Search Results

open access

Flight Investigation of Boundary-Layer and Profile-Drag Characteristics of Smooth Wing Sections of a P-47D Airplane

Description: Report presenting a flight investigation made of boundary-layer and profile-drag characteristics of smooth wing sections of a P-47D airplane. Measurements were made at three stations on the wing: boundary-layer measurements, pressure-distribution measurements, and wake surveys. The results indicated that a minimum profile-drag coefficient of 0.0062 for the smooth section at 63 percent semispan was obtained.
Date: October 1945
Creator: Zalovcik, John A.
Partner: UNT Libraries Government Documents Department
open access

Tests of a Heated Low-Drag Airfoil

Description: Report discusses the results of an experimental investigation into the NACA 65,2-016 heated wing. Information about the effect of heating on the drag coefficients, Reynolds numbers, and stability of the laminar boundary layer.
Date: December 1942
Creator: Frick, Charles W., Jr. & McCullough, George B.
Partner: UNT Libraries Government Documents Department
open access

A study of the application of data on various types of flap to the design of fighter brakes

Description: Report presenting an approximate method of applying the available data on various types of flaps in the design of fighter brakes together with several examples of its use. The computed effects of flap type, size, location, and deflection as well as the effects of altitude and initial velocities on braking characteristics are also shown in some examples using the method to determine various flap arrangements.
Date: June 1942
Creator: Purser, Paul E.
Partner: UNT Libraries Government Documents Department
open access

Effect of a Trailing-Edge Extension on the Characteristics of a Propeller Section

Description: Report presenting a convenient technical method to evaluate changes in the airfoil characteristics resulting from an extension of the chord at the trailing edge of a propeller blade section. The method determines the change in the angle of zero lift, the ideal angle of attack, and the difference in these angles as a function of the angle and length of the trailing-edge extension.
Date: September 1944
Creator: Theodorsen, Theodore & Stickle, George W.
Partner: UNT Libraries Government Documents Department
open access

Variation of peak pitching-moment coefficients for six airfoils as affected by compressibility

Description: Report presenting pressure distribution tests of six NACA 16-series propeller sections with 1-foot chords in the 8-foot high-speed tunnel to determine the compressibility effects on peak section pitching-moment coefficients. Data is presented as curves of peak section pitching-moment coefficient against Mach number, thickness ratio, and camber. The peak pitching-moment coefficients were found to occur in the regions of positive and negative stall.
Date: October 1944
Creator: Cleary, Harold E.
Partner: UNT Libraries Government Documents Department
open access

Wind-tunnel investigation of control-surface characteristics 17: beveled-trailing-edge flaps of 0.20, 0.30, and 0.40 airfoil chord on an NACA 0009 airfoil

Description: Report presenting force tests in two-dimensional flow in the 4- by 6-foot vertical tunnel to determine the aerodynamic characteristics of an NACA 0009 airfoil with flaps having chord at 3 locations of the airfoil chord and three degrees of the beveled trailing edges. The results indicated that, with a smooth leading edge, the increased trailing-edge angle on the flaps with sealed gaps decreased the slope of the control-fixed lift curve and the lift effectiveness.
Date: April 1944
Creator: Lockwood, Vernard E.
Partner: UNT Libraries Government Documents Department
open access

Effects of Compressibility on the Maximum Lift Characteristics and Spanwise Load Distribution of a 12-Foot-Span Fighter-Type Wing of NACA 230-Series Airfoil Sections

Description: Lift characteristics and pressure distribution for a NACA 230 wing were investigated for an angle of attack range of from -10 to +24 degrees and Mach range of from 0.2 to 0.7. Maximum lift coefficient increased up to a Mach number of 0.3, decreased rapidly to a Mach number of 0.55, and then decreased moderately. At high speeds, maximum lift coefficient was reached at from 10 to 12 degrees beyond the stalling angle. In high-speed stalls, resultant load underwent a moderate shift outward.
Date: November 1945
Creator: Pearson, E. O., Jr.; Evans, A. J. & West, F. E., Jr.
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel Investigation of Control-Surface Characteristics 15: Various Contour Modifications of a 0.30-Airfoil-Chord Plain Flap on an NACA 66(215)-014 Airfoil

