Search Results

open access

An Acceleration Schedule Control for Accelerating a Turbojet Engine and Its Use With a Speed Control

Description: Memorandum presenting a study of an acceleration-limiting control on a turbojet engine in order to determine its feasibility as an acceleration control. A proportional-plus-integral type of controller was used in the investigation. Results regarding the one-loop control and two-loop control are provided.
Date: May 12, 1958
Creator: Gerus, Theodore F.; Powers, Albert G. & Heppler, Herbert J.
Partner: UNT Libraries Government Documents Department
open access

An Acceleration Schedule Control for Accelerating a Turbojet Engine and Its Use With a Speed Control

Description: Memorandum presenting an acceleration-limiting control used on a turbojet engine to study the feasibility of its use as an acceleration control. A proportional-plus-integral type of controller was used in this investigation. Results regarding one-loop control and two-loop control are provided.
Date: May 12, 1958
Creator: Gerus, Theodore F.; Powers, Albert G. & Heppler, Herbert J.
Partner: UNT Libraries Government Documents Department
open access

Accelerations in Transport-Airplane Crashes

Description: From Introduction: "A study of crash-impact survival in light airplanes is reported in references 1 and 2. A similar study for fighter airplanes is reported in reference 3. This report discusses crash-impact survival in transport airplanes."
Date: February 1958
Creator: Preston, G. Merritt & Pesman, Gerard J.
Partner: UNT Libraries Government Documents Department
open access

Acoustic, thrust, and drag characteristics of several full-scale noise suppressors for turbojet engines

Description: From Introduction: " Considerable analytical and experimental research has been done to find means of reducing the noise levels of the turbojet transports. Noise levels can be decreased by engine redesign to reduce the jet-exit velocity (ref. 1), proper flight-climb techniques (ref. 2), and the use of noise-suppression exhaust nozzles (refs. 3 to 5). The present report is concerned with the last method."
Date: April 1958
Creator: Ciepluch, Carl C.; North, Warren J.; Coles, Willard D. & Antl, Robert J.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic and inlet-flow-field characteristics at a free-stream Mach number of 3.0 for airplanes with circular fuselage cross sections and for two engine locations

Description: Report presenting an experimental investigation of several airplane configurations at Mach 3.0 in a continuous flow tunnel. The configurations had circular fuselage cross sections and a sweptback wing and either two nacelles or two side inlets.
Date: March 18, 1958
Creator: Dryer, Murray & Luidens, Roger W.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Characteristics at a Mach Number of 6.8 of Two Hypersonic Missile Configurations, One With Low-Aspect-Ratio Cruciform Fins and Trailing-Edge Flaps and One With a Flared Afterbody and All-Movable Controls

Description: Report presenting an investigation to determine the aerodynamic characteristics in pitch at a Mach number of 6.8 of hypersonic missile configurations with cruciform trailing-edge flaps and all-movable control surfaces. Testing indicated that all-movable controls on the flared-afterbody model should be capable of producing much larger values of trim lift and of normal acceleration than the trailing-edge-flap configuration. Some of the configurations tested include body alone, body with 5 degree … more
Date: August 4, 1958
Creator: Robinson, Ross B. & Bernot, Peter T.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Characteristics at a Mach Number of 6.8 of Two Hypersonic Missile Configurations, One With Low-Aspect-Ratio Cruciform Fins and Trailing-Edge Flaps and One With a Flared Afterbody and All-Movable Controls

Description: Report discussing an investigation to determine the aerodynamic characteristics of hypersonic missile configurations with cruciform trailing-edge flaps with all-movable control surfaces. The all-movable controls were found to produce much larger values of trim lift and normal acceleration than the trailing-edge-flap configuration.
Date: August 4, 1958
Creator: Robinson, Ross B. & Bernot, Peter T.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic characteristics at Mach numbers 2.36 and 2.87 of an airplane configuration having a cambered arrow wing with a 75 degree swept leading edge

Description: From Introduction: "The results obtained in the wind-tunnel tests at Mach numbers 2.36 and 2.87 for several configurations utilizing this wing, including results on the wing alone are presented."
Date: August 4, 1958
Creator: Hallissy, Joseph M., Jr. & Hasson, Dennis F.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Characteristics at Mach Numbers From 2.5 to 3.5 of a Canard Bomber Configuration Designed for Supersonic Cruise Flight

Description: Report presenting an investigation of a canard-type configuration designed for supersonic cruise flight in the Unitary Plan wind tunnel. Tests were conducted over a range of angles of attack and angles of sideslip. Results regarding the effect of forebody configuration, effects of Reynolds number and transition, effect of canard and elevon deflection, and effect of vertical surfaces are provided.
Date: September 10, 1958
Creator: Carmel, Melvin M.; Kelly, Thomas C. & Gregory, Donald T.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Characteristics of a 45 Degree Swept Wing Fighter Airplane Model and Aerodynamic Loads on Adjacent Stores and Missiles at Mach Numbers of 1.57, 1.87, 2.16, and 2.53

Description: Report discussing tests to determine the aerodynamic characteristics of a model of a 45 degree swept-wing fighter airplane and to determine the loads on attached stores and detached missiles. An investigation into aileron-spoiler effectiveness, aileron hinge moments, and the effects of wing modifications of aerodynamic characteristics was also carried out at various Mach numbers. Results are presented, but caution is provided in regards to extrapolating results from the model onto a full-scale … more
Date: June 24, 1958
Creator: Oehman, Waldo I. & Turner, Kenneth L.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Characteristics of a 45 Degree Swept-Wing Fighter-Airplane Model and Aerodynamic Loads on Adjacent Stores and Missiles at Mach Numbers of 1.57, 1.87, 2.16, and 2.53

Description: Memorandum presenting an investigation in the Unitary Plan wind tunnel to determine the aerodynamic characteristics of a model of a 45 degree swept-wing fighter airplane, and to determine the loads on attached stores and detached missiles in the presence of the model. Results also included a determination of aileron-spoiler effectiveness, aileron hinge moments, and the effects of wing modifications on model aerodynamic characteristics. The results are presented with minimum analysis.
Date: June 24, 1958
Creator: Oehman, Waldo I. & Turner, Kenneth L.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic characteristics of a canard and an outboard-tail airplane model at a Mach number of 2.01

Description: From Introduction: "In order to obtain some insight into the relative merits of canard and outboard-tail control systems at supersonic speeds, a preliminary investigation of a generalized canard and outboard-tail model has been conducted in the Langley 4- by 4-foot supersonic pressure tunnel at a Mach number of 2.01 and the results are presented herein."
Date: March 24, 1958
Creator: Spearman, M. Leroy & Robinson, Ross B.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic characteristics of several jet-spoiler controls on a 45 degree sweptback wing at Mach numbers of 1.61 and 2.01

Description: Report presenting an investigation in the supersonic pressure tunnel at two Mach numbers to determine the aerodynamic characteristics of several jet-spoiler controls on a wing having a 45 degree sweepback of the quarter-chord line, an aspect ratio of 3.5, a taper ratio of 0.3, and an NACA 65A005 airfoil section. Testing indicated that the jet-spoiler effectiveness increased with increasing angle of attack and correlated well with the momentum of jet flow.
Date: June 24, 1958
Creator: Lord, Douglas R.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Effects Caused by Icing of an Unswept NACA 65A004 Airfoil

Description: From Summary: "The effects of ice formations on the section lift, drag, and pitching-moment coefficients of an unswept NACA 65A004 airfoil section of 6-foot chord were studied.. The magnitude of the aerodynamic penalties was primarily a function of the shape and size of the ice formation near the leading edge of the airfoil. The exact size and shape of the ice formations were determined photographically and found to be complex functions of the operating and icing conditions."
Date: February 1958
Creator: Gray, Vernon H. & von Glahn, Uwe H.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Heating of Blunt Nose Shapes at Mach Numbers Up to 14

Description: From Introduction: "The importance of blunt noses as a means of reducing the heat transfer to high velocity missiles has recently received much publicity. The question of just what blunt shape is best is still moot, and it is the purpose of this paper to present and examine some recent experimental results which may throw some light on this problem."
Date: August 11, 1958
Creator: Stoney, William E., Jr.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic heating of blunt nose shapes at Mach numbers up to 14

Description: From Introduction: "The importance of blunt noses as a means of reducing the heat transfer to high velocity missiles has recently received much publicity. The question of just what blunt shape is best is still moot, and it is the purpose of this paper to present and examine some recent experimental results which may throw some light on the problem."
Date: August 11, 1958
Creator: Stoney, William E., Jr.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Load Distribution on a 45 Degree Sweptback Wing With Leading-Edge Chord-Extensions at Transonic Speeds, Including Effects of a Spoiler-Slot-Deflector Aileron

Description: Report discussing the aerodynamic loading characteristics of a 45 degree sweptback wing with leading-edge chord extensions, including the effects of a spoiler-slot-deflector aileron. The wing section loading, wing-panel loading, and chord-extension loading are described.
Date: February 20, 1958
Creator: Schmeer, James W.; Whitcomb, Charles F. & West, F. E., Jr.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Performance and Static Stability and Control of Flat-Top Hypersonic Gliders at Mach Numbers From 0.6 to 18

Description: Memorandum presenting a study of aerodynamic performance and static stability and control at hypersonic speeds. In the first part of the study, the effect of interference lift is investigated by tests of asymmetric models with conical fuselages and arrow plan-form wings. In the second part, the aerodynamic performance and static stability and control characteristics of a hypersonic glider are investigated in somewhat greater detail.
Date: September 17, 1958
Creator: Syvertson, Clarence A.; Gloria, Hermilo R. & Sarabia, Michael F.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Research on Fuselages with Rectangular Cross Section

Description: The influence of the deflected flow caused by the fuselage (especially by unsymmetrical attitudes) on the lift and the rolling moment due to sideslip has been discussed for infinitely long fuselages with circular and elliptical cross section. The aim of this work is to add rectangular cross sections and, primarily, to give a principle by which one can get practically usable contours through simple conformal mapping. In a few examples, the velocity field in the wing region and the induced flow p… more
Date: July 1958
Creator: Maruhn, K.
Partner: UNT Libraries Government Documents Department
open access

Altitude Performance of the Afterburner on the Iroquois Turbojet Engine. Coord. No. AF-P-6

Description: "The performance and operational characteristics of two afterburner configurations for the Iroquois turbojet engine were evaluated in an altitude test chamber over a range of afterburner equivalence ratios at afterburner-inlet pressures from 733 to 3186 pounds per square foot absolute. These conditions correspond to an altitude range from 38,700 to 66,800 feet at a flight Mach number of 1.5. The only difference between the two afterburner configurations was in the pattern of afterburner fuel in… more
Date: July 28, 1958
Creator: Groesbeck, Donald E. & Peters, Daniel J.
Partner: UNT Libraries Government Documents Department
open access

An Analog Study of the Influence of Internal Modifications to a Wing Leading Edge on Its Transient Temperature Rise During Highspeed Flight

Description: Memorandum presenting an investigation made with an electrical heat-flow analog to determine the effect of internal modifications to a wing leading edge on the surface-temperature rise and temperature distribution for conditions of transient aerodynamic heating at high supersonic speeds. Results regarding the leading-edge temperature rise, influence of conduction on leading-edge temperature for skins of uniform thickness, and surface-temperature distribution are provided.
Date: March 17, 1958
Creator: Neel, Carr B.
Partner: UNT Libraries Government Documents Department
open access

Analysis of effects of interceptor roll performance and maneuverability on success of collision-course attacks

Description: From Introduction: "In the present paper, calculations are presented to show the relative effects of wide variations in the roll performance and normal-accleration capability. Brief analyses are also included to show the effect on the success of attacks of other design factors such as speed and radar range."
Date: August 6, 1958
Creator: Phillips, William H.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen