You limited your search to:

  Partner: UNT Libraries Government Documents Department
 Decade: 1950-1959
 Serial/Series Title: NACA Technical Notes
 Collection: Technical Report Archive and Image Library
Abnormal grain growth in M-252 and S-816 alloys

Abnormal grain growth in M-252 and S-816 alloys

Date: November 1957
Creator: Decker, R F; Rush, A I; Dano, A G & Freeman, J W
Description: An experimental investigation was carried out on air- and vacuum-melted M-252 and S-816 alloys to find conditions of heating and hot-working which resulted in abnormal grain growth. The experiments were mainly limited to normal conditions of heating for hot-working and heat treatment and normal temperatures of solution treatment were used to allow grain growth after susceptibility to abnormal grain growth was developed by various experimental conditions. Results indicated that small reductions of essentially strain-free metal were the basic cause of such grain growth.
Contributing Partner: UNT Libraries Government Documents Department
Abnormal grain growth in nickel-base heat-resistant alloys

Abnormal grain growth in nickel-base heat-resistant alloys

Date: December 1957
Creator: Decker, R F; Rush, A I; Dano, A G & Freeman, A G
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Abnormal grain growth in S-816 alloy

Abnormal grain growth in S-816 alloy

Date: April 1952
Creator: Rush, A I; Freeman, J W & White, A E
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Accelerations and passenger harness loads measured in full-scale light-airplane crashes

Accelerations and passenger harness loads measured in full-scale light-airplane crashes

Date: August 1953
Creator: Eiband, A Martin; Simpkinson, Scott H & Black, Dugald O
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Accelerations in transport-airplane crashes

Accelerations in transport-airplane crashes

Date: February 1958
Creator: Preston, G Merritt & Pesman, Gerard J
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Accuracy of approximate methods for predicting pressures on pointed nonlifting bodies of revolution in supersonic flow

Accuracy of approximate methods for predicting pressures on pointed nonlifting bodies of revolution in supersonic flow

Date: August 1952
Creator: Ehret, Dorris M.
Description: None
Contributing Partner: UNT Libraries Government Documents Department
The accuracy of the substitute-stringer approach for determining the bending frequencies of multistringer box beams

The accuracy of the substitute-stringer approach for determining the bending frequencies of multistringer box beams

Date: April 1956
Creator: Davenport, William W
Description: None
Contributing Partner: UNT Libraries Government Documents Department
An accurate and rapid method for the design of supersonic nozzles

An accurate and rapid method for the design of supersonic nozzles

Date: February 1955
Creator: Beckwith, Ivan E & Moore, John A
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Achievement of continuous wall curvature in design of two-dimensional symmetrical supersonic nozzles

Achievement of continuous wall curvature in design of two-dimensional symmetrical supersonic nozzles

Date: January 1952
Creator: Evvard, J C & Marcus, Lawrence R
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Acoustic analysis of ram-jet buzz

Acoustic analysis of ram-jet buzz

Date: November 1955
Creator: Mirels, Harold
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Acoustic radiation from two-dimensional rectangular cutouts in aerodynamic surfaces

Acoustic radiation from two-dimensional rectangular cutouts in aerodynamic surfaces

Date: August 1955
Creator: Krishnamurty, K
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Acoustic, thrust, and drag characteristics of several full-scale noise suppressors for turbojet engines

Acoustic, thrust, and drag characteristics of several full-scale noise suppressors for turbojet engines

Date: April 1958
Creator: Ciepluch, Carl C; North, Warren J; Coles, Willard D & Antl, Robert J
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Acoustical treatment for the NACA 8- by 6-foot supersonic propulsion wind tunnel

Acoustical treatment for the NACA 8- by 6-foot supersonic propulsion wind tunnel

Date: June 1955
Creator: Beranek, Leo L; Labate, Samuel & Ingard, Uno
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Additional static and fatigue tests of high-strength aluminum-alloy bolted joints

Additional static and fatigue tests of high-strength aluminum-alloy bolted joints

Date: July 1, 1954
Creator: Hartmann, E C; Holt, Marshall & Eaton, I D
Description: None
Contributing Partner: UNT Libraries Government Documents Department
The aerodynamic behavior of a harmonically oscillating finite sweptback wing in supersonic flow

The aerodynamic behavior of a harmonically oscillating finite sweptback wing in supersonic flow

Date: October 1, 1951
Creator: Chang, Chieh-Chien
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Aerodynamic characteristics and flying qualities of a tailless triangular-wing airplane configuration as obtained from flights of rocket-propelled models at transonic and supersonic speeds

Aerodynamic characteristics and flying qualities of a tailless triangular-wing airplane configuration as obtained from flights of rocket-propelled models at transonic and supersonic speeds