Description: Report presenting force-test measurements in two-dimensional flow made in the 4- by 6-foot vertical tunnel to determine the aerodynamic characteristics of an NACA 66(215)-014 airfoil equipped with true-contour, straight-contour, and beveled-trailing-edge flaps with chords 30 percent of the airfoil chord. The results are presented in the form of aerodynamic section characteristics for several flap deflections and for a sealed and unsealed gap at the flap nose.
Date: December 1943
Creator: Purser, Paul E. & Riebe, John M.
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel Investigation of an NACA 23021 Airfoil With Two Sizes of Balanced Split Flaps

Description: Report presenting an investigation in the 7- by 10-foot wind tunnel of a large-chord NACA 23021 airfoil with a 15-percent-chord and a 25-percent-chord balanced split flap of Clark Y profile, to determine the aerodynamic section characteristics of the airfoil-flap combinations as affected by the size, nose location, and deflection of the flaps.
Date: February 1941
Creator: Swanson, Robert S. & Schuldenfrei, Marvin J.
Partner: UNT Libraries Government Documents Department
open access

Preliminary Report on the Characteristics of the N.A.C.A. 4400R Series Airfoils

Description: Report presenting tests made in the variable-density wind tunnel of airfoils of the NACA 4400 series modified by reflex at the trailing edge designed to reduce the pitching moment to the value of -0.03. The modified airfoils are designated the NACA 4400R series.
Date: March 1939
Creator: Sherman, Albert
Partner: UNT Libraries Government Documents Department
open access

Characteristics of Naca 4400R Series Rectangular and Tapered Airfoils, Including the Effect of Split Flaps

Description: "At the request of the Bureau of Aeronautics, Navy Department, tests were made in the variable-density wind tunnel of a tapered wing of 3-10-18 plan form and based on the NACA 4400R series sections. The wing was also tested with 0.2 chord split flaps, deflected 60 degrees, in the center of the wing and having flat span to wing span ratios of 0.3, 0.5, 0.7, and 1.0, respectively" (p. 1).
Date: January 1941
Creator: Greenberg, Harry
Partner: UNT Libraries Government Documents Department
open access

Wind-tunnel investigation of perforated split flaps for use as dive brakes on a rectangular NACA 23012 airfoil

Description: Report presenting an investigation of the aerodynamic characteristics of a rectangular NACA 23012 airfoil with single and double perforated split flaps in the NACA 7- by 10-foot wind tunnel. A large range of flap spans and deflections and a large range of spanwise and chordwise locations of the flaps were investigated. Results regarding the double split flaps, single split flaps, diving speed, and aileron control are provided.
Date: July 1941
Creator: Purser, Paul E.
Partner: UNT Libraries Government Documents Department
open access

Experimental verification of a simplified vee-tail theory and analysis of available data on complete models with vee tails

Description: Report presenting an analysis of available data on vee-tail surfaces. The analysis indicated that a vee tail designed to provide values of stability and control parameters equal to those provided by a conventional tail would probably provide no reduction in area unless the conventional vertical tail is in a bad canopy wake or unless the vee tail has a higher effective aspect ratio than the conventional vertical and horizontal tails.
Date: January 1945
Creator: Purser, Paul E. & Campbell, John P.
Partner: UNT Libraries Government Documents Department
open access

Determination of the Effect of Horizontal-Tail Flexibility on Longitudinal Control Characteristics

Description: Report presenting an iteration method for determining the longitudinal control characteristics of a flexible horizontal tail. The method permits factors such as the actual spanwise variation of elasticity and the aerodynamic induction effects due to three-dimensional flow to be accounted for to any degree of accuracy needed. An analysis is also included of the effects of horizontal-tail flexibility on the tail effectiveness, the hinge-moment characteristics, and the control-force gradients in a… more
Date: February 1945
Creator: Harmon, S. M.
Partner: UNT Libraries Government Documents Department
open access

Effect of Compressibility on Pressure Distribution Over an Airfoil With a Slotted Frise Aileron

Description: Pressure distribution measurements were made over an airfoil with slotted Frise aileron up to 0.76 Mach at various angles of attack and aileron defections. Section characteristics were determined from these pressure data. Results indicated loss of aileron rolling power for deflections ranging from -12 Degrees to -19 Degrees.
Date: July 1944
Creator: Luoma, Arvo A.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Characteristics of a Slot-Lip Aileron and Slotted Flap for Dive Brakes

Description: From Introduction: "As a part of this investigation, a study is being made of test results obtained during the development of devices designed primarily for other purposes, such as high lift or lateral control, but which may also be used for dive control. These results have been reanalyzed and are herein presented in a form that should make them convenient for design purposes."
Date: April 1941
Creator: Rogallo, F. M.
Partner: UNT Libraries Government Documents Department
open access

Wind-tunnel tests of a blunt-nose aileron with beveled trailing edge on an NACA 66(215)-216 airfoil with several modifications of aileron nose and adjacent airfoil contour

Description: Report presenting an investigation of ailerons with a beveled trialing edge and a blunt-nose overhang of 35 percent aileron chord on an NACA 66(215)-26 airfoil in two-dimensional flow. Five configurations were tested with various modifications of the aileron nose and adjacent airfoil contour to determine the effect of modifications on lift and aileron hinge-moment characteristics.
Date: February 1945
Creator: Bird, J. D.
Partner: UNT Libraries Government Documents Department
open access

Analysis of available data on the effectiveness of ailerons without exposed overhang balance

Description: From Introduction: "As a part of the general lateral-control investigation by the NACA, the large amount of two- and three-dimensional data on the rolling effectiveness of ailerons without exposed overhang balance is collected and analyzed in the present paper."
Date: May 1944
Creator: Crandall, Stewart M. & Swanson, Robert S.
Partner: UNT Libraries Government Documents Department
open access

Wind-tunnel tests of ailerons at various speeds 2: ailerons of 0.20 airfoil chord and true contour with 0.60 aileron-chord sealed internal balance on the NACA 66,2-216 airfoil

Description: Report presenting hinge-moment, lift, pressure difference across the balance, and pressure-distribution measurements in the two-dimensional test section of the stability tunnel on a 0.60 aileron-chord sealed internal-balance aileron on a specified NACA airfoil. The primary test objective was to determine the effect of speed on the action of the aileron.
Date: June 1943
Creator: Denaci, H. G. & Bird, J. D.
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel Tests of Ailerons at Various Speeds 3: Ailerons of 0.20 Airfoil Chord and True Contour With 0.35-Aileron-Chord Frise Balance on the NACA 23012 Airfoil

Description: Report presenting hinge moment, lift, and pressure-distribution measurements made on a Frise aileron on an NACA 23012 airfoil in the two-dimensional test section of the stability tunnel. Speeds up to 360 miles per hour corresponding to a Mach number of about 0.470 were used.
Date: September 1943
Creator: Letko, W. & Kemp, W. B.
Partner: UNT Libraries Government Documents Department
open access

Wind Tunnel Tests of Ailerons at Various Speeds 4: Ailerons of 0.20 Airfoil Chord and True Contour With 0.35 Aileron-Chord Extreme Blunt-Nose Balance on the NACA 23012 Airfoil

Description: Report presenting tests made on an NACA 23012 airfoil fitted with a 20-percent-chord, true-contour aileron with 35-percent-chord, extreme blunt-nose balance. The primary purpose of the investigation was to determine the variation of the aerodynamic characteristics of this type of aileron with airspeed; the effect of variations of gap width and balance-nose radii was also investigated. Results regarding hinge moments, lift, and pitching-moment coefficients are provided.
Date: August 1943
Creator: Anderson, R. A.
Partner: UNT Libraries Government Documents Department
open access

Wind Tunnel Tests of Ailerons at Various Speeds 1: Ailerons of 0.20 Airfoil Chord and True Contour With 0.35 Aileron-Chord Extreme Blunt Nose Balance on the NACA 66,2-216 Airfoil

Description: "Hinge-moment, lift, and pressure-distribution measurements were made in the two-dimensional test section of the NACA stability tunnel on a blunt-nose balance-type aileron on an NACA 66,2-216 airfoil at speeds up to 360 miles per hour corresponding to a Mach number of 0.475. The tests were made primarily to determine the effect of speed on the action of this type of aileron. The balance-nose radii of the aileron were varied from 0 to 0.02 of the airfoil chord and the gap width was varied from 0… more
Date: June 1943
Creator: Letko, W.; Denaci, H. G. & Freed, C.
Partner: UNT Libraries Government Documents Department
open access

Collection of Balanced-Aileron Test Data

Description: "Test data of balanced ailerons have been collected from NACA and British sources. These data, which are presented in the form of charts, are grouped as A - ailerons with Frise balances, B - ailerons with blunt-nose balances, C - ailerons with internal balances, D - ailerons with contour modifications, and E - ailerons with tabs. Results of flight tests and of wind-tunnel tests in both two- and three-dimensional flow are presented but no correlation nor resume of the data has been included" (p.… more
Date: January 1944
Creator: Rogallo, F. M.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen