You limited your search to:

 Collection: National Advisory Committee for Aeronautics Collection
Additional design charts relating to the stalling of tapered wings

Additional design charts relating to the stalling of tapered wings

Date: January 1943
Creator: Harmon, Sidney M
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Additional experimental heat-transfer and durability data on several forced-convection, air-cooled, strut-supported turbine blades of improved design

Additional experimental heat-transfer and durability data on several forced-convection, air-cooled, strut-supported turbine blades of improved design

Date: January 19, 1955
Creator: Schum, Eugene F
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Additional experiments with flat-top wing- body combinations at high supersonic speeds

Additional experiments with flat-top wing- body combinations at high supersonic speeds

Date: February 19, 1957
Creator: Gloria, H. R.; Syvertson, C. A. & Wong, T. J.
Description: Flat top wing body configuration effects on aerodynamic characteristics of supersonic aircraft.
Contributing Partner: UNT Libraries Government Documents Department
Additional fatigue tests on effects of design details in 355-T6 sand-cast aluminum alloy

Additional fatigue tests on effects of design details in 355-T6 sand-cast aluminum alloy

Date: March 10, 1954
Creator: Eaton, I D & Youra, John A
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Additional free-flight tests of the rolling effectiveness of several wing-spoiler arrangements at high subsonic, transonic, and supersonic speeds

Additional free-flight tests of the rolling effectiveness of several wing-spoiler arrangements at high subsonic, transonic, and supersonic speeds

Date: November 24, 1948
Creator: Strass, H Kurt
Description: None
Contributing Partner: UNT Libraries Government Documents Department
An additional investigation of the high-speed lateral-control characteristics of spoilers

An additional investigation of the high-speed lateral-control characteristics of spoilers

Date: June 1945
Creator: Summers, James
Description: None
Contributing Partner: UNT Libraries Government Documents Department
The additional-mass effect of plates as determined by experiments

The additional-mass effect of plates as determined by experiments

Date: 1941
Creator: Gracey, William
Description: The apparent increase in the inertia properties of a body moving in a fluid medium has been called the additional-mass effect. This report presents a resume of test procedures and results of experimental determinations of the additional-mass effect of flat plates. In addition to data obtained from various foreign sources and from a NACA investigation in 1933, the results of tests recently conducted by the National Advisory Committee for Aeronautics are included.
Contributing Partner: UNT Libraries Government Documents Department
Additional measurements of the low-speed static stability of a configuration employing three triangular wing panels and a body of equal length

Additional measurements of the low-speed static stability of a configuration employing three triangular wing panels and a body of equal length

Date: July 25, 1955
Creator: Delany, Noel K
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Additional power-on wind-tunnel tests of the 1/8-scale model of the Brewster F2A airplane with full-span slotted flaps

Additional power-on wind-tunnel tests of the 1/8-scale model of the Brewster F2A airplane with full-span slotted flaps

Date: October 1941
Creator: Lowry, John G
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Additional results in a free-flight investigation of control effectiveness of full-span, 0.2-chord plain ailerons at high subsonic, transonic, and supersonic speeds to determine some effects of wing sweepback, aspect ratio, taper, and section thickne

Additional results in a free-flight investigation of control effectiveness of full-span, 0.2-chord plain ailerons at high subsonic, transonic, and supersonic speeds to determine some effects of wing sweepback, aspect ratio, taper, and section thickne

Date: April 23, 1948
Creator: Sandahl, Carl A & Strass, H Kurt
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Additional results of an investigation at transonic speeds to determine the effects of a heated propulsive jet on the drag characteristics of a series of related afterbodies

Additional results of an investigation at transonic speeds to determine the effects of a heated propulsive jet on the drag characteristics of a series of related afterbodies

Date: September 24, 1956
Creator: Henry, Beverly Z JR & Cahn, Maurice S
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Additional Results on the Static Longitudinal and Lateral Stability Characteristics of a 0.05-Scale Model of the Convair F2Y-1 Airplane at High Subsonic Speeds

Additional Results on the Static Longitudinal and Lateral Stability Characteristics of a 0.05-Scale Model of the Convair F2Y-1 Airplane at High Subsonic Speeds

Date: August 10, 1954
Creator: Spreeman, Kenneth P. & Few, Albert G.
Description: Additional results on the static longitudinal and lateral stability characteristics of a 0.05-scale model of the Convair F2Y-1 water-based fighter airplane were obtained in the Langley high-speed 7- by 10-foot tunnel over a Mach number range of 0.50 to 0.92. The maximum angle-of-attack range (obtained at the lower Mach numbers) was from -2 degrees to 25 degrees. The sideslip-angle range investigated was from -4 degrees to 12 degrees. The investigation included effects of various arrangements of wing fences, leading-edge chord-extensions, and leading-edge notches. Various fuselage fences, spoilers, and a dive brake also were investigated. From overall considerations of lift, drag, and pitching moments, it appears that there were two modifications somewhat superior to any of the others investigated: One was a configuration that employed a full-chord fence and a partial-chord fence located at 0.63 semispan and 0.55 semispan, respectively. The second was a leading-edge chord-extension that extended from 0.68 semispan to 0.85 semispan in combination with a leading-edge notch located at 0.68 semispan. With plus or minus 10 degrees aileron, the estimated wing-tip helix angle was reduced from 0.125 at a Mach number of 0.50 to 0.088 at a Mach number of 0.92, with corresponding rates of roll of 4.0 ...
Contributing Partner: UNT Libraries Government Documents Department
Additional static and fatigue tests of high-strength aluminum-alloy bolted joints

Additional static and fatigue tests of high-strength aluminum-alloy bolted joints

Date: July 1954
Creator: Hartmann, E C; Holt, Marshall & Eaton, I D
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Additional Studies of the Stability and Controllability of an Unswept-Wing Vertically Rising Airplane Model in Hovering Flight Including Studies of Various Tethered Landing Techniques

Additional Studies of the Stability and Controllability of an Unswept-Wing Vertically Rising Airplane Model in Hovering Flight Including Studies of Various Tethered Landing Techniques

Date: November 6, 1951
Creator: Bates, William R.; Lovell, Powell M., Jr. & Smith, Charles C., Jr.
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Additional test data on static longitudinal stability

Additional test data on static longitudinal stability

Date: August 1934
Creator: Hubner, Walter
Description: The purpose of this investigation was to explore the influence of weights of the controls on the stability with elevator released. The available test data were extended to stability with elevator locked. In this connection the study of the propeller effect seemed of vital importance.
Contributing Partner: UNT Libraries Government Documents Department
Adhesion of ice in its relation to the de-icing of airplanes

Adhesion of ice in its relation to the de-icing of airplanes

Date: August 1939
Creator: Rothrick, A M & Selden, R
Description: The various possible means of preventing ice adhesion on airplane surfaces are critically reviewed. Results are presented of tests of the adhesives forces between ice and various solid and liquid forces. It is concluded that the de-icing of airplane wings by heat from engine exhaust shows sufficient promise to warrant full-scale tests. For propellers, at least, and possibly for certain small areas such as windshields, radio masts, etc. the use of de-icing or adhesion-preventing liquids will provide the best means of protection.
Contributing Partner: UNT Libraries Government Documents Department
The adhesion of molten boron oxide to various materials

The adhesion of molten boron oxide to various materials

Date: April 1, 1958
Creator: Witzke, W R
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Adhesive and protective characteristics of ceramic coating A-417 and its effect on engine life of forged Refractaloy-26 (AMS 5760) and cast stellite 21 (AMS 5385) turbine blades

Adhesive and protective characteristics of ceramic coating A-417 and its effect on engine life of forged Refractaloy-26 (AMS 5760) and cast stellite 21 (AMS 5385) turbine blades

Date: February 12, 1953
Creator: Garrett, Floyd B & Gyorgak, Charles A
Description: The adhesive and protective characteristics of National Bureau of Standards Coating A-417 were investigated, as well as the effect of the coating on the life of forged Refractaloy 26 and cast Stellite 21 turbine blades. Coated and uncoated blades were run in a full-scale J33-9 engine and were subjected to simulated service operations consisting of consecutive 20-minute cycles (15 min at rated speed and approximately 5 min at idle). The ceramic coating adhered well to Refractaloy 26 and Stellite 21 turbine blades operated at 1500 degrees F. The coating also prevented corrosion of the Refractaloy 26, a corrosion-sensitive nickel-base alloy, and of the Stellite 21, a relatively corrosion-resistant cobalt-base alloy. Although the coating prevented corrosion of both alloys, it had no apparent effect on blade life.
Contributing Partner: UNT Libraries Government Documents Department
Adjustment of stick force by a nonlinear aileron-stick linkage

Adjustment of stick force by a nonlinear aileron-stick linkage

Date: November 1942
Creator: Lowry, John G
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Advantages of oxide films as bases for aluminum pigmented surface coatings for aluminum alloys

Advantages of oxide films as bases for aluminum pigmented surface coatings for aluminum alloys

Date: November 1931
Creator: Buzzard, R W & Mutchler, W H
Description: Both laboratory and weather-exposure corrosion tests showed conclusively that the protection afforded by aluminum pigmented spar varnish coatings applied to previously anodized aluminum surfaces was greatly superior to that afforded by the same coatings applied to surfaces which had simply been cleaned free from grease and not anodized.
Contributing Partner: UNT Libraries Government Documents Department
The advantages of uniform fuel distribution for air-cooled engines from considerations of cooling requirements and fuel economy

The advantages of uniform fuel distribution for air-cooled engines from considerations of cooling requirements and fuel economy

Date: December 1943
Creator: Nielson, Jack
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Aerial convention of October 13, 1919

Aerial convention of October 13, 1919

Date: May 1922
Creator: Roper,
Description: The aerial convention delegates are listed as well as the set of rules that were developed during the session.
Contributing Partner: UNT Libraries Government Documents Department
Aerial navigation by dead reckoning

Aerial navigation by dead reckoning

Date: July 1922
Creator: Maffert, Pierre
Description: The problem to be solved, as presented to the pilot or observer of an aircraft, is as follows: The aircraft starting from A must land at B, the only data being the speed of the airplane, the altitude and the orientation D of the course. The above data would be amply sufficient, were it not for the fact that the airplane is constantly subjected to a wind of variable direction and strength.
Contributing Partner: UNT Libraries Government Documents Department
Aerial navigation : on the problem of guiding aircraft in a fog or by night when there is no visibility

Aerial navigation : on the problem of guiding aircraft in a fog or by night when there is no visibility

Date: January 1922
Creator: Loth, William
Description: The use of magnetic fields and wire to navigate aircraft in conditions of poor visibility is presented. This field may be considered to be derived from a double lemniscate, considered in the particular case where the origin is a double point formed from the magnetic field of the slack wire, from the field produced by the return currents and from the field due to the currents induced in the conducting mass. These fields are dephased in two ways, one in the direction of the wire, the other in a direction perpendicular to it.
Contributing Partner: UNT Libraries Government Documents Department