Technical Report Archive & Image Library (TRAIL) - 38 Matching Results

Search Results

Results: 1 - 24 next
open access

The Analysis of TBP Process Streams for Calcium with the Flame Photometer

Description: Summary: A method was found for determining calcium concentrations in TBP process streams in spite of serious interferences bysodium, ferrous, uranyl, sulfate, phosphate, and sulfamate ions as well as by TBP. The precision attainable varied from sample to sample, depending upon its composition. In general, errors of 20% or greater occurred. The smallest determinable amount of calcium was about 10 mg/1.
Date: February 20, 1953
Creator: Brite, D. W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Chemical Reactivity of Uranium Monocarbide and Uranium Mononitride with Water at 100°C.

Description: The monocarbide and the mononitride of uranium are potentially useful ceramic nuclear fuel materials. This paper reports the results of exploratory investigations of the reactions of uranium monocarbide and uranium mononitride with boiling water. Uranium dioxide, chemically stable in deoxygenated boiling water, was used as a control.
Date: February 26, 1959
Creator: Newkirk, H. W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Chemical Research Section Progress Report for January 1950

Description: The following documents are progress reports that follow chemical research studies in subjects such as ruthenium tetroxile distillations, extraction-scrub studies of zirconium and niobium, and oxidation of plutonium and stabilization of plutonium(VI) during extraction of IAF solutions.
Date: February 15, 1950
Creator: Albaugh, F. W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Concentration and Final Purification of Neptunium by Anion Exchange

Description: It is anticipated that neptunium will be recovered in the Purex process by solvent extraction or ion exchange methods as a nitric acid solution of greater than 0.1 g. Np/1 and containing varying amounts of fission products, plutonium, uranium, and thorium, including Th234 (UX1). At the present time this solution is thermally concentrated in the Purex L-cell package to several grams of neptunium per liter. In this operation the solution is contaminated rather badly with plutonium and stainless s… more
Date: February 10, 1959
Creator: Ryan, J.L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Corrosion Tests on Tantalum, Hastelloy C and Duriron in 234-5 Project Solutions

Description: Introduction: "Room temperature and elevated temperature, static immersion and vapor suspicion, corrosion tests were conducted with Duriron, Hastelloy C, and tantalum in hydriotic acid and 234-5 project process supernatant solution (synthetic environments. The data relevant to these tests are contained herein."
Date: February 25, 1949
Creator: Work, J. B. & Koenig, W. W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Decontamination of Dissolver Vent Gases at Hanford

Description: The preceding report follows an extensive study made at Hanford of methods and equipment to remove effectively the dissolver vent gases.
Date: February 16, 1951
Creator: Blasewitz, A. G.; Carlisle, R. V.; Judson, B. F.; Katzer, M. F.; Kurtz, E. F.; Schmidt, W. C. et al.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Detailed Procedure for K Reactors Rear ace Decontamination by Chemical Flush or the Rear Crossheaders, Pigtails and Nozzles as Authorized by the Production Test Authorization IP-239-N.

Description: The purpose of this procedure is to present a detailed, chronological presentation of the preliminary decontamination and post decontamination steps necessary to fulfill the requirements of the Production Test Authorization IP-239-N. The procedure attempts to present the required operation in sufficient detail to successfully accomplish the intent of the test. Certain procedures involve operations of a standard nature and have not been elaborated upon to any great extent, as it is expected tha… more
Date: February 25, 1959
Creator: Crossman, W.A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Determination of Total Plutonium in the Presence of Aluminum

Description: Introduction: "The adoption of aluminum nitrate as salting agent in the Redox process made it imperative that a method be available for determining plutonium in the presence of aluminum. However, large amounts of aluminum have been found to interfere with the determination of plutonium by the lanthanum fluoride procedure. Previous attempts to increase the accuracy of the lanthanum fluoride method, by precipitating LaF3 from 4 M HF (rather than 2 M), have been successful only when the initial pl… more
Date: February 10, 1950
Creator: Burns, R. E. & Barton, G. B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Development of a Welding Process for End Closures on NPR and KER Fuel Element

Description: With the development of the zircaloy-2 clad uranium fuel element, it was necessary to develop a method of closing the end of the element after the extruded tubes were cut to the desired length. Regardless of the ultimate design of the closure, a satisfactory zircaloy-2 fusion welding technique had to be worked out. The first fully successful welding was performed with electron beam welding in a vacuum chamber. To make satisfactory welds, the electron beam welding involved time and equipment, pl… more
Date: February 22, 1960
Creator: Corey, T. B.; DeWitt, D. E. & Nelson, I. V.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Diameter Measurements of Slugs Before and After Prolonged Heat Treatment

Description: Abstract: "Diameter measurements of 25 slugs taken before and after a prolonged heat treatment showed no evidence of differences that would indicate blistering. The average effects of the treatment was different for the various slugs. Large differences in diameter measurements between slugs. Large differences in diameter between slugs and significant differences between indices and positions were found."
Date: February 16, 1948
Creator: Bennett, Carl A. & Lane, J. J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Disposition of Contaminated Processing Equipment at Hanford Atomic Products Operation 1958-1959

Description: Operating plant experiences in restoring to useful service failed equipment contaminated through exposures to radioactive processes is of international interest to the nuclear industry. In accordance with a request from the Hanford Operations Office of the United States Atomic Energy Commission this report of the various measures taken in rehabilitating for re-use expensive engineered equipment has been compiled by the General Electric Company. This report is a review and summary of the dispos… more
Date: February 12, 1960
Creator: Kingsley, P. S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Effects of Furnance Pressures on Quality of Remelted Uranium : Final Report, Production Test 314-59-M

Description: The following report follows a test for remelting and casting uranium scrap specified that a pressure of 25 microns or less must be attained within the furnace before a charge is melted. The report was made to evaluate the effect of furnace pressures upon the quality if recast uranium metal.
Date: February 15, 1951
Creator: Kattner, W. T.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Evaluation of Fretting Corrosion of ZR-2

Description: Although the corrosion of resistance of Zircaloy--2 clad fuel elements in high temperature water is excellent, some concern has been expressed in regard to the resistance against fretting corrosion. Since this form of corrosion can proceed quite rapidly it could induce fuel element failure through penetration of the cladding. Fretting corrosion if it occurred, would take place either where the fuel element contacted the process tube or where portions of the fuel element contacted each other, e.… more
Date: February 5, 1960
Creator: Lobsinger, R. J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Flow Decay After an Electrical Power Outage in the PRTR

Description: Previously, W. S. Figg and T. W. Ambrose (HW-51767 Rev) have investigated the problem of flow decay following electrical power loss to the PRTR primary coolant pumps. However, since the time of their study many reactor piping changes have been made in the design; therefore, it has become advisable to re-examine the problem incorporating these changes.
Date: February 6, 1959
Creator: Muraoka, J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Gas-Graphite Reactions. I. Thermal and Microwave Oxidation of Various Reactor-Grade Graphites*

Description: Thermal oxidation of graphite in flowing CO2 is being studied at 650 to 850 C, in a single-pass gas system at atmospheric pressure, by observing weight loss rates. The method is used to provide comparative data for candidate reactor graphites. The effects on oxidation rates of graphite purity, structure, coke type, graphitization temperatures and other manufacturing variables are determined. In addition, the effects of gas flow rates and graphite surface to volume ratios are observed.
Date: February 10, 1960
Creator: Clark, T. J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Hanford Works Analytical Manual for Reactor Process Water

Description: Purpose: "The Hanford Works Analytical Manual for Process Water is designed to specify the analytical methods to be applied for control purposes in the Reactor Section, Process Sub-Section laboratories. The procedures are in general form and serve as references rather than outlined laboratory instructions. The manual us designed to replace the "Hanford Works Manual," HW-12862."
Date: February 13, 1953
Creator: Hanford Works
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Heat Transfer in Radiant- Heat Spray Calcination

Description: The fixation of aqueous radioactive wastes in a stable solid media by means of calcination has been the subject of considerable research and development effort. Several methods of doing this on a continuous basis have been devised and a few have been demonstrated to be feasible for the handling of non-radioactive or low activity simulated wastes. Currently an investigation of calcination by means of radiant-heat spray drying is being carried on by the Chemical Research Operation of the Hanford … more
Date: February 1, 1959
Creator: Johnson, B.M., Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Hydraulic System Flow Decay Relations During Loss of External Power

Description: Over the last decade, several computational methods have been developed and used to examine reactor flow transients caused by pump outage. The variations in system character which have been analyzed are sufficiently diverse that it appears worthwhile to compile them into a single report.
Date: February 11, 1960
Creator: Love, W. J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Interim Report -- The Retention of Particles in Ducts Transporting Aerosol Streams

Description: Accurate sampling of particulate in gaseous effluents is required for auditing and control of radioactive wastes released to the environment at installations generating or processing radioactive materials. Over the years a variety of sampling probe configurations, sampling velocities, lengths and sizes of sample delivery lines have been used locally to obtain these samples. Efforts to properly evaluate the validity of samples in most sampling installations have been hampered by a lack of basic … more
Date: February 1, 1960
Creator: Postma, A. K. & Schwendiman, L. C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Irradiated Rupture Prototype (IRP) Design

Description: One of the problems involved in the design of NPR is the method to be used for decontamination, Considerable effort has been made in both laboratories and pilot plants in developing and evaluating decontamination processes under ideal conditions. Promising processes must be tested under prototypical conditions of velocity, water quality, manner of make-up, type and degree of contamination, addition of decontaminating solutions, and so on.
Date: February 15, 1960
Creator: Neibaur, G. E. & Stice, N. D.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

KAPL-120-8A Test Assembly Thermocouple Failure.

Description: This document reports the circumstances surrounding the failure of sheathed thermocouples during a test being conducted in the KAPL-120 Loop. The report is prepared to provide a record of these events and to acquaint those who use these thermocouples for testing of other applications with the difficulties that are sometimes encountered.
Date: February 5, 1960
Creator: Dearing, F. E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen