Technical Report Archive & Image Library (TRAIL) - 93 Matching Results

Search Results

Results: 1 - 24 next
open access

Semi Works Studies for the Reduction of Corrosion-Product Impurities in UR-Plant UO3

Description: This report describes the work carried out in 321 Building semiworks equipment, to define the factors contributing to high corrosion-product contamination and presents recommendations for reducing the impurity level to meet current specifications (maximum of 200 parts total metals per million parts U).
Date: June 14, 1960
Creator: Amos, L. C.; Kirkendall, B. E. & Adler, K. L.
Partner: UNT Libraries Government Documents Department
open access

Fuel Failure Examinations and Analyses in the High Power Density Program

Description: Summary: The High Power Density Project includes a comprehensive fuel development program which has the objective of developing and demonstrating the performance of a nuclear reactor core having a high power density, long fuel life, and low fabrication cost. The fuel program is made up of two principal tasks. Task 1A consists of irradiation tests in the VBWR of Type 304 stainless steel clad, UO2 pellet type fuel rods fabricated by current commercial processes. Task 1B consists of the investigat… more
Date: September 16, 1963
Creator: Arlt, W. H. & Vandenberg, S. R.
Partner: UNT Libraries Government Documents Department
open access

SM-1 Research and Development Program: Long-lived Induced Activity Buildup During SM-1 Core I Lifetime. Task XVIII, Phase I

Description: Abstract: The results of activity buildup studies in the SM-1 performed during Core I lifetime (June 3, 1957 to April 28, 1960) are reported. Data are presented on the extent, nature, and mechanism of the buildup of long-lived gamma emitting nuclides in the reactor primary system. Radiation levels after reactor shutdown are presented, as well as mathematical equations used to account for the observed activity levels. The data have shown that Co60 is the major contributor to radiation levels in… more
Date: November 30, 1960
Creator: Bergmann, C. A.; Bergen, C.; Cox, J. F.; Chupak, J. & Grant, L. G.
Partner: UNT Libraries Government Documents Department
open access

Interim Report of Nuclear Analysis Performed on SM-2 Core and Vessel : September 1, 1958 to December 31, 1959.

Description: Abstract: This technical report contains a description of the nuclear analysis performed upon the SM-2 core and vessel for the period September 1, 1958 to December 31, 1959. Calculations are given for core reactivity, power distributions, lifetime, reactor control, kinetics, radiation problems, fuel and poison burn-ups, and the nuclear effects of poisons, temperature, and geometry. Wherever possible, experimental data is included in order to test the validity of the analytical models. The SM-… more
Date: May 27, 1960
Creator: Bobe, P. E.; Birken, S. H.; Byrne, B. J.; Clancy, E. F. & Fried, B. E.
Partner: UNT Libraries Government Documents Department
open access

Investigation of Local Boiling of SM-1

Description: Abstract; SM-1 Reactor Core I Rearranged and Spiked, and Core II with Special Components were analyzed under various off-design conditions to induce nucleate boiling. The steady state code, STDY-3, written for the thermal analysis of pressurized water cores, was employed for the analysis. The code performs a complete steady state parallel channel thermal analysis for both nominal and hot channels. Thermal characteristics of individual elements were investigated while changing the parameters of… more
Date: June 20, 1961
Creator: Bradley, P. L.
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for SM-1 Core Temperature and Flow Instrumentation (Task XIV) Covering Special Test Procedures.

Description: Abstract: Test procedures for special tests involving in-core SM-1 temperature and flow instrumentation are described (Task XIV Package Tests). These tests involve in-core steady state flow and temperature measurements, loss of flow transients, load transients, reduced primary system pressure operations and reduced element flow. The thermal and hydraulic conditions prevailing in these tests, including steady state and transient burnout rations, are developed. The effects of reduced system pres… more
Date: February 28, 1962
Creator: Bradley, P. L. & Coombe, J. R.
Partner: UNT Libraries Government Documents Department
open access

Wet Fluoride Studies: Calcium Plutonium (IV) Fluoride

Description: Laboratory studies have shown that the double salt, CaF2-PuF4, can be precipitated by rapid addition of hydro-fluoric acid to solutions containing 25 to 75 g Pu/1, caleium equimolar to plutonium, and 1 to 10 M HNO3. The precipitate, which is subsequently washed with water and dried to 300 degrees C in dehumidified, deoxygenated argon, can be reduced thermally by calcium to give high yields of plutonium metal.
Date: December 22, 1953
Creator: Branin, P. B.
Partner: UNT Libraries Government Documents Department
open access

SM-1 Research and Development Program, Activity Buildup Program Task 1 : final report February 1958 to June 1959

