National Advisory Committee for Aeronautics (NACA) - 124 Matching Results

Search Results

Results: 1 - 24 next
open access

N.A.C.A. Flight-Path Angle and Air-Speed Recorder

Description: "A new trailing bomb-type instrument for photographically recording the flight-path angle and air speed of aircraft in unaccelerated flight is described. The instrument consists essentially of an inclinometer, air-speed meter and a film-drum case. The inclinometer carries an oil-damped pendulum which records optically the flight-path angle upon a rotating motor-driven film drum. The air-speed meter consists of a taut metal diaphragm of high natural frequency which is acted upon by the pressure … more
Date: April 1926
Creator: Coleman, Donald G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The A.N.E.C. IV "Missel Thrush" light airplane

Description: A product of the Air Navigation Engineering Co., the Missel Thrush is a light airplane suitable for private ownership. It is a two seat tractor fuselage biplane with single I interplane struts designed by J. Bewsher.
Date: November 1926
Creator: United States. National Advisory Committee for Aeronautics.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Characteristics of Airfoils 4: Continuation of Reports Nos. 93, 124, and 182

Description: This collection of data on airfoils has been made from the published reports of a number of the leading Aerodynamic Laboratories of this country and Europe. The information which was originally expressed according to the different customs of the several laboratories is here presented in a uniform series of charts and tables suitable for the use of designing engineers and for purposes of general reference. The authority for the results here presented is given as the name of the laboratory at whi… more
Date: September 1926
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Air force and moment for N-20 wing with certain cut-outs

Description: From Introduction: "The airplane designer often finds it necessary, in meeting the requirements of visibility, to remove area or to otherwise locally distort the plan or section of an airplane wing. This report, prepared for the Bureau of Aeronautics January 15, 1925, contains the experimental results of tests on six 5 by 30 inch N-20 wing models, cut out or distorted in different ways, which were conducted in the 8 by 8 foot wind tunnel of the Navy Aerodynamical Laboratory in Washington in 192… more
Date: November 29, 1926
Creator: Smith, R. H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The air forces on a model of the sperry messenger airplane without propeller

Description: From Summary: "This is a report on a scale effect research which was made in the variable-density wind tunnel of the National Advisory Committee for Aeronautics at the request of the Army Air Service. While the present report is of a preliminary nature, the work has progressed far enough to show that the scale effect is almost entirely confined to the drag."
Date: 1926%
Creator: Munk, Max M. & Diehl, Walter S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Albatros Commercial Airplane L 73

Description: The Albatros was a two engine commercial biplane carrying 2 pilots, eight passengers, and 160 KG of baggage. The framework is metal, the wings having plywood and fabric over the steel tubing. The L 73 was the first 2 engine biplane to be made in Germany.
Date: September 1926
Creator: Rühl, Karl & Wiederhold, Hasso
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Albert TE-1 Training Airplane

Description: The TE-1 is designed for the economical training of pilots and is a single seat parasol cantilever monoplane. It is nearly entirely made of wood, using a 40 HP. air-cooled Salmson A.D. 9 engine, and weighs 255 kg empty.
Date: December 1926
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

All-Metal Junkers Airplane, Type F 13

Description: Circular describing the all-metal Junkers airplane, specifically the F 13 type. The primary characteristics of the airplanes are the thick cantilever Junkers wing without stay-wires and the all-metal construction. A description of the design, flight characteristics, and some photographs are provided.
Date: May 1926
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Annual Report for the National Advisory Committee for Aeronautics (11th). Administrative Report Including Technical Reports Nos. 210 to 232

Description: Report includes the National Advisory Committee for Aeronautics letter of submittal to the president, congressional report, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
Date: 1926
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Approximate Calculation of the Static Longitudinal Stability of Airplanes

Description: It seems desirable to have some simple method for calculating quickly and with sufficient accuracy: 1) the correct position of the center of gravity; 2) the requisite tail-group dimensions; 3) and the course of the wing and tail-group moments. In out deductions, we will first replace the biplane (disregarding the effect of stagger, decalage and induced drag) by an equivalent monoplane, whose dimensions and position in space can be approximately determined in a simple manner.
Date: November 1926
Creator: Bienen, Theodor
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Avia Pursuit Airplane B.H. 21

Description: Built by the 'Czecho-Slovakian' aircraft factory, AVIA, the B.H. 21, has a top speed of 250 MPH, and carries 120 kg of gasoline and 20 kg of oil, giving it a radius of action of 600-650 km. It is equipped with a Hispano-Suiza engine capable of 300 HP. Details of the design, structure, wings, stabilizer, fuselage, controls, fuel tanks, landing gear, tail, characteristics, performances, drawings, and photographs are provided.
Date: November 1926
Creator: Serryer, J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Avro "Avian" Airplane: 65 HP. Armstrong-Siddeley "Genet" Engine

Description: The Avro Avian, designed by Mr. Chadwick of A.V. Roe & Co., Ltd. has a very low structural weight (estimated at 750 lbs. empty) but with sufficient structural integrity to be eligible of an "Aerobatics" certificate from the British Air Ministry. It can be configured as a monoplane, or a biplane with seaplane floats. It is designed for economical production.
Date: October 1926
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Behm Acoustic Sounder for Aircraft

Description: The Behm acoustic sounder for aircraft enables the barometric determination for the altitude by night or fog and therefore promises to prove of great importance in safeguarding air traffic.
Date: January 1926
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Bristol "Badminton" Airplane

Description: The Bristol Badminton, Type 99 airplane has a radial aircooled engine (a Bristol Jupiter 9 cylinder 450 HP.) and three fuel tanks. It is a single seat biplane weighing 1,840 lbs. empty and 2,460 lbs. loaded. A description of the design, components, photographs, and drawings are provided.
Date: October 1926
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Calculation of Combining Effects in the Structure of Airplane Wings: A Rational Basis for Estimating the Reduction in the Design Load on Wing Beams Due to the Influence of Ribs and Covering Toward Causing the Beams to Deflect Together

Description: This lecture concerns the combining effects in airplane wings so as to save some of the dead weight. Equations are provided in order to calculate some of the load characteristics and some of the effects to be considered.
Date: June 1926
Creator: Thalau, K.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Calculation of Tubular Radiators of the Automobile Type

Description: "We propose to show how to calculate the cooling capacity of all radiators through which the air flows in separate streamlets, whether enclosed in actual tubes or not and whatever cross-sectional shape the tubes may have. The first part will give the fundamental principles for calculating velocity of air in the tubes and the heat exchange by radiation, conduction and convection, and show, by examples, the agreement of the calculation with experiments. In the second part, the effect of the dimen… more
Date: January 1926
Creator: Richter, L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Central Aerohydrodynamic Institute of Moscow, Russia

Description: The staff and construction of the Institute are described as well as a variety of experiments and researches being conducted there. The six sections of the laboratory are described, including the Section for Theoretical Researches, Section for Aerodynamic Researches, Windmill Section, Section for Engine-Propeller Groups, Section for Material Testing, and Section for Instrument Making. Special attention is given to the various wind tunnels and testing facilities present.
Date: November 1926
Creator: Margoulis, W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Change of 180 Degrees in the Direction of a Uniform Current of Air

Description: In the construction of aerodynamic tunnels, it is a very important matter to obtain a uniform current of air in the sections where measurements are to be made. The straight type ordinarily used for attaining a uniform current and generally recommended for use, has great defects. If we desire to avoid these defects, it is well to give the canals of the tunnel such a form that the current, after the change of direction of its asymptotes, approximates a uniform and rectilinear movement. But for th… more
Date: February 1926
Creator: Witoszynski, C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen