through an 8-inch square section of radiator core. These data are of special value in evaluating the hydraulic head against which the circulating pump is required to operate.
- Self-Luminous Materials
- Report outlines specifications for the preparation and application of self-luminous materials to be used for the illumination of various instruments, especially those used for aeronautics.
- Slip-Stream Corrections in Performance Computation
- This report is an analysis of experiments performed by Eiffel on the air velocity in slip stream of a propeller, and also includes a theoretical discussion of the magnitude of the velocity in different propellers.
- Spark Plug Defects and Tests
- The successful operation of the spark plug depends to a large extent on the gas tightness of the plug. Part 1 of this report describes the method used for measuring the gas tightness of aviation spark plugs. Part 2 describes the methods used in testing the electrical conductivity of the insulation material when hot. Part 3 describes the testing of the cold dielectric strength of the insulation material, the resistance to mechanical shock, and the final engine test.
- Stability of the Parachute and Helicopter
- This report deals with an extension of the theory of stability in oscillation to the case of aircraft following a vertical trajectory, and particularly to the oscillations of parachutes.
- The Strength of One-Piece Solid, Build-Up and Laminated Wood Airplane Wing Beams
- The purpose of this report is to summarize the results of all wood airplane wing beams tested to date in the Bureau of Standards Laboratory in order that the various kinds of wood and methods of construction may be compared. All beams tested were of an I section and the majority were somewhat similar in size and cross section to the front wing beam of the Curtiss JN-4 machine. Construction methods may be classed as (1) solid beams cut from solid stock; (2) three-piece beams, built up of three pieces, web and flanges glued together by a tongue-and-groove joint and (3) laminated beams built up of thin laminations of wood glued together.
- Structure in Paleozoic Bituminous Coals
- From Introduction: "To fill in a few of these gaps and to clarify some of the existing confusion is the aim of this paper. The immediate cause that led the author to investigate further the composition of coal and the origin and structure of its constituents was that when an attempt was made to discover the meaning of the coking and noncoking properties of a coal a more exact knowledge of the nature of the coal was required than was then available."
- The Structure of Airplane Fabrics
- This report prepared by the Bureau of Standards for the National Advisory Committee for Aeronautics supplies the necessary information regarding the apparatus and methods of testing and inspecting airplane fabrics.