Description: Abstract: The results of activity buildup studies in the SM-1 (APPR-1) performed from February 1958 to January 1959 are reported. Data are presented on the extent, nature, and mechanism of the buildup of long-lived gamma emitting nuclides in the reactor primary system. Mathematical equations to describe the activity buildup are derived. Radiation levels after reactor shutdown are presented, as well as the predicted radiation levels at the end of core life.
Date: August 10, 1959
Creator: Brown, William S.; Bergen, C. Richard.; Bergmann, Carl A.; Chupak, Julius.; Fitzsimmons, Susanne R. & Grant, Louis G.
Partner: UNT Libraries Government Documents Department
open access

Preoperational Power Stability Analysis of the Consumers Big Rock Point Plant

Description: Summary: An analytical study of the stability of the Big Rock Nuclear Reactor has been performed for the plant as built, and supplements a previous design stability study. The plant has been determined by this analysis to be very stable under every mode of operation anticipated during Phase I of the development program testing. Even under conservative assumptions of system parameters the minimum calculated gain and phase margins do not go below 13.0 db and 46 degrees, respectively. (Nor are … more
Date: February 1964
Creator: Case, J. M.
Partner: UNT Libraries Government Documents Department
open access

SM-2 Full Scale Flow Studies Termination Report

Description: Abstract: Hydrodynamic flow studies were conducted on a full scale model of the SM-2 reactor vessel and core. Test fluid was water at 200 psi and 200 degree F. Test facilities, model, and instrumentation design are discussed. Flow distribution in the stationary fuel elements, lattices, and control rods of the second pass was investigated. Pressure losses through the various core components were measured and are compared with calculated values. Observed over-all pressure drop was 71 feet of wate… more
Date: July 30, 1961
Creator: Christenson, J. A.; Richards, W. M. S. & Davidson, S. L.
Partner: UNT Libraries Government Documents Department
open access

Reactor Safety and Fuel Cycle Economics Considerations for Fast Reactors

Description: Abstract: A core design study of a 10 Mwe fast ceramic reactor is presented. Local reactivity coefficients, safety criteria, accident analyses, and economics are considered. An attempt is made to find a new balance of characteristics by purely geometric devices, i.e., by exploring the sodium : fuel ratio and varying the height : diameter ratio of the core. The use of BeO in the core was also investigated.
Date: November 11, 1963
Creator: Cohen, K. P.; Greebler, P.; McNelly, M. J.; Murphy, P. M.; Sherer, D. B. & Zebroski, E. L.
Partner: UNT Libraries Government Documents Department
open access

Proposed R.F. Buncher for A-12

Description: A buncher and pre-accelerator for A-12 is described that has 360 degree acceptance and could handle a current of one ampere from a low voltage source.
Date: June 25, 1952
Creator: Colgate, S. A.
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for SM-1 Core II Without the SM-1 Core I High Burnup Elements and With the PM-1-M-2 Element

Description: Abstract: The removal of both SM-1 Core I high burnup elements from SM-1 Core II and the insertion of the PM-1-M-2 element and the SM-1 Core I spare element in SM-1 Core II is discussed. Nuclear and thermal characteristics of Core II with these changes are presented and conclusions related to the changes in the hazard potential are made. If the core change indicated by this report is made, local peaking factors will be decreased and burnout ratios will be increased. This, of course, in itself… more
Date: October 7, 1961
Creator: Coombe, J. R.; Lee, D. H. & Mathews, F. T.
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for SM-1 Core II With the SM-1 Core II High Burnup Elements Replaced with SM-1 Core I Spare Elements

Description: Abstract: The removal of both SM-1 Core I high burnup elements from the SM-1 Core II and the insertion of two SM-1 Core I spare elements i their places are discussed. Nuclear and thermal characteristics of Core II with the change are presented and conclusion related to the change in hazard potential are made. If the core change indicated by this report is made, local peaking factors will be decreased and burnout ratios will be increased. This, of course, in itself leads to a more conservative… more
Date: October 9, 1961
Creator: Coombe, J. R.; Lee, D. H. & Matthews, F. T.
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for Insertion of the PM-1-M-2 Element in the SM-1 Core II

Description: Abstract: This technical report describes the Martin Co. PM-1-M-2 test element and analyzes the potential hazard incurred by its inclusion in the SM-1 Core II. A nuclear analysis develops power distributions and reactivity effects. Hydraulic and thermal analyses develop anticipated burnout heat flux ratios. An evaluation of the risk involved with the inclusion of this element is presented. In view of the narrow margin by which the PM-1-M-2 test element meets the minimum burnout ratios as def… more
Date: September 1, 1961
Creator: Coombe, J. R.; Scoles, J. F.; Brondel, J. O. & Lee, D. H.
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for the SM-1 Core II With Special Components

Description: Abstract: This technical report describes the changes incurred in the SM-1 by the insertion of the SM-1 Core II and special components. The special components consist of impact specimens, a boron gradient rod, SM-2 elements, a PM-1-M element, and high burnup SM-1 Core I elements. The change in hazards, due to operation of SM-1 with Core II and the special components is evaluated. The analysis indicates there is no change in hazards.
Date: March 30, 1961
Creator: Coombe, J.; Lee, D.; Segalman, I. & Robertson, R.
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for PM-2A Core II

Description: Abstract: This technical report describes the changes incurred in the PM-2A by the planned insertion of PM-2A Core II and the replacement of the startup and check sources. PM-2A Core II components were fabricated to specifications very nearly identical to those of PM-2A Core I. The essential difference in the cores is the boron loading which permits PM-2A Core II to meet a "one-stuck rod criteria" at beginning of life. This core has been subjected to a zero power experiment and loading procedur… more
Date: June 21, 1962
Creator: Coombe, John R. & Stephenson, L. D.
Partner: UNT Libraries Government Documents Department
open access

Maritime Loop Irradiation Program, S-I-5-B-M Fuel Irradiation Water Chemistry, Final Report

Description: Introduction: The purpose of this technical report is to review the water chemistry methods and equipment developed for use with the Maritime Loop Irradiation Program conducted in the General Electric Test Reactor (GETR) from December 2, 1960 to July 19, 1962. Special emphasis is given to areas having general application to other high purity water systems. The Appendix includes a discussion of specific conductivity and pH in high purity water systems. A major section of this report is devoted t… more
Date: August 1, 1963
Creator: Danielson, D. W.; Gilbert, R. S. & Panter, G. E.
Partner: UNT Libraries Government Documents Department
open access

Thermal Analysis of SM-1 Core III

Description: Abstract This technical report covers the thermal analysis performed on the SM-1 Core III for both steady state and transient conditions is reported. SM-1 Core III will be used as a test for Type 3 elements in a PM-2A Core. The steady state analysis indicated minimum departure from nucleate boiling ratios (DNBR) for both design and scram conditions above the minimum criteria of 1.5. Local nucleate boiling was noted in the hot internal channels and lattice passage at scram power conditions. Loss… more
Date: June 29, 1962
Creator: Davidson, S. L.
Partner: UNT Libraries Government Documents Department
open access

Removal of Graphite from Aluminum Surfaces

Description: The first of two general methods are discussed based on the removal of the thin layer of aluminum to which graphite adheres. Two electro-polishing techniques, an electrolytic etch, an anodization-deanodication cycle and two chemical etches are described.
Date: June 30, 1953
Creator: Dillon, R. L. & Hodgson, W. H.
Partner: UNT Libraries Government Documents Department
open access

In-Core Instrumentation Development Program Quarterly Progress Report January - March 1964

Description: The objective of Project Agreement 22 is to determine the feasibility of using in-core ion chambers to cover the complete reactor neutron flux startup range from 10(4) -5 - 10(13) nv using in-core ion chambers. This technical report discusses the following topics: low versus high cable termination impedance, amplifier considerations, noise considerations, gas and pressure selection, cable selection, effect of gamma, effect of temperature, and remaining problems.
Date: April 1964
Creator: DuBridge, R. A.
Partner: UNT Libraries Government Documents Department
open access

In-Core Instrumentation Development Program Quarterly Progress Report June - September 1963

Description: Introduction: The objective of Project Agreement 22 is to determine the feasibility of covering the complete reactor neutron flux start range from 10(3) - 5 x 10(13) nv by using in-core chambers. The counting mode of operating will be used at low neutron fluxes and the root mean square voltage fluctuation mode will be used at high neutron flux levels. Experiments have been run utilizing various ion chambers, gases, gas pressures, voltage, and cables to measure sensitivities and range operating … more
Date: October 1963
Creator: DuBridge, R. A.
Partner: UNT Libraries Government Documents Department
open access

In-Core Instrumentation Development Program Quarterly Progress Report September - December 1963

Description: Introduction: The objective of Project Agreement 22 is to determine the feasibility of using in-core ion chambers to cover the complete reactor neutron flux startup range from 10(4) -5 - 10(13) nv using in-core ion chambers. The counting mode of operation will be used at low neutron flux levels and the RMS voltage fluctuation mode (Campbell Theorem) will be used at high neutron flux levels. The June-September Progress Report (GEAP-4386) shows how the RMS voltage mode can be used, discusses c… more
Date: January 1964
Creator: DuBridge, R. A.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen