Technical Report Archive & Image Library (TRAIL) - 5,448 Matching Results

Search Results

open access

Aerodynamic Characteristics of Horizontal Tail Surfaces

Description: From Summary: "Collected data are presented on the aerodynamic characteristics of 17 horizontal tail surfaces including several with balanced elevators and two with end plates. Curves are given for coefficients of normal force, drag, and elevator hinge moment. A limited analysis of the results has been made. The normal-force coefficients are in better agreement with the lifting-surface theory of Prandtl and Blenk for airfoils of low aspect ratio than with the usual lifting-line theory. Only par… more
Date: 1940
Creator: Silverstein, Abe & Katzoff, S.
Partner: UNT Libraries Government Documents Department
open access

Boundary-Layer Transition on the N.A.C.A. 0012 and 23012 Airfoils in the 8-Foot High-Speed Wind Tunnel

Description: Report presenting determinations of boundary-layer transition on the NACA 0012 and 23012 airfoils in the high-speed wind tunnel over a range of Reynolds numbers. For all of the lift coefficients that testing occurred at, transition occurred in the region of estimated laminar separation at low Reynolds numbers and approached the point of minimum static pressure as a forward limit at high Reynolds numbers.
Date: January 1940
Creator: Becker, John V.
Partner: UNT Libraries Government Documents Department
open access

Boundary-Layer Transition on the N.A.C.A. 0012 and 23012 Airfoils in the 8-Foot High-Speed Wind Tunnel, Special Report

Description: Determinations of boundary-layer transition on the NACA 0012 and 2301 airfoils were made in the 8-foot high-speed wind tunnel over a range of Reynolds Numbers from 1,600,000 to 16,800,000. The results are of particular significance as compared with flight tests and tests in wind tunnels of appreciable turbulence because of the extremely low turbulence in the high-speed tunnel. A comparison of the results obtained on NACA 0012 airfoils of 2-foot and 5-foot chord at the same Reynolds Number permi… more
Date: January 1940
Creator: Becker, John V.
Partner: UNT Libraries Government Documents Department
open access

Coal-Mine Accidents in the United States, 1937

Description: Report compiled by the U.S. Bureau of Mines including statistics on fatal and non-fatal accidents in coal mines located in the United States as well as data regarding the various operations (e.g., number of miners employed and average production). The information is organized into tables for comparison and the text draws some overall conclusions in the summary.
Date: 1940
Creator: Adams, William W.; Geyer, L. E. & Parry, M. G.
Partner: UNT Libraries Government Documents Department
open access

Constant-Pressure Blowers

Description: "The conventional axial blowers operate on the high-pressure principle. One drawback of this type of blower is the relatively low pressure head, which one attempts to overcome with axial blowers producing very high pressure at a given circumferential speed. The Schicht constant-pressure blower affords pressure ratios considerably higher than those of axial blowers of conventional design with approximately the same efficiency" (p. 1).
Date: January 1940
Creator: Sörensen, E.
Partner: UNT Libraries Government Documents Department
open access

Determination of the Characteristics of Tapered Wings

Description: This report presents tables and charts for use in determining the characteristics of tapered wings. Theoretical factors are given from which the following characteristics of tapered wings may be found: the span lift distribution, the induced-angle-of attack distribution, the lift-curve slope, the angle of zero lift, the induced drag, the aerodynamic-center position, and the pitching moment about the aerodynamic center.
Date: 1940
Creator: Anderson, Raymond F.
Partner: UNT Libraries Government Documents Department
open access

The Development of Electrical Strain Gages

Description: "The design, construction, and properties of an electrical-resistance strain gage consisting of fine wires molded in a laminated plastic are described. The properties of such gages are discussed and also the problems of molding of wires in plastic materials, temperature compensation, and cementing and removal of the gages. Further work to be carried out on the strain gage, together with instrument problems, is discussed" (p. 1).
Date: January 1940
Creator: de Forest, A. V. & Leaderman, H.
Partner: UNT Libraries Government Documents Department
open access

DFS Dive-Control Brakes for Gliders and Airplanes and Analytical Study of the Drag of the DFS Dive-Control Brake

Description: These two reports are surveys on the progress and present state of development of dive-control flaps for gliders and airplanes. The second article describes how on the basis of wind tunnel and free-flight tests, the drag increase on brake flaps of the type DFS, can be predicted. Pressure records confirm a two-dimensional load distribution along the brake-flap surface.
Date: January 1940
Creator: Jacobs, Hans & Wanner, Adolf
Partner: UNT Libraries Government Documents Department
open access

Effect of Wing Loading, Aspect Ratio, and Span Loading of Flight Performances

Description: "An investigation is made of the possible improvements in maximum, cruising, and climbing speeds attainable through increase in the wing loading. The decrease in wing area was considered for the two cases of constant aspect ratio and constant span loading. For a definite flight condition, an investigation is made to determine what loss in flight performance must be sustained if, for given reasons, certain wing loadings are not to be exceeded. With the aid of these general investigations, the tr… more
Date: January 1940
Creator: Göthert, B.
Partner: UNT Libraries Government Documents Department
open access

Explosion Hazards in Storage-Battery Rooms

Description: Report issued by the Bureau of Mines discussing the safety and explosion hazards present in storage-battery rooms. Descriptions of storage-battery rooms and methods of ventilation are presented. This report includes tables, illustrations, and photographs.
Date: 1940
Creator: Jones, G. W.; Campbell, John; Dillon, R. E. & Benson, O. B.
Partner: UNT Libraries Government Documents Department
open access

Fire-Retardant Treatments of Liquid-Oxygen Explosives

Description: From Introduction Present Investigation: "The scope of the investigation was limited to study of the effects of fire-retardant treatments on the resistance to ignition, physical characteristics, and practical hazards of handling the liquid-oxygen explosive prepared from the granular carbonaceous absorbent mentioned, from wrappers of a triple-filled canvas, and from a liquid oxygen of standard high purity."
Date: 1940
Creator: Denues, A. R. T.
Partner: UNT Libraries Government Documents Department
open access

The frequencies of cantilever wings in beam and torsional vibrations

Description: From Summary: "Methods are described for calculating the period and frequency of vibration of cantilever wings and similar structures in which the weight and moment of inertia vary along the span. Both the beam and torsional frequencies may be calculated by these methods. The procedure is illustrated by examples."
Date: January 1940
Creator: Burgess, C. P.
Partner: UNT Libraries Government Documents Department
open access

General Potential Theory of Arbitrary Wing Section

Description: This report gives the exact treatment of the problem of determining the 2-dimensional potential flow around wing sections of any type. The treatment is based directly on the solution of this problem as advanced by Theodorsen in NACA-TR-411. The problem condenses into the compact form of an integral equation capable of yielding numerical solutions by a direct process.
Date: 1940
Creator: Theodorsen, T. & Garrick, I. E.
Partner: UNT Libraries Government Documents Department
open access

Geology of Area Between Green and Colorado Rivers, Grand and San Juan Counties, Utah

Description: From Abstract: "The area described in this report comprises about 900 square miles of arid land lying between the Green and Colorado Rivers south of the Denver & Rio Grande Western Railroad and southwest of the Salt Valley anticline. The rocks that crop out or that have been encountered in wells drilled in the are all sedimentary and range in age from Pennsylvania ti Upper Cretaceous. Mesizoic strata are especially well represented."
Date: 1940
Creator: McKnight, Edwin Thor
Partner: UNT Libraries Government Documents Department
open access

Geology of the Kettleman Hills Oil Field, California: Stratigraphy, Paleontology, and Structure

Description: From Introduction: The field work that furnished the basis for this report was begun in 1930 and was continued at intervals until 1934. The anticlinal character of the Kettleman Hills is apparent to even the casual observer, but the many structural complications due to an intricate network of minor faults, at least in North Dome and Middle Dome, are much less obvious. Though it is improbable that these faults have any relation to the occurrence of oil, an attempt was made to map them, not only … more
Date: 1940
Creator: Woodring, W. P.; Stewart, Ralph & Richards, R. W.
Partner: UNT Libraries Government Documents Department
open access

Knocking in an Internal-Combustion Engine

Description: The question remains open of the relation between the phenomena of knocking in the engine and the explosion wave. The solution of this problem is the object of this paper. The tests were conducted on an aircraft engine with a pyrex glass window in the cylinder head. Photographs were then taken of various combinations of fuels and conditions.
Date: January 1940
Creator: Sokolik, A. & Voinov, A.
Partner: UNT Libraries Government Documents Department
open access

Mechanical Concentration of Gases

Description: From Introduction: "This bulletin deals with a new mechanical means of attacking the problem of separation. Although it is improbable that any one type of separation could hope to find universal application, the method described is to be regarded as an alternative to conventional means that has attractive possibilities in certain instances."
Date: 1940
Creator: Maier, C. G.
Partner: UNT Libraries Government Documents Department
open access

Mechanical Properties of Flush-Riveted Joints

Description: Report discusses the strength of several types of flush-riveted joints, including single-shearing, double-shearing, and tensile specimens. The stress at failure, type of failure, and d/t ratio are provided. Dimpled joints were found to be the strongest, but their strength was heavily influenced by the details of their construction.
Date: January 1940
Creator: Bruggeman, William C. & Roop, Frederick C.
Partner: UNT Libraries Government Documents Department
open access

Mechanical Shoveling in Underground Metal Mines

Description: From Scope of Bulletin: "The object of the current bulletin is to present recent data on mechanical shoveling in underground metal mines and in selected nonmetal mines. This bulletin supplements the 1924 edition, but the main discussion covers mechanical shoveling only, because most of the new material relates to equipment recently developed, to improved technique in loading, and ti changes in loading practice in certain mining districts."
Date: 1940
Creator: Mosier, McHenry & Steinmesch, J. H.
Partner: UNT Libraries Government Documents Department
open access

Mineral Industries Survey of the United States, California: Tuolumne and Mariposa Counties, Mother Lode District (South). Mines of the Southern Mother Lode Region, Part 2 -- Tuolumne and Mariposa Counties

Description: Report issued by the Bureau of Mines over mining operations in the southern Mother Lode Region of California. A review of this area is presented, and discussed. This report includes tables, illustrations, and photographs.
Date: 1940
Creator: Julihn, C. E. & Horton, F. W.
Partner: UNT Libraries Government Documents Department
open access

Report of the Twenty-Ninth National Conference on Weights and Measures, 1939

Description: Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.
Date: 1940
Creator: United States. National Bureau of Standards.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen