National Advisory Committee for Aeronautics (NACA) - 6,928 Matching Results

Search Results

Results: 1 - 24 next
open access

Two-dimensional subsonic compressible flows past arbitrary bodies by the variational method

Description: Instead of solving the nonlinear differential equation which governs the compressible flow, an approximate method of solution by means of the variational method is used. The general problem of steady irrotational flow past an arbitrary body is formulated. Two examples were carried out, namely, the flow past a circular cylinder and the flow past a thin curved surface. The variational method yields results of velocity and pressure distributions which compare excellently with those found by existi… more
Date: March 1951
Creator: Wang, Chi-Teh
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Tables for the Computation of Wave Drag of Arrow Wings of Arbitrary Airfoil Section

Description: Tables and computing instructions for the rapid evaluation of the wave drag of delta wings and of arrow wings having a ration of the tangent of the trailing-edge sweep angle to the tangent of the leading-edge sweep angle in the range from -1.0 to 0.8. The tables cover a range of both subsonic and supersonic leading edges.
Date: June 1954
Creator: Grant, Frederick C. & Cooper, Morton
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Average Outside-Surface Heat-Transfer Coefficients and Velocity Distributions for Heated and Cooled Impulse Turbine Blades in Static Cascades

Description: Heat-transfer investigation conducted on cooled as well heated impulse-type turbine blades in a static cascade to determine the effect of direction of heat flow on convective heat-transfer coefficients.
Date: March 9, 1951
Creator: Hubbartt, James E. & Schum, Eugene F.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Investigations toward simplification of missile control systems

Description: Paper presenting three ideas regarding potential simplifications of missile-control systems in order to make them more reliable without sacrificing system performance. The three methods presented include an autorotating-vane spoiler, a bellows flap, and free controls. All are based on modified airplane control systems.
Date: November 12, 1953
Creator: Curfman, Howard J., Jr.; Strass, H. Kurt & Crane, Harold L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Comparison of the performance of a helicopter-type ram-jet engine under various centrifugal loadings

Description: Report presenting an investigation of an 18-foot-radius helicopter rotor powered by tip-mounted ramjet engines in the helicopter test tower. The engine performance is compared with the performance determined in a previous investigation of a 9-foot-radius rotor with the same engines at similar speeds but with twice the centrifugal forces. Results regarding the propulsive characteristics, minimum specific fuel consumption and corresponding propulsive thrust, and operational characteristics are pr… more
Date: October 7, 1953
Creator: Radin, Edward J. & Carpenter, Paul J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Large-scale low-speed wind-tunnel tests of a model having a 60 degree delta horizontal canard control surface and wing to obtain static-longitudinal-stability and canard surface hinge-moment data

Description: Report presenting a wind-tunnel investigation of a model equipped with a 60 degree delta wing and a 60 degree delta horizontal all-movable canard control surface to determine the stability, control, and canard-surface hinge-moment characteristics at low speeds and at a Reynolds number of 9 x 10(exp 6). Two longitudinal positions of the canard surface were tested. Results regarding lift and pitching moment, drag, and hinge moment are provided.
Date: June 17, 1954
Creator: Burrows, Dale L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel Investigation to Determine the Horizontal- and Vertical-Tail Contributions to the Static Lateral Stability Characteristics of a Complete-Model Swept-Wing Configuration at High Subsonic Speeds

Description: Results regarding an investigation to determine the horizontal- and vertical-tail contributions to the static lateral stability of a complete-model swept-wing configuration at high subsonic speeds. Generally, Mach number effects within the range studied and wing effects on the tail contribution were small and the overall trends of the data of the present investigation agreed with those which have been established at low speeds.
Date: July 10, 1953
Creator: Wiggins, James W.; Kuhn, Richard E. & Fournier, Paul G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Reciprocity relations in aerodynamics

Description: From Introduction: "The purpose of the present paper is twofold. First, a close connection will be established between reverse-flow theorems in subsonic and supersonic, steady-state wing theory and known reciprocity relations between two solutions of the equation the flow field."
Date: May 1952
Creator: Heaslet, Max A. & Spreiter, John R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Rocket-Model Investigation to Determine the Hinge-Moment and Normal-Force Properties of a Full-Span, Constant-Chord, Partially Balanced Trailing-Edge Control on a 60 Degree Clipped Delta Wing Between Mach Numbers of 0.50 and 1.26

Description: Report presenting a free-flight investigation of a rocket-powered research model to determine the hinge-moment and normal-force characteristics of a trailing-edge control on a delta wing between Mach numbers of 0.50 and 1.26. The hinge-line location of 40 percent control chord satisfactorily reduced the high hinge moments associated with plain flap-type controls. Results regarding hinge moments and normal force are provided.
Date: October 30, 1953
Creator: Martz, C. William & Goslee, John W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A pressure-distribution investigation of a fineness-ratio-12.2 parabolic body of revolution (NACA RM-10) at M = 1.59 and angles of attack up to 36 degrees

Description: Report presenting a pressure-distribution investigation of a parabolic body of revolution with a fineness ratio of 12.2, which was performed in the 4- by 4-foot supersonic tunnel at Mach number 1.59 and Reynolds number 3.6 x 10(sub 6), based on body length, for a range of angles of attack. Results regarding basic pressures, aerodynamic coefficients, asymmetrical pressures, comparison of experimental and theoretical pressures, artificial roughness, section coefficients, and body coefficients are… more
Date: October 30, 1952
Creator: Cooper, Morton; Gapcynski, John P. & Hasel, Lowell E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A study of the use of various high-lift devices on the horizontal tail of a canard airplane model as a means of increasing the allowable center-of-gravity travel

Description: Report presenting an investigation to study the use of various high-lift devices on the horizontal tail of a canard airplane model as a means of increasing the allowable center-of-gravity travel. The results indicated that the large increases in allowable center-of-gravity travel could be obtained using the devices. Results regarding the basic aerodynamic data, effect of tail configuration on the allowable center-of-gravity travel, and a comparison of measured and predicted values of the allowa… more
Date: January 21, 1953
Creator: Johnson, Joseph L., Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Effects of a Small Jet of Air Exhausting From the Nose of a Body of Revolution in Supersonic Flow

Description: Report presenting the results of an investigation to determine the effects of a small jet of air exhausting from the nose of an elliptical body of revolution upon boundary-layer transition and the viscous, pressure, and total drag of the forebody at three body stations at Mach number 1.62. The jet effects on body pressure, pressure variations, boundary-layer transition, and total drag are provided.
Date: November 12, 1952
Creator: Love, Eugene S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A Low-Speed Experimental Investigation of the Effect of a Sandpaper Type of Roughness on Boundary-Layer Transition

Description: Report describing the effects of an area of roughness on the velocity and turbulence measurements of an airfoil. It details the effects of the size, location, and height of the roughness on the Reynolds number. From Summary: "An investigation was made in the Langley low-turbulence pressure tunnel to determine the effect of size and location of a sandpaper type of roughness on the Reynolds number for transition."
Date: 1958
Creator: Horton, Elmer A. & von Doenhoff, Albert E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Investigation of the Aerodynamic Characteristics of the NACA RM-10 Missile (With Fins) at a Mach Number of 1.62 in the Langley 9-Inch Supersonic Tunnel

Description: Report presenting an investigation of a fin-stabilized scale model of the NACA RM-10 missile at a Mach number of 1.62. Measurements were made of the lift, drag, and pitching moment of the finned body over a range of angles of attack. Comparisons with the results from other testing facilities are also provided.
Date: December 19, 1952
Creator: Coletti, Donald E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Icing-Protection Requirements for Reciprocating-Engine Induction Systems

Description: Report presenting an investigation of the icing of aircraft-engine induction systems. Criterions for safe operation and for the design of new induction system are established through the investigation. The results were obtained from laboratory investigations of carburetor-supercharger combinations, wind-tunnel investigations of air scoops, multicylinder-engine studies, and flight investigations.
Date: 1950
Creator: Coles, Willard D.; Rollin, Vern G. & Mulholland, Donald R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

An experimental study of five annular air inlet configurations at subsonic and transonic speeds

Description: Report presenting an investigation of an NACA 1-80-100 nose inlet fitted alternately with an elliptical, a parabolic, a 14 degree-inch conical, and a 22 degree-inch conical central body at subsonic and transonic speeds in the 8-foot transonic tunnel. Drag, surface-pressure, and pressure-recovery measurements were obtained at 0 degrees angle of attack through a range of Mach numbers. Results regarding tunnel boundary interference, surface-pressure distribution, external drag, pressure recovery, … more
Date: August 19, 1953
Creator: Pendley, Robert E.; Milillo, Joseph R.; Fleming, Frank F. & Bryan, Carroll R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Comparison of High-Speed Operating Characteristics of Size 215 Cylindrical-Roller Bearings as Determined in Turbojet Engine and in Laboratory Test Rig

Description: A comparison of the operating characteristics of 75-millimeter-bore (size 215) cylindrical-roller one-piece inner-race-riding cage-type bearings was made by means of a laboratory test rig and a turbojet engine. Cooling correlation parameters were determined by means of dimensional analysis, and the generalized results for both the inner- and the outer-race bearing operating temperatures are computed for the laboratory test rig and the turbojet engine. A method is given that enables the designer… more
Date: 1952
Creator: Macks, E. Fred & Nemeth, Zolton N.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel Investigation at Low Speed of a Wing Having 63 Degree Sweepback and a Drooped Tip

Description: From Summary: "The results of force tests made at low speed are presented to show the effect of longitudinal static stability produced by drooping the tip of a 63 degree sweptback wing. Five semispan wing models were tested: two incorporated curved drooped tips, two with abruptly drooped tips, and one without droop. The most favorable stability characteristics were measured for a model with an abruptly drooped tip, a fence, and a leading-edge flap; however, the use of these same auxiliary devic… more
Date: April 7, 1955
Creator: Blackaby, James R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Development of a new flutter testing technique using a towed dynamic airplane model equipped with an automatic stabilizing system: Experimental and calculated dynamic stability characteristics for speeds up to 200 mph

Description: Report presenting testing of a towed airplane model in the 19-foot pressure tunnel in conjunction with the development of a flutter testing technique. The model was equipped with an autopilot to keep the model flying straight and level in the tunnel while restrained only in drag. Results regarding period and cycles to damp to half amplitude, time histories, and motions of the flexible wing model are provided.
Date: March 25, 1955
Creator: Schneider, William C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Simulator studies of a simple homing system

Description: Report presenting simulator studies of a homing missile pursuing a constant-velocity nonmaneuvering target. The missile dynamics in pitch and roll, seeker method of deflection and control, and the missile-target geometry were simulated to determine whether the method of control and detection in conjunction with the missile dynamics were feasible.
Date: October 6, 1955
Creator: Passera, Anthony L. & Garner, H. Douglas
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

An Investigation of Loads on Ailerons at Transonic Speeds

Description: "Some aileron load characteristics for three thin wings varying in sweep have been presented for Mach numbers from 0.80 to 1.05. For the transonic Mach number range, shock effects exert a large influence on the loading, but the exact location of each shock for a specific wing design cannot be cataloged at the present time. It is shown, however, that the aileron loading, although greater in magnitude than at subsonic speeds, nevertheless varies in as uniform a fashion as at subsonic speeds" (p. … more
Date: May 27, 1955
Creator: Runckel, Jack F. & Gray, W. H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen