You limited your search to:

  Partner: UNT Libraries Government Documents Department
 Collection: National Advisory Committee for Aeronautics Collection
Abnormal grain growth in S-816 alloy

Abnormal grain growth in S-816 alloy

Date: April 1, 1952
Creator: Rush, A I
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Absolute coefficients and the graphical representation of airfoil characteristics

Absolute coefficients and the graphical representation of airfoil characteristics

Date: June 1, 1921
Creator: Munk, Max
Description: It is argued that there should be an agreement as to what conventions to use in determining absolute coefficients used in aeronautics and in how to plot those coefficients. Of particular importance are the absolute coefficients of lift and drag. The author argues for the use of the German method over the kind in common use in the United States and England, and for the Continental over the usual American and British method of graphically representing the characteristics of an airfoil. The author notes that, on the whole, it appears that the use of natural absolute coefficients in a polar diagram is the logical method for presentation of airfoil characteristics, and that serious consideration should be given to the advisability of adopting this method in all countries, in order to advance uniformity and accuracy in the science of aeronautics.
Contributing Partner: UNT Libraries Government Documents Department
Absolute dimensions of Karman vortex motion

Absolute dimensions of Karman vortex motion

Date: January 1, 1923
Creator: Heisenberg, Werner
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Absorbing landing shocks

Absorbing landing shocks

Date: August 1, 1923
Creator: Warner, Edward P
Description: Tires, steel springs, hydraulic shock absorbers, and axle travel are all examined in relation to absorbing landing shocks.
Contributing Partner: UNT Libraries Government Documents Department
Abstracts pertaining to seaplanes

Abstracts pertaining to seaplanes

Date: July 24, 1947
Creator: Bidwell, Jerold M
Description: About 400 references pertaining to the hydrodynamic design of seaplanes have been compiled, and the information is presented in the form of abstracts classified under six main headings.
Contributing Partner: UNT Libraries Government Documents Department
Acceleration characteristics of a turbojet engine with variable-position inlet guide vanes

Acceleration characteristics of a turbojet engine with variable-position inlet guide vanes

Date: July 7, 1955
Creator: Dobson, W F
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Acceleration Characteristics of R-3350 Engine Equipped with NACA Injection Impeller

Acceleration Characteristics of R-3350 Engine Equipped with NACA Injection Impeller

Date: January 8, 1947
Creator: Hickel, Robert O.
Description: Qualitative investigations have shown that use of the NACA injection impeller with the R-3350 engine increases the inertia of the fuel-injection system and, when the standard fuel-metering system is used, this increase in inertia results in poor engine acceleration characteristics. This investigation was therefore undertaken to determine whether satisfactory acceleration characteristics of the engine equipped with the injection impeller could be obtained by simple modifications to the fuel-monitoring system. The engine was operated with two types of carburetor; namely, a hydraulic-metering carburetor incorporating a vacuum-operated accelerating pump and a direct-metering carburetor having a throttle-actuated accelerating pump. The vacuum-operated accelerating pump of the hydraulic-metering carburetor was modified to produce satisfactory accelerations by supplementing the standard air chamber with an additional 75-cubic spring. The throttle-actuated accelerating pump of the direct-metering carburetor was modified to produce satisfactory accelerations by replacing the standard 0.028-inch-diameter bleed in the load-compensator balance line with a smaller bleed of 0.0225-inch diameter. The results of this investigation indicated that both carburetors can be easily modified to produce satisfactory acceleration characteristics of the engine and no definite choice between the types of carburetor and accelerating pump can be made. Use of the direct-metering carburetor, however, probably resulted in better fuel ...
Contributing Partner: UNT Libraries Government Documents Department
Acceleration Measurements During Landing in Rough Water of a 1/7-Scale Dynamic Model of Grumman XJR2F-1 Amphibian - Langley Tank Model 212, TED No. NACA 2378

Acceleration Measurements During Landing in Rough Water of a 1/7-Scale Dynamic Model of Grumman XJR2F-1 Amphibian - Langley Tank Model 212, TED No. NACA 2378

Date: May 6, 1947
Creator: Land, Norman S.
Description: Tests of a 1/7 size model of the Grumman XJR2F-1 amphibian were made in Langley tank no.1 to examine the landing behavior in rough water and to measure the normal and angular accelerations experienced by the model during these landings. All landings were made normal to the direction of wave advance, a condition assumed to produce the greatest accelerations. Wave heights of 4.4 and 8.0 inches (2.5 and 4.7 ft, full size) were used in the tests and the wave lengths were varied between 10 and 50 feet (70 and 350 ft, full size). Maximum normal accelerations of about 6.5g were obtained in 4.4 inch waves and 8.5g were obtained in 8.0 inch waves. A maximum angular acceleration corresponding to 16 radians per second per second, full size, was obtained in the higher waves. The data indicate that the airplane will experience its greatest accelerations when landing in waves of about 20 feet (140 ft, full size) in length.
Contributing Partner: UNT Libraries Government Documents Department
Acceleration Measurements During Landings of a 1/5.5-Size Dynamic Model of the Columbia XJL-1 Amphibian in Smooth Water and in Waves: Langley Tank Model 208M, TED No. NACA 2336

Acceleration Measurements During Landings of a 1/5.5-Size Dynamic Model of the Columbia XJL-1 Amphibian in Smooth Water and in Waves: Langley Tank Model 208M, TED No. NACA 2336

Date: September 25, 1947
Creator: Clement, Eugene P.
Description: A 1/5.5-size powered dynamic model of the Columbia XJL-1 amphibian was landed in Langley tank no. 1 in smooth water and in oncoming waves of heights from 2.1 feet to 6.4 feet (full-size) and lengths from 50 feet to 264 feet (full-size). The motions and the vertical accelerations of the model were continuously recorded. The greatest vertical acceleration measured during the smooth-water landings was 3.1g. During landings in rough water the greatest vertical acceleration measured was 15.4g, for a landing in 6.4-foot by 165-foot waves. The impact accelerations increased with increase in wave height and, in general, decreased with increase in wave length. During the landings in waves the model bounced into the air at stalled attitudes at speeds below flying speed. The model trimmed up to the mechanical trim stop (20 deg) during landings in waves of heights greater than 2.0 feet. Solid water came over the bow and damaged the propeller during one landing in 6.4-foot waves. The vertical acceleration coefficients at first impact from the tank tests of a 1/5.5-size model were in fair agreement with data obtained at the Langley impact basin during tests of a 1/2-size model of the hull.
Contributing Partner: UNT Libraries Government Documents Department
Acceleration of high-pressure-ratio single-spool turbojet engine as determined from component performance characteristics : effect of compressor interstage air bleed

Acceleration of high-pressure-ratio single-spool turbojet engine as determined from component performance characteristics : effect of compressor interstage air bleed

Date: July 3, 1953
Creator: Rebeske, John J , Jr
Description: None
Contributing Partner: UNT Libraries Government Documents Department