Date: November 1, 1956
Creator: Mitcham, Grady L; Stevens, Joseph E & Norris, Harry P
Description: A flight investigation of rocket-powered models of a tailless triangular-wing airplane configuration was made through the transonic and low supersonic speed range at the Langley Pilotless Aircraft Research Station at Wallops Island, Va. An analysis of the aerodynamic coefficients, stability derivatives, and flying qualities based on the results obtained from the successful flight tests of three models is presented.
Contributing Partner: UNT Libraries Government Documents Department
Aerodynamic characteristics at Reynolds numbers of 3.0 x 10(exp 6) and 6.0 x 10(exp 6) of three airfoil sections formed by cutting off various amounts from the rear portion of the NACA 0012 airfoil section

Aerodynamic characteristics at Reynolds numbers of 3.0 x 10(exp 6) and 6.0 x 10(exp 6) of three airfoil sections formed by cutting off various amounts from the rear portion of the NACA 0012 airfoil section

Date: April 1, 1950
Creator: Smith, Hamilton A & Schaefer, Raymond F
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Aerodynamic characteristics of a circular cylinder at Mach number 6.86 and angles of attack up to 90 degrees

Aerodynamic characteristics of a circular cylinder at Mach number 6.86 and angles of attack up to 90 degrees

Date: January 1, 1957
Creator: Penland, Jim A
Description: Pressure-distribution and force tests of a circular cylinder have been made in the Langley 11-inch hypersonic tunnel at a Mach number of 6.88, a Reynolds number of 129,000, and angles of attack up to 90 degrees. The results are compared with the hypersonic approximation of Grimminger, Williams, and Young and a simple modification of the Newtonian flow theory. An evaluation of the crossflow theory is made through comparison of present results with available crossflow Mach number drag coefficients.
Contributing Partner: UNT Libraries Government Documents Department
Aerodynamic characteristics of a refined deep-step planing-tail flying-boat hull with various forebody and afterbody shapes

Aerodynamic characteristics of a refined deep-step planing-tail flying-boat hull with various forebody and afterbody shapes

Date: June 1, 1952
Creator: Riebe, John M & Naeseth, Rodger L
Description: An investigation was made in the Langley 300-mph 7- by 10-foot tunnel to determine the aerodynamic characteristics of a refined deep-step planing-tail hull with various forebody and afterbody shapes and, for comparison, a streamline body simulating the fuselage of a modern transport airplane. The results of the tests indicated that the configurations incorporating a forebody with a length-beam ratio of 7 had lower minimum drag coefficients than the configurations incorporating a forebody with length-beam ratio of 5. The lowest minimum drag coefficients, which were considerably less than that of a conventional hull and slightly less than that of a streamline body, were obtained on the length-beam-ratio-7 forebody, alone and with round center boom. Drag coefficients and longitudinal- and lateral-stability parameters presented include the interference of a 21-percent-thick support wing.
Contributing Partner: UNT Libraries Government Documents Department
Aerodynamic characteristics of a small-scale shrouded propeller at angles of attack from 0 to 90 degrees

Aerodynamic characteristics of a small-scale shrouded propeller at angles of attack from 0 to 90 degrees

Date: November 1, 1955
Creator: Parlett, Lysle P
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Aerodynamic characteristics of a two-blade NACA 10-(3)(062)-045 propeller and of a two-blade NACA 10-(3)(08)-045 propeller

Aerodynamic characteristics of a two-blade NACA 10-(3)(062)-045 propeller and of a two-blade NACA 10-(3)(08)-045 propeller

Date: January 1, 1953
Creator: Solomon, William
Description: Characteristics are given for the two-blade NACA 10-(3)(062)-045 propeller and for the two-blade NACA 10-(3)(08)-045 propeller over a range of advance ratio from 0.5 to 3.8, through a blade-angle range from 20 degrees to 55 degrees measured at the 0.75 radius. Maximum efficiencies of the order of 91.5 to 92 percent were obtained for the propellers. The propeller with the thinner airfoil sections over the outboard portion of the blades, the NACA 10-(3)(062)-045 propeller, had lower losses at high tip speeds, the difference amounting to about 5 percent at a helical tip Mach number of 1.10.
Contributing Partner: UNT Libraries Government Documents Department
The aerodynamic characteristics of an aspect-ratio-20 wing having thick airfoil sections and employing boundary-layer control by suction

The aerodynamic characteristics of an aspect-ratio-20 wing having thick airfoil sections and employing boundary-layer control by suction

Date: August 1, 1953
Creator: Cocke, Bennie W , Jr & Fink, Marvin P
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Aerodynamic characteristics of damping screens

Aerodynamic characteristics of damping screens

Date: January 1, 1950
Creator: Schubauer, G B; Spangenberg, W G & Klebanoff, P S
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Aerodynamic characteristics of NACA 0012 airfoil section at angles of attack from 0 degrees to 180 degrees

Aerodynamic characteristics of NACA 0012 airfoil section at angles of attack from 0 degrees to 180 degrees

Date: January 1, 1955
Creator: Critzos, Chris C; Heyson, Harry H & Boswinkle, Robert W , Jr
Description: None
Contributing Partner: UNT Libraries Government Documents Department
FIRST PREV 1 2 3 4 5 NEXT LAST